An experimental setup controlling the topochemical transformations in synthesis of ferromagnetic metal nanoparticles is described. The setup is based on a vibrating magnetometer. The range of operating temperatures in the reaction zone is 300–870 K. The required sensitivity is maintained by a magnetic field of up to 0.6 T. Gases (or gas mixtures) may be blown through the reactor at a flow rate as high as 150 cm3/min. The experimental results illustrating the capabilities of the setup are presented.
A new method for obtaining nanosized particles of iron oxides using porous silica gel is proposed. In situ magnetometry was used to study the reduction of hematite deposited on silica gel during the thermolysis of glucose. The formed magnetite and maghemite obtained by subsequent oxidation of the magnetite were studied using X-ray diffraction and Mossbauer spectroscopy. It was shown that both the size of the oxide particles and the phase composition significantly depended on the porous structure of the silica gel. In particular, the formation of superparamagnetic maghemite particles on silica gels with pore sizes of 30, 15 and 10 nm was demonstrated.
Cobalt ferrite nanoparticles of different stoichiometries synthesized by a sol–gel autocombustion method were used as a starting material to obtain high-moment Fe50Co50 and Fe66Co34 metal nanoparticles by topochemical hydrogen reduction. Structural and magnetic investigations confirmed the formation of FeCo nanoparticles with crystallite sizes of about 30 nm and magnetization at 0.5 T of ~265 Am2/kg (0 K), which was larger than the expected bulk value, likely because of the incorporation in the body-centered cubic (bcc) FeCo structure of the residual C atoms present on the surface of the oxide particles. Temperature-dependent magnetization measurements in the H2 atmosphere were also performed to investigate in detail the reduction mechanism and the effect of an external magnetic field on the process efficiency.
Polymer-metal-carbon hybrid nanomaterials based on thermostable electroactive poly-3-amine-7-methylamine-2-methylphenazine (PAMMP), single walled carbon nanotubes (SWCNT), and magnetite (Fe3O4) nanoparticles were synthesized for the first time. Hybrid Fe3O4/SWCNT/PAMMP nanomaterial synthesis was carried out via in situ chemical oxidative polymerization of 3-amine-7-methylamine-2-methylphenazine hydrochloride in the presence of metal-carbon Fe3O4/SWCNT nanocomposites. Fe3O4/SWCNT nanocomposites were obtained by the immobilization of magnetite nanoparticles on the SWCNT surface in the course of Fe3O4 nanoparticles synthesis in alkaline medium. The developed nanocomposite materials were characterized by FTIR spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission (FE-SEM) scanning electron microscopy, atomic absorption spectrometry (AAS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and magnetometry. The chemical structure and phase composition, magnetic and electrical properties, and thermal stability of the obtained multifunctional nanomaterials, depending on synthesis conditions, were investigated.
The effect of external magnetic field on the kinetics of reduction of bulk Co3O4 and silica-supported cobalt oxide (Co3O4/SiO2) with hydrogen has been investigated. The magnetic field exerts an...