9 April 2019 in Journal of Lightwave Technology
We propose a universal and analytic step-by-step method to calculate the optimal 90° and 180° waveguide bends (L-bends and U-bends) in silicon-on-insulator photonics platform. This approach consists of first building an analytic model of loss per unit length as a function of radius of curvature and then using a variational optimization of the bending loss. It is shown that the shape of the optimal bends is ultimately determined either by the radiation loss of tight bends if the curvature of the bend is set to eliminate mode-mismatch losses or by the sidewall roughness loss if the radius of curvature is large. Numerical results from full wave simulations and comparison of the optimal bend with the Bezier, Euler, and Hybrid Euler-Circular bend are also provided to show the validity of our approach.
30 March 2018 in Journal of Lightwave Technology
A detailed analysis of fundamental tradeoffs between ring radius and coupling gap size is presented to draw realistic borders of the possible design space for microring resonators (MRRs). The coupling coefficient for the ring-waveguide structure is estimated based on an integration of the nonuniform gap between the ring and the waveguide. Combined with the supermode analysis of two coupled waveguides, this approach is further expanded into a closed-form equation that describes the coupling strength. This equation permits to evaluate how the distance separating a waveguide from a ring resonator, and the ring radius, affect coupling. The effect of ring radius on the bending loss of the ring is furthermore modeled based on the measurements for silicon MRRs with different radii. These compact models for coupling and loss are subsequently used to derive the main optical properties of MRRs, such as 3-dB optical bandwidth, extinction ratio of resonance, and insertion loss, hence identifying the design space. Our results indicate that the design space for add-drop filters in a wavelength division multiplexed link is currently limited to 5-10 μm in radius and gap sizes ranging from 120 to 210 nm. The good agreement between the results from the proposed compact model for coupling and the numerical FDTD and experimental measurements indicate the application of our approach in realizing fast and efficient design space exploration of MRRs in silicon photonic interconnects.
10 February 2020 in Proceedings of the IEEE
Deep learning is revolutionizing many aspects of our society, addressing a wide variety of decision-making tasks, from image classification to autonomous vehicle control. Matrix multiplication is an essential and computationally intensive step of deep-learning calculations. The computational complexity of deep neural networks requires dedicated hardware accelerators for additional processing throughput and improved energy efficiency in order to enable scaling to larger networks in the upcoming applications. Silicon photonics is a promising platform for hardware acceleration due to recent advances in CMOS-compatible manufacturing capabilities, which enable efficient exploitation of the inherent parallelism of optics. This article provides a detailed description of recent implementations in the relatively new and promising platform of silicon photonics for deep learning. Opportunities for multiwavelength microring silicon photonic architectures codesigned with field-programmable gate array (FPGA) for pre- and postprocessing are presented. The detailed analysis of a silicon photonic integrated circuit shows that a codesigned implementation based on the decomposition of large matrix-vector multiplication into smaller instances and the use of nonnegative weights could significantly simplify the photonic implementation of the matrix multiplier and allow increased scalability. We conclude this article by presenting an overview and a detailed analysis of design parameters. Insights for ways forward are explored.
7 December 2017 in Journal of Lightwave Technology
Heating elements are used to tune the optical properties of silicon photonic devices, to stabilize operating temperatures, and to compensate for fabrication variations. In this paper, we characterize the transient thermal response and develop models for silicon photonic devices equipped with such heating mechanisms. To demonstrate the usefulness and practicality of the proposed models, we investigate pulse width modulation (PWM) drive scheme for microheaters and experimentally demonstrate its use in stabilizing microring resonators by digital driving signals (two-level voltage). Requirements on the drive frequency and duty cycle of the PWM signal to minimize optical power penalties owing to the undesired thermal ripples are discussed based on the accurately modeled thermal frequency response of the heater-ring system. It is shown that smaller duty cycles require higher drive frequencies and the maximum optical ripple for a microring resonator occurs at 65% duty cycle.
7 July 2016 in Journal of Lightwave Technology
We examine inter-channel and intra-channel crosstalk power penalties between non-return-to-zero on-off keying (NRZ-OOK) wavelength-division-multiplexing (WDM) channels for microring-based silicon photonic interconnects. We first propose a new model that relates the crosstalk power penalty to the interfering signals power, the extinction ratio of the non-return-to-zero, OOK modulated “victim” channel, and finally the bit-error-ratio that the power penalty is referenced to. As for inter-channel crosstalk, the proposed model agrees well with our recent experimental measurements. We leverage this model to quantify crosstalk induced power penalties in a microring based WDM receiver. We also propose an optimization procedure to equilibrate the power penalty across channels. We then compare our model with intra-channel crosstalk measurements, where two NRZ channels are at the same wavelength and are simultaneously routed to different paths by two cascaded ring resonators. We remark that intra-channel crosstalk is very sensitive to the data rate of NRZ channels. As data rate increases, the observed disturbances exceed what models predict. Based on these observations, we propose an empirical modification of the original model for estimating intra-channel crosstalk power penalties in high (>20 Gb/s) data rate situations.
17 April 2019 in IEEE Journal of Selected Topics in Quantum Electronics
We propose and analyze a scalable microring-based Clos switch fabric architecture constructed with switch-and-select switching stages. A silicon 4×4 building block that was designed and fabricated through AIM Photonics is used for the proof-of-principle demonstration of a 16×16 Clos switch fabric. By fully blocking the first-order crosstalk, the 4×4 device is measured to show a crosstalk ratio in the range of -57 dB to -48.5 dB, enabling better than -39 dB crosstalk for the 16×16 switch. Our study shows that the three-stage Clos design enables up to a factor of 4 in the reduction of the number of switching cells compared to single-stage switch-and-select fabrics. We further explore the design space for both first-order and second-order switching elements using the foundry-validated parameters and how these factors impact the performance and scalability of the three-stage Clos switch. A detailed power penalty map is drawn for Clos switch fabrics with various scales, which reveals that the ultimate key limiting factor is the shuffle insertion loss. An optimized 32-port Clos switch fabric using foundry-enabled parameters is shown to have a less than 10 dB power penalty.