23 April 2021 in IEEE Access
This article presents a novel charge-controlled memristor emulator circuit. The proposed memristor emulator utilizes a single Current Follower Transconductance Amplifier (CFTA) as an active current mode analog building block and a grounded capacitor as a passive element. The circuit presented follows all the fingerprints of an ideal memristor. It operates in both incremental as well as decremental mode. The functional performance of the emulator circuit is verified at different operating frequencies and performs well up to 9 MHz. The theoretical and non-ideal analyses are verified for the proposed emulator. Moreover, Monte Carlo sampling and non-volatility analysis are performed to investigate the robustness of the emulator circuit. The functionality of the proposed model has been verified through PSPICE simulation using TSMC 0.18 μm CMOS technology at the supply voltage of ±1.2 V. The experimental confirmation of the presented circuit is also performed by building a breadboard micromodel using ICs CA3080 and AD844AN. Memristor based Chua's circuit model is included as one of its applications.
31 August 2022 in IEEE Canadian Journal of Electrical and Computer Engineering
This article demonstrates a voltage differencing inverting buffered amplifier (VDIBA)-based resistorless flux-controlled memristor emulator circuit with tunability. Two VDIBA blocks serve as active components, and a grounded capacitor serving as a passive part. The proposed emulator design is devoid of multipliers and resistors through effective utilization of port relationships. Including tunability, the suggested emulator functions in both incremental and decremental modes. It accurately depicts the attributes of an ideal memristor up to 12.7 MHz and consumes a total power of 1.34 mW. The mathematical analysis is substantiated through Cadence simulation in 0.18- $\mu$ m Taiwan Semiconductor Manufacturing Company (TSMC) technology with the supply voltage of $\pm$ 1 V. Nonideal, single/parallel, Monte-Carlo sampling and corner analysis were conducted to confirm circuit resilience. The nonvolatile nature of the presented emulator model has also been included. A breadboard prototype incorporating the ICs CA3080 and LT1193 are built to conduct an experimental demonstration. The experimental findings were consistent with the theoretical expectations and simulation results.
6 February 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
The realization of memristor devices with specific operating parameters is a challenging task, which drives innovation in emulation circuits. This article offers a simple and novel resistorless memristor emulator design with an electronic controllability feature. The proposed model is suitable for both floating and grounded memristor applications and can operate in incremental/decremental modes effectively without switches. The proposed model comprises a voltage differencing current conveyor (VDCC) and an operational transconductance amplifier (OTA) as active components and requires a single capacitor as its passive element. This model emulates the memristors pinched hysteresis loop in current-voltage (I-V) plane. Simulation is carried out for a 180 nm CMOS technology with a supply voltage of 10.9 V. The proposed design exhibits non-linear behavior for a wide range of input voltage and operates well up to 8 MHz. The reliability and robustness of the proposed design have been verified for short-term non-volatility, temperature variation, Monte-Carlo and process corner analysis. The experimental verifications are carried out on a breadboard using ICs AD844 and CA3080.