Light-emitting diodes are nowadays the most dynamically developing type of light sources. Considering that temperature is the main factor affecting the electrical and lighting parameters of these devices, thermal models are essential subcomponents of the multidomain models commonly used for simulation of their operation. The authors investigated white power light-emitting diodes soldered to Metal Core Printed Circuit Boards (MCPCBs). The tested devices were placed in a light-tight box on a cold plate and their cooling curves were registered for different diode heating current values and various preset cold plate temperatures. These data allowed the computation of optical and real heating power values and consequently the generation of compact thermal models in the form of Foster and Cauer RC ladders. This also rendered possible the analysis of the influence of the considered factors on the compact model element values and their parametrization. The resulting models yield accurate values of diode junction temperature in most realistic operating conditions and they can be easily included in multidomain compact models of power light emitting diodes.
1 January 2017 in Bulletin de la Société des Sciences et des Lettres de Łódź. Série: Recherches sur les Déformations
The estimation of the heat transfer coefficient values for still air condition case is considered in this paper. The mentioned values are estimated using the analytical and numerical methods. The numerical solutions have been obtained using the Newton-Raphson algorithm, Levenberg-Marquardt algorithm and the conjugate gradient method. The obtained results have been precisely discussed. Moreover, comparison of the evaluation time, number of iterations and quality of solutions have been included. Apart from that, the accuracy of yielded findings is also demonstrated.
1 January 2017 in Bulletin de la Société des Sciences et des Lettres de Łódź. Série: Recherches sur les Déformations
In this paper the dependence between heat transfer coefficient and temperature rise is considered. The results are obtained using the two different groups of algorithms. In the first group, swarm intelligence algorithms, the ant colony optimization and bee colony optimization algorithms are taken into consideration. In the second group, the genetic algorithms are presented. The received solutions are discussed in detail and compared between each other. Moreover, the evaluation time, accuracy and number of iterations of these algorithms are also demonstrated and compared.
1 January 2017 in Bulletin de la Société des Sciences et des Lettres de Łódź. Série: Recherches sur les Déformations
This paper presents the comparison of temperature distributions in nanometric multilayer electronic structure obtained using Fourier-Kirchhoff and Dual-Phase-Lag models. The numerical solution has been obtained using FEM method. Simulation results are precisely described and discussed. Thermal model, which is more relevant for nanometric electronic structures, is indicated.