Light-emitting diodes are nowadays the most dynamically developing type of light sources. Considering that temperature is the main factor affecting the electrical and lighting parameters of these devices, thermal models are essential subcomponents of the multidomain models commonly used for simulation of their operation. The authors investigated white power light-emitting diodes soldered to Metal Core Printed Circuit Boards (MCPCBs). The tested devices were placed in a light-tight box on a cold plate and their cooling curves were registered for different diode heating current values and various preset cold plate temperatures. These data allowed the computation of optical and real heating power values and consequently the generation of compact thermal models in the form of Foster and Cauer RC ladders. This also rendered possible the analysis of the influence of the considered factors on the compact model element values and their parametrization. The resulting models yield accurate values of diode junction temperature in most realistic operating conditions and they can be easily included in multidomain compact models of power light emitting diodes.
This paper presents an analysis of the time complexity of algorithms prepared for solving heat transfer problems at nanoscale. The first algorithm uses the classic Dual-Phase-Lag model, whereas the second algorithm employs a reduced version of the model obtained using a Krylov subspace method. This manuscript includes a description of the finite difference method approximation prepared for analysis of the real microelectromechanical system (MEMS) structure manufactured by the Polish Institute of Electron Technology. In addition, an approximation scheme of the model, as well as the Krylov subspace-based model order reduction technique are also described. The paper considers simulation results obtained using both investigated versions of the Dual-Phase-Lag model. Moreover, the relative error generated by the reduced model, as well as the computational complexity of both algorithms, and a convergence of the proposed approach are analyzed. Finally, all analyses are discussed in detail.
This paper presents an analysis related to thermal simulation of the test structure dedicated to heat-diffusion investigation at the nanoscale. The test structure consists of thin platinum resistors mounted on wafer made of silicon dioxide. A bottom part of the structure contains the silicon layer. Simulations were carried out based on the thermal simulator prepared by the authors. Simulation results were compared with real measurement outputs yielded for the mentioned test structure. The authors also propose the Grünwald–Letnikov fractional space-derivative Dual-Phase-Lag heat transfer model as a more accurate model than the classical Fourier–Kirchhoff (F–K) heat transfer model. The approximation schema of proposed model is also proposed. The accuracy and computational properties of both numerical algorithms are presented in detail.
This paper presents the comparison of temperature distributions in nanometric multilayer electronic structure obtained using Fourier-Kirchhoff and Dual-Phase-Lag models. The numerical solution has been obtained using FEM method. Simulation results are precisely described and discussed. Thermal model, which is more relevant for nanometric electronic structures, is indicated.
1 January 2017 in Bulletin de la Société des Sciences et des Lettres de Łódź. Série: Recherches sur les Déformations
The estimation of the heat transfer coefficient values for still air condition case is considered in this paper. The mentioned values are estimated using the analytical and numerical methods. The numerical solutions have been obtained using the Newton-Raphson algorithm, Levenberg-Marquardt algorithm and the conjugate gradient method. The obtained results have been precisely discussed. Moreover, comparison of the evaluation time, number of iterations and quality of solutions have been included. Apart from that, the accuracy of yielded findings is also demonstrated.