Conventional fillers have limitations on the modification of proton exchange membranes because of differences in the sizes and physicochemical properties of matrix molecules. Designing skeleton molecules is a vital way to address the limitations by enabling precise distribution in the matrix and inducing automatic nanoscale aggregation and separation of hydrophilic–hydrophobic phases. In this work, a novel SDF-PAEK polymer was synthesized with a rigid hydrophobic backbone, short high-density trifluoromethyl side chains and long flexible aliphatic pendant side chains as a skeleton molecule for the Nafion membrane. Due to the unique molecular interaction selectivity during the membrane formation process, SDF-PAEK automatically matches the Nafion molecular conformation by self-assembly. Combining an improved solution formulation and membrane-casting method, the degree of composition can therefore rise to 20%, which can effectively reduce the cost. Morphological studies show that there is a certain degree of bicontinuous phase microcrystalline domains, and the proton transport channels are highly concentrated. In contrast to the Nafion membrane, SDF-PAEK@Nafion-15% exhibits better performances with higher selectivity (9.73 × 104 S s cm−3) and single-cell maximum power density (PDmax–139 mW cm−2, at 80 °C), which demonstrates the feasibility of SDF-PAEK as a novel PEM skeleton molecule for fuel cell applications.
Although the SiC MOSFETs with square or hexagonal designed cells have a small on-resistance, the electric fields of sharp corners within these designed cells lead to the reduction of blocking voltage. The SiC MOSFETs with linear cells can maintain the blocking voltage, while the relatively large cell usually increases the on-resistance and power consumption. In this article, we designed and fabricated the SiC MOSFETs with linear cells and interrupted linear cells whose N + region is embedded with the P + region. Then we compare their characteristics of specific on-resistance, forward characteristic, and blocking voltage, and report the demonstration of a high-voltage 4H-silicon carbide (SiC) MOSFETs with 20% losses of on-resistance by interrupting the N + region with P + region. We provide a new linear cell design that can effectively reduce the on-resistance of 1200 V SiC MOSFET and maintain the blocking voltage.