Sang-Hyun Ahn

Sang-Hyun Ahn

Auto-generated profile, based on publicly available information

Sang-Hyun Ahn

Department of Nuclear Equipment Qualification & Safety Korea Institute of Machinery and Materials 46744 Busan Korea

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2022 in Processes
Verified
Journal Article
Open access
PDF file
JCJungsoo Choi
Jungsoo Choi
RKRyoonhan Kim
Ryoonhan Kim
DSdanbi Song
danbi Song
DCDae-Won Cho
Dae-Won Cho
JSJEONG SUH
JEONG SUH
SASang-Hyun Ahn
Sang-Hyun Ahn
In this study, the laser cutting characteristics were analyzed according to the shape of the back side of the specimen, and the laser cutting characteristics were compared according to the thickness of the edge (10 mm, 20 mm, and 30 mm). A Yb-YAG laser was used in this study, and the cutting target was STS304 with a thickness of 50 mm, and the cutting process was analyzed using a high-speed camera. In the experiment, it was found through image analysis that the cutting performance was excellent at 30 mm thickness of the edge. In order to analyze this reason, a thermal conduction analysis (numerical simulation) was performed, and it was confirmed that the thicker thickness of the edge caused a preheating effect during laser cutting due to a large amount of heat accumulation. This effect can be used as a reference for the initial processing state while cutting thick metals as it is a characteristic that has not been revealed before.

27 September 2022 in Processes
Verified
Journal Article
Open access
PDF file
UTUpendra Mani Tuladhar
Upendra Mani Tuladhar
SASang-Hyun Ahn
Sang-Hyun Ahn
DCDae-Won Cho
Dae-Won Cho
DKDae-Hwan Kim
Dae-Hwan Kim
SASeokyoung Ahn
Seokyoung Ahn
TPTae-Kook Park
Tae-Kook Park
Consistency in gas flow behavior under various operating conditions is expected for uniform cutting performance in the thermal cutting process. The slope of the cut front in the kerf slot of a sample cutting material varies with the operating condition which affects the gas flow pattern. Therefore, how the nozzle exit diameter and the slope of the cut front effects gas flow behavior has been studied using the Reynolds averaged Navier–Stokes (RANS) based k–ω turbulence model. Convergent–straight-type nozzles with exit diameters φexit of 1.5 mm, 2 mm and 2.5 mm were used to study the flow patterns through the kerf slots of variable cut front slopes. The numerical simulation results were then compared with the results obtained from the Schlieren experiments. In addition, image processing was performed in the Schlieren images for clear visualization and precise comparison of the numerical and experimental data. The results confirm that a nozzle with an exit diameter of 2 mm shows a higher consistency in flow behavior in variable operating conditions.

23 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
UTUpendra Mani Tuladhar
Upendra Mani Tuladhar
SASang-Hyun Ahn
Sang-Hyun Ahn
DCDae-Won Cho
Dae-Won Cho
DKDae-Hwan Kim
Dae-Hwan Kim
SASeokyoung Ahn
Seokyoung Ahn
TPTae-Kook Park
Tae-Kook Park
The dynamics of high-pressure gas flow injected through a nozzle during a thermal cutting process has an important effect on cutting performance. In this study, an actual gas flow condition inside a cut kerf of a plasma cut sample was simulated by considering various geometric features of the cut kerf, such as kerf width difference and cutting length difference between the top and bottom surfaces. A prototype cut kerf shape was fabricated using a transparent material. A gas flow shadowgraph from inside the fabricated cut kerf was observed using the Schlieren method. In addition, image processing was performed on images obtained with the Schlieren method before and after gas injection, which were used to validate the numerical simulation models. The effect of turbulent viscosity in various turbulent models was studied using computational fluid dynamics analyses. The results confirmed that the k–ω turbulent model was the most suitable turbulent model for the geometry used in this study. The simulation results for this model were qualitatively consistent with the reported experimental measurements.

31 August 2023 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
SASang-Hyun Ahn
Sang-Hyun Ahn
JBJun Sun Bae
Jun Sun Bae
DCDae-Won Cho
Dae-Won Cho
DKDae-Hwan Kim
Dae-Hwan Kim
SBSeung-Hoon Bae
Seung-Hoon Bae
DCDoo Jin Choi
Doo Jin Choi
In gas metal arc welding, the molten pool is affected by gravity and this affects welding phenomena. This study investigated the changes in bead shape and metal transfer mode caused by the molten-pool behavior. We conducted gas metal arc welding with various welding positions. Images from high-speed camera and signals from current and voltage sensors were used to determine the differences with welding positions. Bead shapes were quantified through transverse cross-sectional bead images and image processing. Molten-pool images from the camera were analyzed through the molten-pool length and distance from the wire position. These were used to explain the differences between transverse and longitudinal cross-sectional bead images with welding positions. Changes in metal transfer based on current and voltage signals were investigated. To determine the exact change in metal transfer, the number of short-circuit transfers and spray transfers within the same time was captured by the welding position camera.

20 May 2024 in Processes
Verified
Journal Article
Open access
PDF file
TNTaeHyung Na
TaeHyung Na
GJGwang-Ho Jeong
Gwang-Ho Jeong
KKKiyoung Kim
Kiyoung Kim
YKYongdeog Kim
Yongdeog Kim
JBJunsung Bae
Junsung Bae
DCDae-Won Cho
Dae-Won Cho
This study investigated how welding affects the thermal deformation of square cells produced for casks, which are dry storage containers for spent nuclear fuel. We aimed to minimize structural deformation by utilizing STS316L as the material for the square cells. We explored a method of subdividing the square cells and joining them through butt welding. Keeping the upper plate thickness constant, GTA butt welding was conducted while varying the column’s wall thickness, followed by measurement with a laser vision sensor. The heat conduction and thermal strain were then calculated using a finite element analysis (FEM). Both experimental and analytical results confirmed that there was significant thermal deformation in the cases of thick-walled columns due to variations in heat conduction distribution, with the resulting deformation patterns depending on thickness.

31 October 2024 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
JBJunsung Bae
Junsung Bae
SASang-Hyun Ahn
Sang-Hyun Ahn
GJGwang-Ho Jeong
Gwang-Ho Jeong
SKSeonmin Kim
Seonmin Kim
DCDae-Won Cho
Dae-Won Cho
SASeokyoung Ahn
Seokyoung Ahn
Many industries, such as automobile, aerospace, heavy industries, etc, have been interested in welding automation due to cost reduction and improving productivity. For welding automation, seam tracking plays an important role for the quality of welds. If the seam is misaligned, it can cause troubles such as weld defects and poor appearance. Most of previous studies have analyzed the influence on the bead shape and weld defects by current, voltage, welding speed, but there is lack of research regarding the effects of misaligned seam, called offset. Thus, in this study, fillet welds were conducted with flux-cored arc welding, which has high welding efficiency and low cost. To find out the guideline of offset, various offsets were intentionally applied to the welding experiments, and the changes in bead shape were observed and weld defects were detected for various combination of offset and welding speed. In addition, the grades of weld defect in each condition were evaluated by ISO 5817, which illustrates the international standard of weld defects. Based on the results, the guidelines of offset was suggested to avoid weld defects.