18 September 2024 in IEEE Transactions on Electron Devices
A compact electrothermal model of vertical gate-all-around (VGAA) transistors is developed in this work. Owing to the structural asymmetry inherent in VGAA devices, the internal thermal conduction of such devices differs from that of lateral gate-all-around (LGAA) transistors. The self-heating effect (SHE) of VGAA and thermal optimization is investigated through numerical simulation, revealing a 53% decrease in the temperature rise by changing the spacer material from SiO2 to Si3N4. In addition, a physics-based thermal model with geometry dependence is demonstrated, which captures the four-stage temperature traces of VGAA and supports technology optimization. The physics-based thermal model was verified through TCAD simulation and was subsequently employed to assess the electrothermal performance at the device-circuit level.
12 June 2023 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
This work proposes a statistical modeling approach for the artificial neural network (ANN)-based compact model (CM). The method of retaining part of the network features of the nominal device and further finetuning the network parameters (variational neurons) is found to accurately reproduce the static variation. A mapping from process variation to network parameters is derived by combining the proposed variational neuron selection algorithm and the backward propagation of variance (BPV) method. In addition, a secondary classification of the selected variational neurons is applied to model the fabrication-induced correlation between n- and p-type devices. The neural network-based statistical modeling approach has been well implemented and verified on the GAA simulation data and the 16nm node foundry FinFET, which indicates its great potential in modeling emerging and advanced device technology.
8 December 2023 in IEEE Transactions on Electron Devices
This article presents the parasitic capacitance and resistance models specifically for advanced vertical gate-all-around (VGAA) nanosheet FETs. By combining regional analysis with the three fundamental capacitance modules, the parasitic capacitance components are defined and subsequently modeled individually. The parasitic resistance is also divided into components based on the current path analysis. By combining the modified transmission line method, spread, and thin film resistance formulations, a comprehensive resistance model is worked out covering structural parameter variations. In addition, the model also considers possible VGAA layouts, namely, the L type and Line type. The developed parasitic models have undergone extensive verification across a broad spectrum of parameters, confirming their accuracy and scalability. The proposed models were implemented into the calibrated Berkeley short-channel IGFET model (BSIM)-CMG models, facilitating the prediction of circuits such as ring oscillators, and their implications on the unique asymmetric source-drain structure are also discussed. This work provides strategic guidance for the design technology co-optimization of advanced VGAA technology.
22 May 2025 in IEEE Transactions on Electron Devices
The emerging backside power delivery network (BSPDN) technology offers significant advantages in area scaling, IR drop reduction, and operating frequency enhancement. In this work, we systematically investigate the thermal dissipation mechanisms associated with various BSPDN architectures and develop SPICE-compatible dynamic thermal models to facilitate model-driven evaluation for electrical and thermal dynamics at the device-circuit level. A comprehensive evaluation, coupled with the previously developed parasitic model, reveals that the parasitic effects dominate circuit dynamic performance compared to self-heating effects (SHEs), while the SHE exacerbates device degradation mechanisms, such as hot carrier injection (HCI) and bias temperature instability (BTI). Evaluation results indicate that backside contacts (BSCs) are more capable of suppressing SHEs and parasitic effects, while through silicon via in middle-of-line (MOL) (TSVM)-based circuits experience pronounced performance degradation, enabling a model-driven tradeoff strategy for circuit optimization in advanced technology.
28 May 2024 in IEEE Transactions on Electron Devices
An accurate physics-based capacitance model is developed covering full-region operations of silicon TFET (Si-TFET) with all biasing conditions. The intrinsic and parasitic capacitances are modeled by the surface-potential-based method and justified by calibrated TCAD simulations. To address the challenges of a classical physics-based model in calculating the charge partitions, an artificial neural network (ANN)-enhanced method is proposed to capture the terminal partition strategy, which features good smoothness and high accuracy. The results show a source terminal partition of the ambipolar region in the range of 90%–100%, and the drain partition of the normal region is in the range of 85%–100%, with in-between partitions of the transition regions. This ANN-enhanced physics-based model addresses the requirements of a TFET channel charge partition strategy and has been verified in circuit simulations with improved accuracy.
17 July 2025 in IEEE Transactions on Electron Devices
This article presents a parasitic capacitance model for gate-all-around (GAA) nanosheet FETs (NsFETs) with backside power delivery network (BSPDN) including three types of techniques buried power rail (BPR), through Silicon Via in MOL (TSVM), and backside contact (BSC). Based on the electrical field analysis and elliptical integral method, the different parasitic capacitance components are extracted and accurately modeled. In addition, the variation in parasitic capacitance components with the structural parameters is also investigated for design optimization of NsFETs with BSPDN. The extra parasitic capacitance induced by the TSVM, BPR, and BSC accounts for about 19.4%, 14.1%, and 7.4% in the ${C}_{\textit {gs}\_{\textit {para}}}$ (or ${C}_{\textit {gd}\_{\textit {para}}}\text {)}$ , respectively. Furthermore, the proposed models were integrated into a calibrated NsFET model, enabling an analysis of the parasitic capacitance induced by the BSPDN in the MEOL at the prelayout stage. The dynamic performance of the circuits, such as ring oscillators, is evaluated under various geometric parameters. This work provides insight into the design technology co-optimization of BSPDN technology in advanced nodes.