With the technological scaling of metal–oxide–semiconductor field-effect transistors (MOSFETs) and the scarcity of circuit design margins, the characteristics of device reliability have garnered widespread attention. Traditional single-mode reliability mechanisms and modeling are less sufficient to meet the demands of resilient circuit designs. Mixed-mode reliability mechanisms and modeling have become a focal point of future designs for reliability. This paper reviews the mechanisms and compact aging models of mixed-mode reliability. The mechanism and modeling method of mixed-mode reliability are discussed, including hot carrier degradation (HCD) with self-heating effect, mixed-mode aging of HCD and Bias Temperature Instability (BTI), off-state degradation (OSD), on-state time-dependent dielectric breakdown (TDDB), and metal electromigration (EM). The impact of alternating HCD-BTI stress conditions is also discussed. The results indicate that single-mode reliability analysis is insufficient for predicting the lifetime of advanced technology and circuits and provides guidance for future mixed-mode reliability analysis and modeling.
18 September 2024 in IEEE Transactions on Electron Devices
A compact electrothermal model of vertical gate-all-around (VGAA) transistors is developed in this work. Owing to the structural asymmetry inherent in VGAA devices, the internal thermal conduction of such devices differs from that of lateral gate-all-around (LGAA) transistors. The self-heating effect (SHE) of VGAA and thermal optimization is investigated through numerical simulation, revealing a 53% decrease in the temperature rise by changing the spacer material from SiO2 to Si3N4. In addition, a physics-based thermal model with geometry dependence is demonstrated, which captures the four-stage temperature traces of VGAA and supports technology optimization. The physics-based thermal model was verified through TCAD simulation and was subsequently employed to assess the electrothermal performance at the device-circuit level.
8 December 2023 in IEEE Transactions on Electron Devices
This article presents the parasitic capacitance and resistance models specifically for advanced vertical gate-all-around (VGAA) nanosheet FETs. By combining regional analysis with the three fundamental capacitance modules, the parasitic capacitance components are defined and subsequently modeled individually. The parasitic resistance is also divided into components based on the current path analysis. By combining the modified transmission line method, spread, and thin film resistance formulations, a comprehensive resistance model is worked out covering structural parameter variations. In addition, the model also considers possible VGAA layouts, namely, the L type and Line type. The developed parasitic models have undergone extensive verification across a broad spectrum of parameters, confirming their accuracy and scalability. The proposed models were implemented into the calibrated Berkeley short-channel IGFET model (BSIM)-CMG models, facilitating the prediction of circuits such as ring oscillators, and their implications on the unique asymmetric source-drain structure are also discussed. This work provides strategic guidance for the design technology co-optimization of advanced VGAA technology.
14 September 2021 in IEEE Transactions on Electron Devices
We report GaN vertical trench MOS barrier Schottky (TMBS) diodes with embedded p-GaN shielding rings (SRs) and systematically investigate the impact of different structural parameters of the p-GaN SRs on the breakdown performance of the GaN-based vertical TMBS diodes by numerical simulation. The charge coupling effect by the embedded p-n junction at the bottom of the trench homogenize the electric field at the trench corner and alleviate the electric field crowding effect at the Schottky contact region, which can effectively avoid the premature breakdown and improve the reverse blocking capability of the TMBS diodes. The p-GaN SRs can also broaden the overlapped depletion region and shift the pinch-off point into the n − -GaN drift region, thus facilitating the 2-D depletion in the n − -GaN drift layer and boosting the breakdown performance of the conventional TMBS diodes. We found that the doping concentration, thickness, and the width of the p-GaN SRs are closely associated with the electric field distribution and the reverse breakdown characteristics of the GaN-based vertical TMBS diodes. The vertical TMBS diodes with optimal p-GaN SR parameters featured a dramatic improvement in the breakdown voltage from 907 to 1281 V, without an obvious degradation in the ON performance. The proposed TMBS diodes with a p-GaN SR structure can pave the way toward a high-performance GaN vertical power device for high-power and high-efficiency power switch applications.
11 May 2022 in IEEE Transactions on Electron Devices
We report GaN-based vertical Schottky barrier diodes (SBDs) with embedded floating islands (FIs). The incorporation of FI structure can break the theoretical limit of unipolar vertical GaN devices by homogenizing the electric field distribution within the drift layer. To facilitate comprehensive understanding and structural design of FI SBDs, analytical models for both conducting state and blocking state of GaN FI SBDs are established and verified by TCAD simulation. Parametric optimization for the reverse characteristics of GaN FI SBDs is also carried out systematically. We found that the doping concentration, height of p-GaN FIs, and spacing between adjacent p-GaN FIs are closely associated with the electric field distribution and the reverse breakdown characteristics of vertical FI SBDs. An optimum Baliga’s figure of merit (FOM) of 4.98 GW/cm 2 can be achieved, which features a 79.14% enhancement compared with the conventional SBD. The results can provide systematic design guidelines for GaN vertical power electronic systems toward high-voltage, high-speed, and high-power applications.
23 June 2022 in IEEE Journal of the Electron Devices Society
In this paper, we systematically investigated the impact of the key structural parameters on the reverse and forward characteristics of gallium nitride (GaN) based vertical merged pn-Schottky (MPS) diode by numerical simulation. In comparison with conventional GaN-based vertical Schottky barrier diode, the MPS structure can suppress the high electric field at the Schottky interface with the inserted p-GaN, thereby enhancing the reverse breakdown characteristics. However, the adoption of the p-GaN structure can result in a locally crowded electric field at reserve bias condition and thus a premature breakdown of the device. Moreover, the p-GaN structure depletes the vertical channel region, which may degrade the on-performance at forward bias condition. We found that the doping concentration, width, and depth of the p-GaN structure are closely correlated with the electric field distribution at reverse bias and the channel resistance at forward bias, and thus determines the reverse and forward characteristics of the MPS diodes. The unique forward unipolar/bipolar characteristics of the MPS diode was also investigated and discussed systematically. The results can pave the way for the development of GaN power electronic devices towards a compact high-frequency and high-voltage power electronic system.