Excellent performance (995 muA/mum at Ioff=94 n A/mum and Vdd=lV) and short channel effect control are achieved for tall, narrow FinFETs without mobility enhancement. Near-ideal fin/gate profiles are achieved with standard 193 nm immersion lithography and dry etch. PVD TiN electrodes on Hf SiO dielectrics are shown to give improved NMOS performance over PEALD TiN whilst poorer conformality, for both dielectric and gate electrode, does not appear to impact scalability or performance. Excellent PMOS performance is achieved for both PEALD and PVD TiN. A new model for threshold voltage VTvariability is shown to explain this dependence upon fin width and gate length.
To get stable perpendicularly magnetized tunnel junctions at small device dimensions, composite free layers that comprise two MgO/FeCoB interfaces as sources of interface anisotropy are generally used. Proper cristallisation and annealing robustness is typically ensured by the insertion of a spacer layer of the early transition metal series within the FeCoB layer. We study the influence of the spacer thickness and growth condition on the switching metrics of tunnel junctions thermally annealed at 400°C for the case of 1-4 Å Ta spacers. Thick Ta spacer results in a large anisotropies indicative of a better defined top FeCoB/MgO interface, but this is achieved at the systematic expense of a stronger damping. For the best anisotropy-damping compromise, junctions of diameter 22 nm can still be stable and spin-torque switched. Coercivity and inhomogeneous linewidth broadening, likely arising from roughness at the FeCoB/Ta interface, can be reduced if a sacrificial Mg layer is inserted before the Ta spacer deposition.
The CoFeB/MgO/CoFeB magnetic tunnel junction (MTJ) is the central element of any high performance perpendicular Magnetoresistive Random Access Memory (MRAM) device. The MgO tunnel barrier, in contact with CoFeB films at both sides in the magnetic tunnel junction, provides a high tunnel magneto resistance (TMR) and perpendicular magnetic anisotropy (PMA) thanks to the high crystalline quality of the MgO/CoFeB interface achieved upon post-deposition annealing. We study MgGa2O4 as an alternative barrier material due to its lower bandgap and show how to introduce it into state-of-the-art perpendicular MRAM stacks. We demonstrate that thin MgO films at both sides of the barrier are key to ensure a proper crystallization and induce reference layer and free layer perpendicular magnetic anisotropy. Consequently, a stack incorporating a MgGaxOy barrier with full PMA and TMR > 100% can be fabricated with a resistance-area (RA) product as low as 50 Ω μm2, which is of strong interest as a potential barrier in the field of voltage control magnetic anisotropy MRAM.
In this study, a highly texture-driven CoFeB/MgO/CoFeB magnetic tunnel junction (MTJ) system is realized using a textured TiN seed layer on industrial standard silicon wafers. The textured MTJ exhibited a tunnel magnetoresistance of 91%, approximately equivalent to a threefold improvement compared to the semi-amorphous reference. Additionally, influenced by the texture quality of the TiN seed layer and the W buffer layer, the crystallinity of the CoFeB free layer was improved and the W/CoFeB surface was smoothened. Hence, the coercivity of the CoFeB free layer was reduced to 0.25 mT, in comparison to 7.32 mT in the amorphous system. The textured free layer also achieved a lower Gilbert damping constant by 11% and an enhanced perpendicular magnetic anisotropy, with an anisotropy energy density of (7.9 ± 0.1)×105 J/m3 compared to (6.7 ± 0.1)×105 J/m3 for the semi-amorphous reference.