Zhen Peng

Zhen Peng

Auto-generated profile, based on publicly available information

Zhen Peng

School of Mechanical Engineering State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering Sichuan University Chengdu 610065 P. R. China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
WSWanli Song
Wanli Song
ZPZhen Peng
Zhen Peng
PLPeifan Li
Peifan Li
PSPei Shi
Pei Shi
Seung-Bok ChoiSeung-Bok Choi
Seung-Bok Choi
In this study, a novel magnetorheological (MR) polishing device under a compound magnetic field is designed to achieve microlevel polishing of the titanium tubes. The polishing process is realized by combining the rotation motion of the tube and the reciprocating linear motion of the polishing head. Two types of excitation equipment for generating an appropriate compound magnetic field are outlined. A series of experiments are conducted to systematically investigate the effect of compound magnetic field strength, rotation speed, and type and concentration of abrasive particles on the polishing performance delivered by the designed device. The experiments were carried out through controlling variables. Before and after the experiment, the surface roughness in the polished area of the workpiece is measured, and the influence of the independent variable on the polishing effect is judged by a changing rule of surface roughness so as to obtain a better parameter about compound magnetic field strength, concentration of abrasive particles, etc. It is shown from experimental results that diamond abrasive particles are appropriate for fine finishing the internal surface of the titanium-alloy tube. It is also identified that the polishing performance is excellent at high magnetic field strength, fast rotation speed, and high abrasive-particle concentration.

3 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
JZJintao Zhang
Jintao Zhang
WSWanli Song
Wanli Song
ZPZhen Peng
Zhen Peng
JGJinwei Gao
Jinwei Gao
NWNa Wang
Na Wang
GKGi Woo Kim
Gi Woo Kim
This paper presents a new constitutive model of high particles concentrated magnetorheological fluids (MRFs) that is based on the hexagonal close-packed structure, which can reflect the micro-structures of the particles under the magnetic field. Firstly, the particle dynamic simulations for the forces sustained by carbonyl iron powder (CIP) particles of MRFs are performed in order to investigate the particles chain-forming process at different time nodes. Subsequently, according to the force analyses, a hexagonal close-packed structure, which differs from the existing single-chain structure and body-cantered cubic structure, is adopted to formulate a constitutive model of MRFs with high concentration of the magnetic-responsive particles. Several experiments are performed while considering crucial factors that influence on the chain-forming mechanism and, hence, change the field-dependent shear yield stress in order to validate the proposed model. These factors include the magnetic induction intensity, volume fraction and radius of CIP particles, and surfactant coating thickness. It is shown that the proposed modeling approach can predict the field-dependent shear yield stress much better than the single-chain model. In addition, it is identified that the shear yield stress is increased as the particle volume fraction increases and surfactant coating thickness decreases. It is believed that the proposed constitutive model can be effectively used to estimate the field-dependent shear yield stress of MRFs with a high concentration of iron particles.

12 June 2020 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
PDF file
ZPZhen Peng
Zhen Peng
WSWanli Song
Wanli Song
CYCui-Li Ye
Cui-Li Ye
PSPei Shi
Pei Shi
Seung-Bok ChoiSeung-Bok Choi
Seung-Bok Choi
A novel magnetorheological polishing process is devised to polish the internal surface of titanium alloy tubes. Under the magnetic field in polishing area between the internal surface of tube and polishing head, magnetorheological polishing fluid gets stiffened and acts as the polishing tool. In this process, rotation motion of tube and reciprocating linear motion of polishing head are carried out simultaneously resulting in helical motion trajectory of abrasive particles on workpiece surface. The finishing forces during magnetorheological polishing process including normal indentation force and shear force are analyzed and modeled. Based on the proposed model, final surface roughness Ra model is proposed to predict the polishing performance. Experiments are carried out to investigate the effect of polishing time and initial surface roughness Ra on polishing performance. The experimental results are compared with the model results, which are highly consistent. The results show a gradual growth of surface precision with polishing time and an augment of polishing efficiency with increasing initial surface roughness Ra.

27 February 2020 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
WSWanli Song
Wanli Song
ZPZhen Peng
Zhen Peng
SPShuo Pang
Shuo Pang
KSKun Shan
Kun Shan
JGJinwei Gao
Jinwei Gao
Seung-Bok ChoiSeung-Bok Choi
Seung-Bok Choi
This paper proposes a novel constitutive model of magnetorheological polishing fluids (MRPFs) to predict field-dependent properties such as yield shear stress. First, the invasion of polishing particles to carbonyl iron particle (CIP) chains is analyzed in terms of the destructive effect on the distance of particles and the enhancement of chain structures. Subsequently, the hexagonal close-packed structure of magnetorheological fluids (MRFs) is utilized to formulate a constitutive model of MRPFs after examining the reconstructed distance and the proportional property of carbonyl iron particle chains affected by the polishing particles. According to the constitutive model, several factors that may affect the performance of MRPFs are considered, and experiments are carried out to prove these conjectures. A series of experiments explore the influencing mechanism of the radius and volume fraction of the polishing particles on the field-dependent properties of MRPFs such as the yield shear stress. The results, which are highly consistent with the simulation data based on constitutive model, show that the radius and volume fraction of polishing particles significantly affect the field-dependent properties of MRPFs. In addition, at a given magnetic field intensity the optimum radius and volume fraction of the polishing particles can be obtained to enhance the field-dependent yield shear stress of MRPFs.

12 August 2019 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
WSWanli Song
Wanli Song
ZPZhen Peng
Zhen Peng
JZJintao Zhang
Jintao Zhang
JLJintao Li
Jintao Li
NWNa Wang
Na Wang
Seung-Bok ChoiSeung-Bok Choi
Seung-Bok Choi
This study investigates friction and wear properties of rod seals used to prevent leakage of base oil in magnetorheological (MR) dampers. As the first step, a non-piston MR damper (MRD) model is considered for the analysis of both the frictional force and three-body abrasive wear of seals in MRD. Three different seals; O-ring, step ring, and glyd ring seals are adopted for the analysis and experimental tests. In order to conduct the friction and wear testing, a new type of in-house experimental apparatus consisting of an electrical cylinder, pressure sensor and gravity sensor is established. Subsequently, the friction coefficients and wear losses of the seals are evaluated as a function of operation time to validate the feasibility of the derived friction and wear models. To investigate the variation of the seals within MR fluid domain, morphological scanning electron microscopy images such as contacting and worn surfaces are observed and discussed. In addition, the energy-dispersive spectroscopy images are investigated after wearing the seal to observe the changes in size and shape of iron particles which are randomly distributed in MR fluid.

18 October 2023 in Measurement Science and Technology
Verified
Journal Article
Closed access
ZPZhen Peng
Zhen Peng
ZLZongyuan Li
Zongyuan Li
JLJingru Liao
Jingru Liao
ZZZhimi Zhang
Zhimi Zhang
YSYangyang Song
Yangyang Song
Zhuqing WangZhuqing Wang
Zhuqing Wang
A highly electroactive bilayer composite film sensing interface of Prussian blue (PB)/gold nanoparticles-chitosan (AuNPs-CS) was modified on Au electrode through electrochemical deposition and coating method followed by integrating glucose oxidase (GOx) into the interfacial matrix to fabricate a high-performance glucose biosensor. The excellent electrocatalytic ability of the PB/AuNPs-CS composite film sensing interface for H2O2 was evaluated, which has a broad linear response of 0.01–7.95 mM, with a low detection limit (LOD) 0.269 μM and a high sensitivity of 511.82 μA·mM−1·cm−2. The enhanced electrocatalytic activity of this sensing interface for H2O2 is attributed to the protection from the network CS film to PB and the synergistic effect of PB and AuNPs. Consequently, an electrochemical biosensing interface was constructed with GOx immobilized as a model enzyme. The PB/GOx-AuNPs-CS biosensing nanocomposite film was capable of a fast steady-state response time (within 2 s) and high sensitivity to glucose with a wide linear range of: 0.025–2.00 mM (R 2 = 0.99), with a sensitivity of 40.41 μA·mM−1·cm−2 and a LOD of 1.62 μM; and 2.00–6.50 mM (R 2 = 0.98), with a sensitivity of 8.90 μA·mM−1·cm−2 and a LOD of 7.16 μM. The biosensor has good anti-interference and selectivity, which provides a promising wide linear range platform for clinical blood glucose detection in the future.