1 April 2022 in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
Solar energy has become one of the most potential alternative energies in the world. To convert solar energy into electricity, a photovoltaic (PV) system can be utilized. However, the fluctuation of sunlight intensity throughout the day greatly affects the generated energy in the PV system. A battery may be beneficial to store the generated energy for later use. A DC–DC converter is commonly exploited to produce a constant output voltage during the battery charging process. A Zeta converter is a DC–DC converter which can be used to produce output values above or below the input voltage without changing the polarity. To deal with the inherent non-linearity and time-varying properties of the converter, in this paper the sliding mode control (SMC) is first analyzed and exploited before being integrated with a proportional-integral (PI) control to regulate the output voltage of the PV system. Disturbances are given in the form of changes in input voltage, reference voltage, and load. Voltage deviation and recovery time to reach a steady-state condition of the output voltage after disturbances are investigated and compared to the results using a proportional-integral-differential (PID) controller. The results show that the proposed control design performs faster than the compared PID control method.
30 August 2024 in Jurnal EECCIS (Electrics, Electronics, Communications, Controls, Informatics, Systems)
ISI Nyoman Wahyu Satiawan
Rectifiers are becoming more prevalent in a wide range of applications, including power supplies for microelectronics, household electrical devices, battery charging, and power conversion in high-voltage direct current (HVDC) transmission systems. Conventional rectifiers often employ uncontrolled diodes, which have the drawback of generating a fixed output voltage that cannot be modified. There is a requirement for a regulated rectifier, specifically a three-phase PWM Rectifier that transforms AC voltage into DC voltage with an output voltage that surpasses the input voltage and can be modified as per requirements. This study explores the comparison between s-domain and z-domain PI controller designs in the context of controlling a three-phase pulse width modulation (PWM) rectifier. Applying the dual-closed-loop control technique with the pole-zero cancellation approach, we can calculate the PI parameters for controlling the current and voltage in the circuit. The values of the parameters are as follows: K_pc = 4, K_ic = 100, K_pv = 0.097, and K_iv = 4.85. Applying the forward Euler method to transform the PI controller from the s domain to the z domain. The test results for the PWM Rectifier PI controller were conducted in both the s-domain and z-domain. As per the setpoint, a three-phase voltage source with a value of 220 Volts was used, resulting in a stable DC voltage output of 600 Volts.
1 June 2026 in International Journal of Applied Power Engineering (IJAPE)
Small-scale wind turbines (SSWT) encounter a primary issue in power extraction, making the integration of DC-DC converters with maximum power point tracking (MPPT) crucial for performance enhancement. This study focuses on an evaluation of basic DC-DC converters, which offer many benefits when applied to SSWT systems. By considering efficiency, suitability, and electrical stress aspects, six DC-DC converter topologies consisting of boost, buck-boost, SEPIC, Cuk, zeta, and Luo, were tested under perturb and observe (P&O) and incremental conductance (INC) MPPT strategies. A 6.5-kW SSWT system, including a DC-DC converter and MPPT was designed in detail using PSIM. The results show that boost converter demonstrated the best overall performance in terms of power extraction, efficiency, and stress reduction, although its operation was limited to a narrower wind speed range. The zeta converter achieved efficiency and power extraction comparable to the boost converter with stable operation over a broader wind speed range, while the buck–boost converter offered step-up/step-down capability but experienced higher voltage and current stress. The SEPIC and Cuk converters showed low overall performance compared to others, whereas the Luo converter was better suited for low-wind-speed conditions.