7 April 2025 in IEEE Transactions on Dielectrics and Electrical Insulation
In order to solve the problem of poor prediction of dissolved gas concentration in transformer oil under a defective state caused by a “small-sample” problem, a prediction method for dissolved gas in power transformer oil based on transfer learning and mutation detection is proposed. First, the domain adversarial-transfer learning method is used to train the prediction models under normal and defective states, respectively. A large number of normal state samples are used to assist in training to solve the problem of inaccurate prediction caused by the “small-sample” characteristics of the defective state. Then, taking the prediction error as the criterion, a transformer state mutation detection method is proposed to determine the transformer state for selecting the required model during online prediction. Finally, the online monitoring data of dissolved gas concentration in transformer oil collected on site is used for testing. The results showed that the proposed method can adapt to the prediction tasks under normal and defective states at the same time. Compared with the comparison method, MAPE is reduced by more than 6.504%, and RMSE is reduced by more than $73.295~\mu $ L/L.
29 October 2026 in Polymer Engineering & Science
12 February 2026 in IEEE Transactions on Plasma Science
Gas-insulated switchgear (GIS) is a key piece of equipment in ultrahigh-voltage (UHV) substations. As its core component, the performance of the insulation rod directly determines the operational reliability of the equipment. Aramid fiber-reinforced epoxy resin composite (AFEP) material, due to its excellent insulation and mechanical properties, has become an ideal material for insulation rods. However, aramid fibers have low surface activity and poor interfacial bonding with epoxy resin, which can easily induce partial discharges. Therefore, this article proposes a dielectric barrier discharge (DBD) plasma element deposition modification scheme. Using CF4 as a precursor, aramid fibers were modified through the physical etching and chemical grafting effects of plasma. The influence patterns and regulation mechanisms of plasma fluorine element deposition on the interfacial bonding characteristics and insulation properties of AFEP were studied. The results show that plasma can graft fluorine-containing groups onto the surface of aramid fibers, forming a fluorinated layer. This enhances the interfacial bonding strength through chemical bonding and physical anchoring effects, with the interlaminar shear strength (ILSS) increasing by up to 45.19%. Meanwhile, fluorination is beneficial for increasing trap energy levels and significantly improving the breakdown field strength, with a maximum increase of 71.1%. Combined with molecular dynamics simulations, the mechanism by which fluorine element deposition affects insulation properties was revealed.
9 February 2026 in SSRN Electronic Journal
Dielectric thin-film capacitors are core components of advanced electrical systems, but the degradation of their energy storage characteristics at high temperatures severely limits their applications. This paper innovatively proposes a method for synergistic control of charge trapping and micropolarization across a wide temperature range through a layer-by-layer self-assembly structure, and prepares a composite dielectric thin film with excellent high-temperature energy storage characteristics based on polyimide (PI). On the one hand, epoxy resin (DGEBA) acts as an organic assembly layer, and the interface phase formed by chemical bonding with PI transforms the trap energy levels, creating a charge trapping barrier to block breakdown paths, thus ensuring the maximization of material polarization. On the other hand, surface-modified strontium barium titanate (BST)@SiO2 core-shell particles, as the inorganic assembly layer, form stable secondary amine bonds with epoxy molecules through amino groups, constructing a gradient dielectric hierarchical structure to achieve micropolarization control of local charges and improve the overall polarization capability of the material. In addition, the epoxy resin cured with 1-methylimidazole forms a rigid polyether network with high crosslinking density with PI, effectively ensuring the excellent energy storage performance of the material at high temperatures. After optimizing and controlling the number of assembly layers, the PI composite dielectric film (with two assembled layers) maintains a high discharge energy efficiency at 200°C, with an energy storage density and discharge energy density of 10.98 J·cm⁻³ and 6.39 J·cm⁻³, respectively.
1 January 2026 in IEEE Transactions on Dielectrics and Electrical Insulation
1 January 2026 in IEEE Transactions on Dielectrics and Electrical Insulation