Søren Wandahl

Søren Wandahl

Auto-generated profile, based on publicly available information

Søren Wandahl

Department of Civil and Architectural Engineering, Aarhus University, Inge Lehmanns Gade 10, 8000 Aarhus, Denmark

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2024 in Journal of Information Technology in Construction
Verified
Journal Article
Open access
PDF file
EJEmil L. Jacobsen
Emil L. Jacobsen
JTJochen Teizer
Jochen Teizer
SWSøren Wandahl
Søren Wandahl
IBIoannis Brilakis
Ioannis Brilakis
This study investigates the possibility of doing probabilistic forecasting of construction labor productivity metrics for both long-term and short-term estimates. The research aims to evaluate autoregressive forecasting models, which may help decision-makers with information currently unavailable in construction projects. Unlike point forecasts, the proposed method employs probabilistic forecasting, offering additional valuable insights for decision-makers. The distributional information is obtained by updating the moments of the distribution during training. Two datasets are used to evaluate the models: one collected from an entire construction site for long-term forecasting and one from an individual worker for short-term forecasting. The models aim to predict the state of direct work, indirect work, and waste. Several models are trained using different hyperparameters. The models are tuned on the number of trees and the regularization used. The presented method gives estimates of future levels of direct work, indirect work, and waste, which will add value to future processes.

20 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
CPCristina Toca Pérez
Cristina Toca Pérez
SSStephanie Salling
Stephanie Salling
SWSøren Wandahl
Søren Wandahl
This study is part of an ongoing research project aiming to develop a method for understanding workers’ efficiency (workers’ time spent in value-adding activities) by measuring new indexes, such as workers’ travelled distances and workers’ locations collected by smartwatches. To achieve the objective of the study, a Design Science Research (DSR) strategy was adopted. The first cycle consists of understanding which types of information smartwatches can collect and how this data can be employed for measuring workers’ efficiency. This paper reports a case study as part of the first Cycle of the DSR. The object studied were the activities carried out by a carpenter trade in a housing renovation project. The authors used the geographic coordinates obtained by smartwatches worn by the carpenter trade connected to two Global Navigations Satellite Systems. The primary contribution of this research consists of proposing a set of five guidelines for the application of smartwatches, using data gathered from the case study. The guidelines are: (1) adopt a stratified sampling approach for selecting the workers involved according to their tasks conducted; (2) set up the smartwatches considering workers’ physical features; (3) carefully consider the job site location for delivering the smartwatch to workers; (4) establish assumptions for the data cleaning process regarding construction project features and the study’s goal; and (5) use individual participant data in the analysis according to each participant’s characteristics and role.

19 June 2025 in CIB Conferences
Verified
Journal Article
Open access
PDF file
MAMohamad Iyad Al-Khiami
Mohamad Iyad Al-Khiami
Søren Munch LindhardSøren Munch Lindhard
Søren Munch Lindhard
SWSøren Wandahl
Søren Wandahl
Work-related musculoskeletal disorders (WMSDs) are among the most frequently reported injuries among industrial workers, primarily due to prolonged exposure to awkward postures. While ergonomists emphasize process and equipment redesign, exoskeletons offer a promising supplementary solution for improving workplace ergonomics. However, the effectiveness of different exoskeleton designs remains understudied. This study employs an experimental approach to evaluate the impact of two passive exoskeletons—(A) HAPO SD and (B) BISKO—on posture and task performance during repetitive lifting activities. Postural assessment was conducted using an AI-driven software that analyzes posture based on the Rapid Upper Limb Assessment (RULA) method. The findings indicate that both exoskeletons influenced posture and performance, albeit with varying effectiveness. Exo A demonstrated more consistent benefits by shifting postures toward moderate-risk categories (RULA scores of 3 to 4) while enabling participants to complete more repetitions and sustain longer task durations compared to both the no-exoskeleton condition and the BISKO exoskeleton. However, statistical analyses did not confirm significant differences in posture improvements between exoskeleton and no-exoskeleton conditions, underscoring the importance of ergonomic training and safe lifting techniques as primary interventions. These findings contribute to the growing body of research on exoskeleton applications in workplace ergonomics, emphasizing the need for careful exoskeleton selection to optimize worker augmentation and mitigate fatigue.

1 May 2023 in Journal of Engineering, Project, and Production Management
Verified
Journal Article
Open access
PDF file
SWS. Wandahl
S. Wandahl
CPCristina Toca Pérez
Cristina Toca Pérez
SSStephanie Salling
Stephanie Salling
HNH. H. Neve
H. H. Neve
The Work Sampling (WS) technique, used worldwide to understand how workers spend their time, represents a time-consuming and costly activity. Therefore, several researchers work on different approaches to automate the data collection using sensor-based and vision-based technologies. The challenge of all the sensor-based approaches is that they do not provide the share of time in different work categories. The lack of knowledge on a possible correlation between Direct Work and, e.g., presence, location, or worker movement represents a gap in the current body of knowledge. Thus, this research aims to understand the correlation between Direct Work as the independent predictor variable; and Movement as the dependent response variable. The authors used the data gathered through the application of WS in five case studies on building renovation projects in Denmark. To explain this correlation. The authors selected a combination of four quantitative techniques: (1) curve estimation; (2) linear regression; (3) ANOVA analysis; and (4) t-test. The correlation of the result is discussed considering three assumptions: (1) the structure of the day; (2) global vs. local; and (3) Movement vs. Transporting and Walking. The result shows a significant correlation between Direct Work and Movement with an average R 2 of 0.328. This is considered acceptable predictability taking the socio-technical system aspect of a construction site into account.

14 March 2024
Verified
Book Chapter
Open access
PDF file
JMJhonattan G. Martinez
Jhonattan G. Martinez
LUIS ALARCONLUIS ALARCON
LUIS ALARCON
SWSøren Wandahl
Søren Wandahl
The advent of Construction 4.0 has marked a paradigm shift in industrial development, integrating advanced technologies such as cyber-physical systems (CPS), sensors, unmanned aerial systems (UAS), building information modeling (BIM), and robotics. Notably, UASs have emerged as invaluable tools seamlessly embedded in construction processes, facilitating the comprehensive monitoring and digitization of construction projects from the early design phase through construction to the post-construction phases. Equipped with various sensors, such as imaging sensors, light detection and rangers (LiDAR), and thermal sensors, UASs play an important role in data collection processes, especially for 3D point cloud generation. Presently, UASs are recognized as one of the most effective means of generating a Digital Twin (DT) of construction projects, surpassing traditional methods in terms of speed and accuracy. This chapter provides a comprehensive overview of the applications of UAS-derived 3D models in DT, outlining their advantages and barriers and offering recommendations to augment their quality and accuracy.

1 July 2024
Verified
Conference Paper
Open access
PDF file
CPCristina Toca Pérez
Cristina Toca Pérez
MMMalik Madushanka
Malik Madushanka
LLLorenzo Loyola
Lorenzo Loyola
MEMelisa Ergul
Melisa Ergul
SSStephanie Salling
Stephanie Salling
SWSøren Wandahl
Søren Wandahl
This study is part of an ongoing research project that aims to understand workers' job satisfaction in the construction industry. For that, a survey was applied among construction workers in Denmark. This paper aims to identify the impact of Lean Construction on job satisfaction. Data from 2176 responses were analysed using framework analysis, shorting the answers into three categories: Lean knowledge; Lean application; and Lean operation, even though they declared not knowing Lean. The study investigated the impact of the different levels of Lean familiarity on job satisfaction within five aspects: Project progress; Management-employee relationship; Employee work monitoring; Workload; and Workflow. Findings indicate that only 15% of respondents have some knowledge of Lean concepts, with only 8% confirming its application. The strongest correlation (R 2 =0.557) was found between the Lean practice of "organization attempt to keep workers informed" and the job satisfaction factor of "manager-worker relationship". Allowing the workers to evolve and improve presented, also, a strong correlation with job satisfaction. The study highlights that Lean practices that lead or require Respect for People are the aspects that impact the most on job satisfaction. The results emphasize that implementing Lean principles effectively matters more than merely being familiar with them.