5 October 2022 in Modelling and Simulation in Engineering
Most optical sensors on the market are optical fiber Bragg grating (FBG) sensors with low reflectivity (typically 7-40%) and low side-lobe suppression (SLS) ratio (typically SLS <15 dB), which prevents these sensors from being effectively used for long-distance remote monitoring and sensor network solutions. This research is based on designing the optimal grating structure of FBG sensors and estimating their optimal apodization parameters necessary for sensor networks and long-distance monitoring solutions. Gaussian, sine, and raised sine apodizations are studied to achieve the main requirements, which are maximally high reflectivity (at least 90%) and side-lobe suppression (at least 20 dB), as well as maximally narrow bandwidth (FWHM<0.2 nm) and FBGs with uniform (without apodization). Results gathered in this research propose high-efficiency FBG grating apodizations, which can be further physically realized for optical sensor networks and long-distance (at least 40 km) monitoring solutions.
1 December 2021 in Optical Fiber Technology
1 August 2016 in Latvian Journal of Physics and Technical Sciences
Considering the growing demand for broadband of access networks, in the present paper we investigate various modulation formats as a way of increasing the performance of optical transmission systems. Non-return-to-zero (NRZ) on-off keying, return-to-zero (RZ) OOK, carrier suppressed RZ (CSRZ) OOK, duobinary (DB), NRZ differential phase shift keying (NRZDPSK), RZ-DPSK and CSRZ-DPSK formats are compared using the maximal achievable reach with bit error rate less than 10−9 as a criterion. Simulations are performed by using OptSim software tool. It is shown that using the transmission system without dispersion compensation the best results are shown by duobinary and CSRZ-OOK modulation formats, but with the system using dispersion compensating fiber (DCF) the longest transmission distance is achieved by RZ-DPSK modulation format. By investigating the influence of channel spacing for best-performed modulation formats, network reach decrease for transmission systems with DCF fiber has been observed due to channel crosstalk