The main factor that drives the aging of power semiconductor modules is the thermally induced stress caused by the maximum temperature and temperature swings. This thermally induced stress is usually counteracted in passive designs with oversizing of components, which brings additional cost to the system. This is a major limitation of future power electronic systems that are required to be more reliable with reasonable cost and for many applications to be lighter and smaller. Active thermal control (ATC) is a possibility to reduce the thermal stress of components during real-time operation without the need to modify the expensive converter power stage. Many studies have shown the potential of ATC to not only extend the lifetime of power converters because of the reduced stress, but also to increase the converter devices utilization by pushing them into their thermal limits with proper control. This makes ATC an appealing way to realize the contradicting reliability, cost, and power density requirements. This paper provides an overview of the benefits and objectives, structure, and implementation possibilities of ATC. It also provides and overview of the limitations and disadvantages of many ATC strategies. Based on this discussion, it highlights key issues that must be addressed by future research. Among them is minimizing the impact of different ATC strategies on the power losses, operational cost, and output voltage and current quality.
6 December 2024 in e-Prime - Advances in Electrical Engineering, Electronics and Energy
The cascaded H-bridge (CHB) is an attractive converter topology because it can provide voltage and power scalability. However, due to the difference in electrical and thermal characteristics of power devices, the CHB can be composed of cells with unequal remaining useful lifetime (RUL). In this paper, a PWM strategy is proposed to manage the lifetime of individual cells within a single-phase CHB by controlling the thermal stress of power devices. The proposed PWM has two variants of modulation signals. The discontinuous modulation (DM) which reduces the thermal stress of a cell and the compensating modulation (CM) for removing the offset voltage introduced by DM. Based on the accumulated damages of cells, the modulation signals are actively updated to achieve equalized RUL. The benefit of the proposed PWM is that the power transmission of cells is not affected by the clamping region of the DM. This is achieved by introducing a factor C during the unclamped region which reduce the fundamental voltage by the same amount the clamping region causes it to increase. The experimental result verifies the impact of the proposed PWM on the power transmission of cells. Furthermore, a long-term study is provided in simulation to validate the lifetime equalization of cells.