Due to the wider use of nanocellulose in various areas of economic life, better and more optimal methods of obtaining nanocellulose are constantly being sought. Therefore, an attempt was made to evaluate the hybrid cellulose treatment, based on the use of a chemical method combined with an ultrasound of medium frequency. The study employs two different starting materials (Södra Black R cellulose or microcrystalline cellulose), two types of chemical pre-treatments (acid hydrolysis or oxidation), and two sonication durations. It was found that the reduction fiber cross-sectional dimensions was the result of prolonged exposure of cellulose to the ultrasound. From Södra Black R and the microcrystalline cellulose nanometer scale, structures were obtained in the form of isolated fibers. The TEMPO reagent accelerated the degradation process of two cellulose varieties due to its oxidizing character. The resulting products had nanofibrous structures. Cellulose degradation as a result of the combined action of sonication and TEMPO activity progressed gradually. Places of fiber degradation were characterized by their longitudinal breakage and initiated the next stages of the defibering process.
Nanocellulose has gained increasing attention during the past decade, which is related to its unique properties and wide application. In this paper, nanocellulose samples were produced via hydrolysis with ionic liquids (1-ethyl-3-methylimidazole acetate (EmimOAc) and 1-allyl-3-methylimidazolium chloride (AmimCl)) from microcrystalline celluloses (Avicel and Whatman) subjected to enzymatic pretreatment. The obtained material was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM), and thermogravimetric analysis (TG). The results showed that the nanocellulose had a regular and spherical structure with diameters of 30–40 nm and exhibited lower crystallinity and thermal stability than the material obtained after hydrolysis with Trichoderma reesei enzymes. However, the enzyme-pretreated Avicel had a particle size of about 200 nm and a cellulose II structure. A two-step process involving enzyme pretreatment and hydrolysis with ionic liquids resulted in the production of nanocellulose. Moreover, the particle size of nanocellulose and its structure depend on the ionic liquid used.
Starch is an inexpensive, easily accessible, and widespread natural polymer. Due to its properties and availability, this polysaccharide is an attractive precursor for sustainable products. Considering its exploitation in adhesives and coatings, the major drawback of starch is its high affinity towards water. This study aims to explain the influence of the silane-starch coating on the hydrophobic properties of paper. The analysis of the organosilicon modified starch properties showed an enhanced hydrophobic behavior, suggesting higher durability for the coatings. Molecules of silanes with short aliphatic carbon chains were easily embedded in the starch structure. Longer side chains of silanes were primarily localized on the surface of the starch structure. The best hydrophobic properties were obtained for the paper coated with the composition based on starch and methyltrimethoxysilane. This coating also improved the bursting resistance and compressive strength of the tested paper. A static contact angle higher than 115° was achieved. PDA analysis confirmed the examined material exhibited high barrier properties towards water. The results extend the knowledge of the interaction of silane compositions in the presence of starch.
The objective of the study was to create artificial neural networks (ANN) capable of highly efficient recognition of modified and unmodified puffed pork snacks for the purposes of obtaining an optimal final product. The study involved meat snacks produced from unmodified and papain modified raw pork (Psoas major) by means of microwave-vacuum puffing (MVP) under specified conditions. The snacks were then analyzed using various instruments in order to determine their basic chemical composition, color and texture. As a result of the MVP process, the moisture-to-protein ratio (MPR) was reduced to 0.11. A darker color and reduction in hardness of approx. 25% was observed in the enzymatically modified products. Multi-layer perceptron networks (MLPN) were then developed using color and texture descriptor training sets (machine learning), which is undoubtedly an innovative solution in this area.