17 May 2023 in Microsystems & Nanoengineering
Acoustic sensors with ultrahigh sensitivity, broadband response, and high resolution are essential for high-precision nondestructive weak signal detection technology. In this paper, based on the size effect of an ultrahigh-quality (Q) calcium fluoride (CaF2) resonator, a weak acoustic signal is detected by the dispersive response regime in which an acoustic, elastic wave modulates the geometry and is converted to a resonance frequency shift. Through the structural design of the resonator, the sensitivity reaches 11.54 V/Pa at 10 kHz in the experiment. To our knowledge, the result is higher than that of other optical resonator acoustic sensors. We further detected a weak signal as low as 9.4 µPa/Hz1/2, which greatly improved the detection resolution. With a good directionality of 36.4 dB and a broadband frequency response range of 20 Hz–20 kHz, the CaF2 resonator acoustic sensing system can not only acquire and reconstruct speech signals over a long distance but also accurately identify and separate multiple voices in noisy environments. This system shows high performance in weak sound detection, sound source localization, sleep monitoring, and many other voice interaction applications.
31 January 2024 in ACS Photonics
12 March 2024 in IEEE Sensors Journal
Whispering-gallery mode (WGM) optical resonators with ultra-high optical quality factor (Q) and small mode volume (V) are one of the most promising platforms for magnetic sensing. However, the low conversion efficiency between the magnetic signal and the optical resonator makes it difficult to break through the pico-Tesla (pT) level of sensitivity, limiting its performance in applications. Here, we propose an ultra-high Q calcium fluoride (CaF 2 ) WGM resonator with an asymmetric wedge structure for magnetic sensing. Theoretically, the structural parameters of the asymmetric wedge significantly regulate the deformation of the resonator under magnetic induction. Interestingly, certain structural parameters correspond to zero deformation. Based on this phenomenon, an optimized sensitivity of 0.93 pT/Hz 1/2 at 654.2 kHz is obtained utilizing the resonator with Q of 8.6×10 8 . Moreover, the system demonstrated a highly sensitive response from 10 kHz to 1 MHz. The CaF 2 resonator magnetic sensor based on asymmetric wedge structure will play an important role in areas such as magnetic anomaly detection and mineral exploration.
10 January 2025 in Journal of Lightwave Technology
The optical resonators with ultrahigh quality (Q) factor are advantageous as highly sensitive sensors, benefiting from the sharp characteristics of their resonance peaks. However, this high sensitivity is usually achieved at the expense of linear range, so the sensing dynamic range is physically limited. In this paper, we propose a nonlinear modulation method based on the generation of an interference phenomenon between two scattering amplitudes. The recursive property of the Bessel function is utilized to construct expressions for the combination of harmonic components in order to improve the dynamic range of microcavity sensing. By utilizing the interference mechanism between discrete and continuous states, we obtain a Fano line shape with a higher slope. Using modulation and demodulation techniques, we achieve a magnetic sensing sensitivity of $20.5\,\text{pT}/ \text{Hz}^{1/ 2}$. Meanwhile, by solving for the higher-order Bessel higher harmonics of the Fano resonance, a linear range of 1.06 μT is achieved, and the final dynamic range is improved by 8.4 dB. The proposed method is expected to become a generic solution for overcoming the limited dynamic range of microcavity sensors.
1 May 2025 in Photonics Research
Whispering gallery mode (WGM) resonators have been widely researched for their high-sensitivity sensing capability, but there is currently a lack of high-sensitivity real-time sensing methods for quasi-static measurement. In this paper, within the framework of dissipative coupling sensing, a new method for quasi-static sensing based on the self-modulation of lithium niobate (LiNbO3) resonators is proposed. The LiNbO3 resonator actively modulates the signal to be measured, solving the challenge of real-time demodulation of quasi-static signals. The noise background is upconverted to a high frequency region with lower noise, further enhancing the detection limit. In the demonstration of quasi-static displacement sensing, a customized LiNbO3 resonator with a Q-factor of 2.09×107 serves as the high frequency modulation and sensing element, while the movable resonator acts as the displacement loading unit. Experimental and theoretical results show that the sensing response can be improved to 0.0416 V/nm by dissipation engineering to enhance the resonator evanescent field decay rate and orthogonal polarization optimization. The Allan deviation σ demonstrates a bias instability of 0.205 nm, which represents the best result known to date for microresonator displacement sensing in the quasi-static range. Our proposed scheme demonstrates competitiveness in high-precision quasi-static sensing and provides solutions for the high-precision real-time detection of low frequency or very low frequency acceleration, pressure, nanoparticles, or viruses.
10 June 2025 in Journal of Lightwave Technology
In recent years, whispering gallery mode optical resonators have demonstrated high sensitivity in sensing measurements. However, the inherent 1/f noise and thermal noise limit the sensitivity in the low frequency range, which restricts the development of the sensing range to lower frequency and affects the applications in the fields of seismic monitoring and energy exploration. Here, we propose a mechanical modulation frequency up-conversion method for low frequency acceleration sensing by driving the resonator at a mechanical resonance frequency for external modulation, up-converting the low frequency acceleration signals to the noise flat region. Theoretically, by the high quality factor and mechanical resonance properties of the resonator, the signal is modulated to the sidebands on both sides of the resonance, and the opto-mechanical dual resonance enhancement effect is utilized to significantly amplify the response of the resonator optical field to external acceleration, and the low frequency sensitivity is enhanced by simultaneous demodulation. The results show a sensitivity of 3970 V/g at 1 Hz, which improve the noise equivalent acceleration at low frequency by two orders of magnitude from 200 ng/Hz1/2 to 2 ng/Hz1/2 (g = 9.81 m/s2) compared to the frequency locking method. This method provides a solution for high precision optical sensing, which is limited by low frequency noise, thereby broadening the potential application field.