10 January 2025 in Journal of Lightwave Technology
The optical resonators with ultrahigh quality (Q) factor are advantageous as highly sensitive sensors, benefiting from the sharp characteristics of their resonance peaks. However, this high sensitivity is usually achieved at the expense of linear range, so the sensing dynamic range is physically limited. In this paper, we propose a nonlinear modulation method based on the generation of an interference phenomenon between two scattering amplitudes. The recursive property of the Bessel function is utilized to construct expressions for the combination of harmonic components in order to improve the dynamic range of microcavity sensing. By utilizing the interference mechanism between discrete and continuous states, we obtain a Fano line shape with a higher slope. Using modulation and demodulation techniques, we achieve a magnetic sensing sensitivity of $20.5\,\text{pT}/ \text{Hz}^{1/ 2}$. Meanwhile, by solving for the higher-order Bessel higher harmonics of the Fano resonance, a linear range of 1.06 μT is achieved, and the final dynamic range is improved by 8.4 dB. The proposed method is expected to become a generic solution for overcoming the limited dynamic range of microcavity sensors.
10 June 2025 in Journal of Lightwave Technology
In recent years, whispering gallery mode optical resonators have demonstrated high sensitivity in sensing measurements. However, the inherent 1/f noise and thermal noise limit the sensitivity in the low frequency range, which restricts the development of the sensing range to lower frequency and affects the applications in the fields of seismic monitoring and energy exploration. Here, we propose a mechanical modulation frequency up-conversion method for low frequency acceleration sensing by driving the resonator at a mechanical resonance frequency for external modulation, up-converting the low frequency acceleration signals to the noise flat region. Theoretically, by the high quality factor and mechanical resonance properties of the resonator, the signal is modulated to the sidebands on both sides of the resonance, and the opto-mechanical dual resonance enhancement effect is utilized to significantly amplify the response of the resonator optical field to external acceleration, and the low frequency sensitivity is enhanced by simultaneous demodulation. The results show a sensitivity of 3970 V/g at 1 Hz, which improve the noise equivalent acceleration at low frequency by two orders of magnitude from 200 ng/Hz1/2 to 2 ng/Hz1/2 (g = 9.81 m/s2) compared to the frequency locking method. This method provides a solution for high precision optical sensing, which is limited by low frequency noise, thereby broadening the potential application field.
2 September 2025 in Journal of Lightwave Technology
Magnetic communication offers stable signal propagation in non-line-of-sight, underwater, and cross-medium environments. Optical whispering gallery mode (WGM) resonators, known for their ultrahigh quality factors and sensitivity to weak perturbations, inherently support multiple mechanical modes and can be used for multi-channel parallel magnetic communication. However, the mechanical resonance modes are sparsely distributed and exhibit inconsistent response strengths, which limits the number and reliability of available communication channels. Therefore, we introduce a magneto- elastic heterostructured resonator integrating Terfenol-D to enhance magnetoelastic coupling, which significantly augments the density of frequency domain communication channels with nearly uniform response. Experimental results demonstrate the use of 10 parallel mechanical subcarriers to achieve a total data rate of 12.5 kbps—an order-of-magnitude improvement over single channel designs—with potential for further scalability. By employing multimodal resonance multiplexing with a microcavity-based sensor, our work establishes a new paradigm for high-capacity, short-range magnetic communication in complex environments