16 September 2023 in Additive Manufacturing
23 April 2024 in International Journal of Heat and Mass Transfer
12 January 2024 in Journal of Engineering for Gas Turbines and Power
Code_Saturne, an open-source computational fluid dynamics (CFD) code, has been applied to a range of problems related to turbomachinery internal air systems. These include a closed rotor–stator disk cavity, a co-rotating disk cavity with radial outflow and a co-rotating disk cavity with axial throughflow. Unsteady Reynolds-averaged Navier–Stokes (RANS) simulations and large eddy simulations (LES) are compared with experimental data and previous direct numerical simulation and LES results. The results demonstrate Code_Saturne's capabilities for predicting flow and heat transfer inside rotating disk cavities. The Boussinesq approximation was implemented for modeling centrifugally buoyant flow and heat transfer in the rotating cavity with axial throughflow. This is validated using recent experimental data and CFD results. Good agreement is found between LES and RANS modeling in some cases, but for the axial throughflow cases, advantages of LES compared to URANS are significant for a high Reynolds number condition. The wall-modeled large eddy simulation (WMLES) method is recommended for balancing computational accuracy and cost in engineering applications.
1 October 2023 in Physics of Fluids
To further explore the development of turbine secondary flows and associated losses at a low Reynolds number, a synergy analysis was developed and implemented. Loss is defined in terms of entropy generation in the present study. Inspired by the field synergy principle in convective heat transfer, the synergy between velocity and pressure gradient was derived from the three-dimensional mechanical energy conservation in a rotating frame. The loss of mechanical energy is not only related to the viscous dissipation but also the included angle (i.e., the synergy angle) between the velocity vector and the pressure gradient vector. A larger synergy angle (i.e., a worse synergy) is found to result in a higher loss for a fixed flow rate and pressure difference. This has been verified by both time-averaged and time-resolved numerical results. It is demonstrated that a worse synergy could be observed in high-loss regions, such as the turbine end wall, the suction-side separation and the wake. The velocity vector is not aligned with the pressure gradient vector in the vicinity of the reverse flow or the adverse pressure gradient, and the synergy angle could be employed as an indicator of these flow deteriorations. It is hoped the synergy could offer the potential method of future turbomachinery aerodynamic optimizations.
1 March 2022 in Materials Letters
27 February 2023 in Journal of Engineering for Gas Turbines and Power
Rim seal structures and sealing flows are essential in aero engines for preventing hot gas ingestion from mainstream to turbine disk cavities. A novel design method of rim sealing flow path based on auxiliary sealing holes and sealing air re-distributions has been proved to improve sealing effectiveness. The present paper uses this method to re-design the axial rim sealing flow in a high-pressure turbine front cavity in an engine turbine. The incidence angle of the auxiliary sealing air has been proved to have a significant influence on sealing performance. Three different incidence angles, 0-deg, 35-deg, and 70-deg, with the maximum angle close to the vane exit flow angle, are investigated using unsteady computational fluid dynamics methods validated by experimental data. Sealing effectiveness, swirl ratio, unsteady flow structures in both rim clearance and wheel space cavity are considered. The auxiliary sealing air with a swirl in the circumferential direction is proved to improve and uniform swirl ratio and suppress flow instabilities. This results in a reduction in hot gas ingestion and a considerable improvement in sealing effectiveness. The mechanisms of improving sealing effectiveness using this novel method are explained. The conclusions may support the understanding of the complex flow mechanisms near the rim seal, provide references for the design of this novel structure and give possibilities to improve rim seal performance and engine efficiency.