Image sensor has developed for decades. Now, submicron photo sensor device with high performance is required. In this work, a UTBB (ultra-thin body and box) based single transistor image sensor has been investigated. The light collection and signal readout are accomplished by a single transistor, so the pixel of the UTBB image sensor can shrink down to the submicron. The main parameters impacting the performance of the UTBB image sensor such as back voltage, the thickness of the BOX?well doping concentration and well depth are investigated. Besides, the UTBB image sensor can achieve multi-resolution to adapt to different requirements. The performance of the UTBB image sensor is evaluated by TCAD simulations.
29 December 2022 in IEEE Transactions on Electron Devices
A frame differencing pixel (FDP) design based on fully depleted silicon-on-insulator (FD-SOI) technology is presented, demonstrating the capability of the FDP to perform pixel-level real-time frame difference (FD) for motion extraction and image preprocessing. The photo charges are collected by the diode under the buried oxide (BOX) and sensed by the MOSFET above. The capacitance of the BOX is used to generate the FD signal without incurring more area costs. TCAD simulations of the FD-SOI FDP were performed to help the analysis. An optimal pixel design model was developed to describe the relationship between noise performance and area allocation. According to the simulation results, the FDP could achieve light sensitivity of $25.6 ~\mu \text{A}$ /( $\mu \text{J}$ /cm2) and a differential signal-to-noise ratio of 35 dB with a $4 ~\mu \text{m}$ pixel pitch and 76% fill factor.
19 March 2020 in IEEE Transactions on Electron Devices
This article presents an evaluation of the photoelectric characteristic of different structured ultrathin body and buried oxide (UTBB) MOSFETs. The UTBB MOSFETs can achieve photoelectric conversion by integrating a doped well or photodiode beneath the BOX. With lightly doped well, the well-UTBB (W-UTBB) image sensor is more sensitive to illumination. On the other hand, the photodiode-UTBB (PD-UTBB) image sensor has a larger full well capacity. The influence of well doped concentration and interface traps at BOX/well on the photoelectric characteristics of both devices has been investigated. The well doped concentration has great impacts on the light sensitivity of the W-UTBB. The interface traps would increase the dark current of the W-UTBB and reduce the internal quantum efficiency (IQE) of the PD-UTBB.