Sodium‐ion batteries offer a promising alternative to lithium‐ion batteries by addressing ecological and economic challenges. However, to assess the applicability of these cells for different sectors, understanding aging behavior, including degradation modes, is crucial. This work presents a comprehensive aging analysis of 67 commercial sodium‐ion batteries under various temperatures, C‐rates, and depths of discharge. We analyzed the initial cell‐to‐cell variance and the aging trajectories regarding capacity fade and resistance increase. We demonstrated that the cycling rate does not significantly influence the aging trajectories, whereas smaller depths of discharge significantly reduce degradation. The degradation gradients for 25 °C and 40 °C were similar; for −10 °C, we observed rapid capacity fading that can be attributed to irreversible sodium plating. Furthermore, we identified the degradation modes for four different aging categories. Since some aging tests stopped due to gas‐induced current interrupt device triggering at low current rates and states of charge, we proposed two hypotheses for the gassing under specific conditions, suggesting inadequate gas consumption in cathode‐electrolyte side reactions or solid electrolyte interphase instability as potential causes. Overall, this work provides a valuable in‐depth analysis of the aging behavior of a commercial sodium‐ion battery as a function of temperature, C‐rate, and depth of discharge, with data made available for further research.
The mounting demand for battery cells in the context of the energy transition necessitates evaluation methodologies that extend beyond mere performance metrics. This work presents a multidimensional framework that simultaneously integrates electrical performance, economic costs, and life cycle assessment into a consistent analysis of real and virtual cells. In total 140 cells were modeled, covering commercial chemistries and systematically permuted configurations. The framework enables systematic comparisons of real commercial cells and virtual redesigns by varying cell parameters under consistent boundary conditions without unintended side effects. Ultra high energy cells were generated, achieving very high energy densities under idealized design assumptions. Lithium‐iron‐phosphate (LFP) battery cells exhibit global warming potential values of , while sodium‐ion batteries (SiB) show a slightly higher range of . Depending on housing and anode composition, production costs range from – for LFP and – for SiB. SiB cells achieve mineral resource scarcity values of about , three times lower than lithium‐ion batteries. Cathode chemistry proves decisive for ecological performance, with nickel sulfate‐based precursors showing the highest acidification values and LFP cells showing the lowest. Housing design plays an important role: pouch formats minimize costs and emissions. Systematic permutations show that increasing energy density is a key lever to lower environmental burdens.