Aniruddh Shekhawat

Aniruddh Shekhawat

Auto-generated profile, based on publicly available information

Aniruddh Shekhawat

Department of Mechanical and Aerospace Engineering, University of Florida 2 , Gainesville, Florida 32611, USA

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 May 2018 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
GWGlen Walters
Glen Walters
ASAniruddh Shekhawat
Aniruddh Shekhawat
NRNicholas G. Rudawski
Nicholas G. Rudawski
SMSaeed Moghaddam
Saeed Moghaddam
Toshikazu NishidaToshikazu Nishida
Toshikazu Nishida
Using a tiered deposition approach, Hf1-xZrxO2 (HZO) films with varying atomic layer deposition (ALD) cycles from 36 to 52 cycles were grown on Ge, Ir, and TiN substrates in single runs and annealed at 500 °C. 40 ALD cycle films grown on Ir exhibit a switched polarization (Psw) of 13 μC/cm2, while those grown on Ge and TiN did not exhibit measurable Psw values until 44 and 52 ALD cycles, respectively. High-resolution cross-sectional transmission electron microscopy confirmed these results; the ferroelectric films are crystalline with defined lattice fringes, while non-ferroelectric films remain amorphous. 52 ALD cycle 1:1 HZO grown on Ge had the highest Psw of all the films fabricated at 39 μC/cm2, while the 1:1 HZO grown on TiN displayed continuous wake-up and no fatigue up to 1010 cycles with the Psw increasing from <1 μC/cm2 to 21 μC/cm2.

21 January 2020 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
GWGlen Walters
Glen Walters
ASAniruddh Shekhawat
Aniruddh Shekhawat
SMSaeed Moghaddam
Saeed Moghaddam
JJJacob L. Jones
Jacob L. Jones
Toshikazu NishidaToshikazu Nishida
Toshikazu Nishida
The emerging field of ferroelectric hafnium zirconium oxide has garnered increased attention recently for its wide array of applications from nonvolatile memory and transistor devices to nanoelectromechanical transducers. Atomic layer deposition is one of the preferred techniques for the fabrication of hafnium zirconium oxide thin films, with a standard choice of oxidizer being either O3 or H2O. In this study, we explore various oxidizing conditions and report on the in situ treatment of hydrogen plasma after every atomic layer during the deposition of hafnium zirconium oxide to increase the virgin state polarization. Three different oxidization methods were utilized during the fabrication of the Hf0.5Zr0.5O2 films: H2O, O2 plasma, and O2 plasma followed by H2 plasma. The 10 and 8 nm thick films oxidized with only O2 plasma result in initially anti-ferroelectric films. Comparatively, the addition of H2 plasma after every O2 plasma step results in films with strong ferroelectric behavior. Peak shifting of the GIXRD pattern suggests that the sequential O2-H2 plasma films tend more to the orthorhombic phase as compared to the O2 plasma and H2O oxidized films.

27 March 2019 in Thin Solid Films
Verified
Journal Article
Closed access
ASAniruddh Shekhawat
Aniruddh Shekhawat
GWGlen Walters
Glen Walters
CCChing-Chang Chung
Ching-Chang Chung
RGRoberto Garcia
Roberto Garcia
YLYang Liu
Yang Liu
SMSaeed Moghaddam
Saeed Moghaddam

28 November 2016 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
YAYanbin An
Yanbin An
ASAniruddh Shekhawat
Aniruddh Shekhawat
ABAshkan Behnam
Ashkan Behnam
EPEric Pop
Eric Pop
AUAnt Ural
Ant Ural
Metal-oxide-semiconductor (MOS) devices with graphene as the metal gate electrode, silicon dioxide with thicknesses ranging from 5 to 20 nm as the dielectric, and p-type silicon as the semiconductor are fabricated and characterized. It is found that Fowler-Nordheim (F-N) tunneling dominates the gate tunneling current in these devices for oxide thicknesses of 10 nm and larger, whereas for devices with 5 nm oxide, direct tunneling starts to play a role in determining the total gate current. Furthermore, the temperature dependences of the F-N tunneling current for the 10 nm devices are characterized in the temperature range 77–300 K. The F-N coefficients and the effective tunneling barrier height are extracted as a function of temperature. It is found that the effective barrier height decreases with increasing temperature, which is in agreement with the results previously reported for conventional MOS devices with polysilicon or metal gate electrodes. In addition, high frequency capacitance-voltage measurements of these MOS devices are performed, which depict a local capacitance minimum under accumulation for thin oxides. By analyzing the data using numerical calculations based on the modified density of states of graphene in the presence of charged impurities, it is shown that this local minimum is due to the contribution of the quantum capacitance of graphene. Finally, the workfunction of the graphene gate electrode is extracted by determining the flat-band voltage as a function of oxide thickness. These results show that graphene is a promising candidate as the gate electrode in metal-oxide-semiconductor devices.