10 September 2018 in SAE International Journal of Advances and Current Practices in Mobility
The article discusses the features of designing a diagnostic system in which harmonic analysis is used to improve the quality of diagnostic information processing. The cyclic analog signal coming from the sensor and containing the diagnostic information is converted into a discrete signal. Accumulation of diagnostic information processed by equipment is carried out in the form of discrete signals. The processing and analysis of the obtained diagnostic information is carried out by applying harmonic analysis. Periodic processes of operation of vehicle units are associated with the occurrence of noise and vibration having a different frequency but related to the same node. A feature of the presented system is that it uses a contactless method of obtaining diagnostic information about the operation of vehicle units. The system calculates the speed of the node, measures the noise level and calculates the level of vibration that occurs during its operation. The article shows the results of experimental studies on the determination of vibration in vehicle nodes. Found relationship between the occurrence of noise and increasing the level of vibration of the node. The algorithm for the refinement of the harmonic analysis result is formalized, which makes it possible to eliminate the crude unpredictable error caused by the sampling of the analog signal. The application of pre-filtering algorithms analog signal from the sensor used to reduce the overall level of noise spectrum is substantiated. The article describes the structure of the diagnostic system allowing to determine the vibration level of rotating nodes. The use of harmonic analysis in the diagnostic system, in the conditions of a limited amount of diagnostic information, reduces the error in determining the amplitude of the vibration signal by 15-50%.
10 September 2018 in SAE International Journal of Advances and Current Practices in Mobility
This paper describes research focused upon improved the quality of automobile engine quality. Methods and models were developed for estimating and predicting the technical condition of internal combustion engine (ICE), which provides usage of the decision support making in the search for minimum fuel consumption regimes. We developed models of multi-criterion, multiparametric optimization of energy and material-material characteristics of ICE according to the system approach.The developed methods and models for estimating and predicting the technical state of the functionally interconnected and interacting ICE components are performed taking into account their hierarchy and topologies, energy resource used and the fuel. The cognitive methodology has been used to make engine models researches and analysis. The paper focuses on the fuzzy logic approach applying, considering the indeterminacy, incompleteness and unclear information in the engines operation processes. Cognitive, imitation and fuzzy models for estimating and predicting the technical state of ICE have been developed by the authors of this paper, which allowed to identify ICE’s most vulnerable components, set weight values, influence on fuel consumption according to the quantitative and qualitative energy interchange between ICE components.The received results provide quality enlargement of the ICE operation and their functional components, based on the developed estimation and prediction methods of their technical condition.The paper describes results the cross-platform software application which was implemented using the high-level Java programming language and XML markup language. Developed software allows us to provide user’s flexible interaction process with the module of the decision support system, which is based on implementation of the developed methods and models for the ICE technical condition estimating and predicting.Usage of the developed software helped to obtain optimization results of the energy and material characteristics of the explored ICE, which allows us to find several Pareto-optimal solutions for quality criteria that affect fuel consumption for each single model. This has led to a reduction of components wear, which leads to reducing fuel consumption during ICE operation.
10 September 2018 in SAE International Journal of Advances and Current Practices in Mobility
The article deals with experimental and theoretical researches of hydraulic processes in a system of accumulator fuel supplying (Common Rail) during the diagnosing while the vehicle idling and during the acceleration. The aim of the work is to assess the efficiency of the offered diagnosing technique as the point of view of cutting-down time for troubleshooting and as the point of view of increasing reliability of failure localization. Feature of the presented approach is that it uses the analysis of fuel pressure fluctuations in the high pressure hydroaccumulator, synchronously with the analysis of rotary speed of an engine crankshaft and the steering signals on electromagnetic magnets (or piezoelements) of injectors. The technique uniting preliminary diagnosing of Electronic Engine Control (EEC) and components of the vehicle fuel units during the constant remote monitoring process, and deep, detailed diagnosing at a service station is described. The technique considers a possibility of onboard self-diagnosing OBD-II system and its interaction with the built-in monitoring system, and possibilities of the analysis of the technical condition fuel elements, using the pressure fluctuations of fuel, that register by the regular sensor of system pressure control fuel. Regularities of the fuel units and components failures emergence and an electronic control system of the diesel engine 1VD-FTV during the operation, with monitoring system are experimentally defined. Separate research for instant preliminary superficial detection of failure by means of remote monitoring on the Toyota Land Cruiser LC 200 vehicle was conducted. The separate inquiry on deep express diagnosing of the technical condition of the fuel units of the vehicle at the service station was held also. Monitoring process gives preliminary localization, the mode of appearance and degree of the importance of a failure, and further diagnosing at a service station deeper localization and specification of a technical condition of unit in which failure is arises. Using the method of the mathematical modeling the oscillatory processes arising in the fuel accumulator as in serviceable as in faulty were described. The analysis of experimental results is showed that combined using the remote system of monitoring built-in the vehicle and express diagnosing systems such as fuel pressure fluctuations in the hydro accumulator (at the service station) allows to reduce great deal of time for troubleshooting and to increase accuracy of diagnosis.
1 February 2020 in IOP Conference Series: Materials Science and Engineering
The paper presents the results of the classification analysis model for structuring of processed large volumes of heterogeneous diagnostic data about the technical state of complex equipment in transport development and research. Concept for the description and structuring of big data is proposed based on the formation of a metadata scheme using logical breakdown of all technical diagnostic data on the output variable - the technical condition of complex technical equipment in transport. A functional assessment of the technical condition complex technical system’s elements in transport is developed based on the application of methods for assessing structural and functional risks of failures. The article presents the results of assessing the accuracy of the input data sets classification using created decision trees models to effectively structuring and presenting the data in order to ensure that the procedures for their further analysis are performed. As a result of using the developed simulation model of structuring and presenting large heterogeneous diagnostic data volumes about the state of complex technical equipment in transport the time costs were reduced and the efficiency of analytical operations to study data for solving diagnostic problems and predicting complex system’s technical condition was improved.
26 December 2016 in Eastern-European Journal of Enterprise Technologies
In the course of devising and examining a method for the estimation and prediction of technical condition of ship CTS, operated under conditions of unpredictable extreme and technogenic impacts, we received new theoretical and practical results. A place in the hierarchy and topology of the FIIS elements of ship CTS is defined based on the characteristics of the energy, material and information resources used by the systems in the devised method for the estimation and prediction of technical condition of CTS. The most vulnerable elements of FIIS of ship CTS are found with regard to their weight values in the systems, obtained by cognitive imitation and fuzzy simulation. The CTS elements, prone to failures, are determined by their advance detection by modeling the processes of decision making support in the search for reasons of failures. The strategy of restoring the FIIS elements of ship CTS with decision making support when searching for the reasons of their failures is based on the prediction of change in the probability of losing working ability and risk of failures of the elements. The obtained results improve reliability of ship CTS in the operation under conditions of extreme and technogenic impacts.