Function‐integrative lightweight engineering represents an essential element in modern design methods. Currently, there is a great need for the incorporation of sensors, actuators and electronics in novel, demand‐oriented components. In contrast to a subsequent, mostly adhesive bonding, structural integration offers numerous advantages, for example in terms of space requirements and robustness. This paper demonstrates the potential of integrated sensors for various industrial sectors based on selected examples from mechanical engineering, aviation, mobility, sports, and medical technology.
1 January 2008 in Archives of Civil and Mechanical Engineering
The absence of sufficient knowledge of the heterogeneous damage behaviour of textile reinforced composites, especially under combined in-plane and out-of-plane loadings, requires the development of multi-scale experimental and numerical methods. In the scope of this paper, three different types of plain weave fabrics with increasing areal weight were considered to characterise the influence of ondulation and nesting effects on the damage behaviour. Therefore an advanced new biaxial testing method has been elaborated to experimentally determine the fracture resistance at the combined biaxial loads. Methods in image processing of the acquired in-situ CT data and micrographs have been utilised to obtain profound knowledge of the textile geometry and the distribution of the fibre volume content of each type. Combining the derived data of the idealised geometry with a numerical multi-scale approach was sufficient to determine the fracture resistances of predefined uniaxial and biaxial load paths. Thereby, Cuntze’s three-dimensional failure mode concept was incorporated to predict damage and failure. The embedded element method was used to obtain a structured mesh of the complex textile geometries. The usage of statistical and visualisation methods contributed to a profound comprehension of the ondulation and nesting effects.