1 January 2021 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. To increase the stability of the wellbore during its construction in unstable rocks. Methodology. To solve the set tasks, an integrated approach is used in the work, which includes critical analysis and generalization of scientific and technical achievements in combination with theoretical and experimental research. Findings. Factors influencing the stability of the borehole walls in conditions prone to rock slides and rock falls are analyzed. Expediency of using baths for strengthening the walls of wells in deposits of clay rocks, including clay shales, has been established and substantiated. A formulation of a fuel-bituminous bath has been proposed, the installation of which in a well for 78 hours makes it possible to increase the initial compressive strength of rocks, which will ensure the integrity of the borehole walls. It is recommended to use corrugated casing pipes to cover the sections of the wellbore where there is intensive crumbling and collapse of rocks. Originality. For the first time, the main factors of wall destruction have been established and a method has been developed to prevent the destruction of walls of directional wells composed of rocks prone to loss of stability under the action of drill string loads. Practical value. To combat the collapse of the walls of the well composed of rocks, prone to loss of stability, the authors suggested setting up fuel-bituminous baths in the range of complications. In case when the collapse of the walls of the well can not be prevented with a fuel-bitumen bath, it is proposed to overlap the area of collapse with the casing using advanced corrugated casing pipes with the injection of adhesive into the rock mass in the near-wellbore zone. The use of an adhesive material increases the contact area of the metal shell with the rock, which collapses increasing the stability of the borehole walls.
1 January 2019 in Procedia Structural Integrity
30 December 2023 in Mining of Mineral Deposits
Purpose. Development of a methodology for determining the thermal state of block inverse gravel filters manufactured using low-temperature technology during their transportation in a well based on computer and mathematical modeling. Methods. The study of hydrodynamic processes occurring during the transportation of the filter in the borehole, as well as the calculation of thermal fields in the filter body, was performed using the Ansys Fluent software package. To determine the effective thermophysical characteristics of the filter, the approaches of the heat transfer theory in porous media were applied. To investigate the thermal conditions of the filter at heat exchange with well fluid, the use of analytical solution of the heat conduction problem in a cylindrical shell, taking into account the properties of porous dispersed water-saturated medium, is proposed. Findings. The methodology for calculating the thermal state of a gravel filter during its operation in a well has been developed. For estimation of the filter surface temperature, the expression obtained on the basis of the analytical solution of the heat conduction equation, taking into account the characteristics of the porous filter medium, is proposed. Hydrodynamic and thermal fields in the borehole and the filter body during the filter transportation process in the borehole have been obtained. Originality. For the first time, the problem of heat exchange of a gravel inversion filter, manufactured by low-temperature technology in a well is considered. The influence of hydrothermal conditions in the well on the process of filter heating during its transportation in the well is shown. The hydrodynamic fields during the flow of the drilling mud around the inverse gravel filter are determined. Practical implications. The proposed approaches and results of the study allow to determine and can be used in the development of technological regulations for the use of block gravel filters produced by low-temperature technology for the equipment of hydrogeological wells. The methodology for modelling the process of two-phase inversion transition of aggregate state of the binding agent during transportation of inverted block-type gravel filter during well construction has been developed.
22 October 2019 in E3S Web of Conferences
The purpose of the work is to increase the insulation work efficiency by using thermoplastic mixes based on polyethylene terephthalate. The tasks set were solved by a complex method of research, including the analysis and synthesis of the literary and patent sources, as well as conducting the analytical and experimental studies. The experimental data were processed on a PC using the methods of mathematical statistics. A method for insulating the absorbing horizons with thermoplastic materials has been developed and substantiated. To implement it, the following technological operations should be performed: supply of the thermoplastic materials to the borehole bottom, melting and squeezing of thermoplastic materials into absorption channels. For various geological and technical conditions of drilling, technological schemes of insulating the absorbing horizons with thermoplastic materials are proposed. The use of the household waste based on polyethylene terephthalate has been proposed as the plugging material to insulate the absorbing horizons of boreholes. For the first time, the possibility of using the household waste based on polyethylene terephthalate as the plugging thermoplastic material has been substantiated and proved. For the first time, a method for determining the efficient range of technology application for absorbing and unstable horizons insulation with thermoplastic materials through the use of bottom hole thermal sources has been substantiated analytically.
17 July 2020 in Management Systems in Production Engineering
In the period of shortage of gas supply, special attention is given to reducing the supply of gas to its consumers, that is, their complete and uninterrupted gas supply. Increasing gas losses associated with technological transportation costs, in particular caused by gas flow instability and frequent changes in gas transmission network operating modes. Considering losses due to unreliability of gas pumping is one of the important tasks of gas supply optimization. The purpose of the study is to develop an optimization mathematical model that will simultaneously take into account the factors of reliability and minimum lossesIn the general case, the optimization calculations of the modes of operation of the main gas pipelines are intended to solve three main problems: determining the maximum productivity, calculating the optimal mode with a given productivity and choosing the optimal strategy, the development of the pipeline. On the basis of approaches of simulation modeling of complex systems, a multi-parameter mathematical model of gas supply process optimization was developed. It is shown that a comparative analysis of the forecast and actual indicators of the operating modes of the plunger gas pumping unit shows their satisfactory convergence. The performance of the compressor operation period in the process of injection according to the forecast deviates from the actual value for the whole period of operation of the plunger gas pumping unit in 2016 by 2.98%. The optimization problem of gas pumping planning is considered, taking into account the expected losses, on the basis of which the transfer of the controlled system from the initial state to the final one is carried out by such a sequence of states that minimizes the total cost of the system evolution.