Anastasiia Kucherenko

Anastasiia Kucherenko

Auto-generated profile, based on publicly available information

Anastasiia Kucherenko

Department of Chemical Technology of Plastics Processing, Lviv Polytechnic National University, 12, St. Bandera Str., 79013 Lviv, Ukraine

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 June 2020 in Materials
Verified
Journal Article
Open access
PDF file
VMVolodymyr Moravskyi
Volodymyr Moravskyi
AKAnastasiia Kucherenko
Anastasiia Kucherenko
MKMarta Kuznetsova
Marta Kuznetsova
LDLudmila Dulebová
Ludmila Dulebová
Emil SpišákEmil Spišák
Emil Spišák
JMJanka Majerníková
Janka Majerníková
Metal-filled composites based on polypropylene waste have been successfully obtained with an injection molding method of metalized polymer raw materials. Using the model polymer, the peculiarities of the formation of the copper layer in solutions of chemical metallization on the polypropylene surface were investigated and the main factors influencing this process were established. The main influence on the rate of reduction of copper in solutions of chemical metallization has the concentration of copper sulfate, sodium hydroxide, and EDTA-Na2. It was shown that the efficiency of the copper plating process also strongly depends on polymer processing, which follows the activation. In case of the use of simple activation, it is not possible to obtain metalized raw materials with high efficiency. Additional processing of activated polymer raw materials is required to carry out the process with high efficiency. The amount of reduced copper on the polymer surface can be adjusted by changing the concentration of the components of the chemical metallization solution, as well as the degree of loading of the polymer raw material. Examination by electron scanning microscopy of the obtained metalized polypropylene showed that the copper coating on the polymer particles is formed with a high degree of surface coverage. The formed copper coating is free of copper oxides, which is confirmed by X-ray diffraction studies and analysis of the spectrum of characteristic X-rays. Metal-filled composites have been characterized by the effect of copper on mechanical and rheological (MFR) properties. The Differential Scanning Calorimetry (DSC) and Thermogravimetric (TG) methods show a certain effect of metal on the magnitude of thermal effects and the rate of weight loss.

17 May 2018 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
VMVolodymyr Moravskyi
Volodymyr Moravskyi
AKAnastasiia Kucherenko
Anastasiia Kucherenko
MKMarta Kuznetsova
Marta Kuznetsova
IDIryna Dziaman
Iryna Dziaman
OGOleksandr Grytsenko
Oleksandr Grytsenko
LDLudmila Dulebová
Ludmila Dulebová
Influence of concentration of components of chemical metallization solutions on the process of copper reduction on activated polyvinylchloride surface has been studied. It has been established that changes in concentrations of copper sulfate, trilon B and formaldehyde can effectively influence the metallization process. It was shown that the loss of stability of chemical metallization solutions and formation of colloidal solutions makes it is impossible to obtain a metallized polymeric material since copper reduction occurs in the solution volume. Copper reduction in the solution volume occurs because of presence of insoluble colloidal particles of copper hydroxide which are centers of nucleation of copper reduction. At such centers, copper reduction occurs as a result of reaction with formaldehyde and is accompanied by high volumes of hydrogen evolvement. It has been established that the formation of copper coating on an activated polymer surface occurs only with the use of true chemical metallization solutions. The main factor determining stability of chemical metallization solutions is complexing. It was shown that trilon B concentration under 40 mmol/l is not sufficient to bind all Cu2+ ions in a complex which prevents formation of insoluble copper hydroxide in an alkaline medium. The growth of trilon B concentration above 53 mmol/l results in reduction of a portion of copper in a form of hydroxide and formation of true solutions. It has been established that concentration of copper sulfate and alkali exerts the main influence on the mechanism of copper reduction in the case of true solutions. The growth of pH of chemical metallization solutions above 12 brings about an increase in the portion of copper that is reduced by the exchange reaction with zinc.

5 January 2022 in Polymers
Verified
Journal Article
Open access
PDF file
VMVolodymyr Moravskyi
Volodymyr Moravskyi
AKAnastasiia Kucherenko
Anastasiia Kucherenko
MKMarta Kuznetsova
Marta Kuznetsova
LDLudmila Dulebová
Ludmila Dulebová
Emil SpišákEmil Spišák
Emil Spišák
The research studied the feasibility of using copper-coated polyethylene granules as a basis for creating efficient heat storage systems. A technology for imparting catalytic properties to a polymer surface by the joint processing of polymer granules and an activator metal in a ball mill with their subsequent metallization in a chemical reducing solution is proposed. The efficiency of copper-coating a polyethylene surface is shown to be largely determined by the activation stage and the assumption regarding the mechanism of interaction of the activator metal with the polymer surface is made. To obtain different amounts of metal on the polyethylene granules, it is proposed that the method of remetallization is used. It was established that the rate of copper ion reduction depends on the number of previous coatings and is determined by the area of interaction of the metal-coated granules with the chemical reducing solution. The obtained metal-coated polyethylene granules were characterized in terms of the viability of using it as a phase transition material for a heat storage system. Using the developed installation that simulates the heat accumulator operation, it was shown that the efficiency of using metal-coated polyethylene granules to create heat storage systems is higher. The copper coating deposited on the polyethylene granules was studied using scanning electron microscopy and X-ray diffraction analysis.

1 November 2020 in Chemistry, Technology and Application of Substances
Verified
Journal Article
Open access
LULviv Polytechnic National University
Lviv Polytechnic National University
АKА. N. Kucherenko
А. N. Kucherenko
SMS. О. Mankevych
S. О. Mankevych
MKMarta Kuznetsova
Marta Kuznetsova
VMVolodymyr Moravskyi
Volodymyr Moravskyi
The results of experimental studies of the peculiarities of metallization of granular polyethylene are presented. The influence of concentration factors on the metallization process of zinc-activated polyethylene granules of brand Liten PL-10 was investigated. It is established that by changing the concentration of copper sulfate and sodium hydroxide, as well as the degree of loading of polymeric raw materials, it is possible to effectively regulate the amount of recovered copper on granules of polyethylene, and therefore the thickness of the metal layer formed on them. The use of the method of preliminary processing of activated polyethylene granules in a solution of copper sulfate can significantly reduce the induction period and increase the rate of recovery of copper ions.

15 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
VMVolodymyr Moravskyi
Volodymyr Moravskyi
AKAnastasiia Kucherenko
Anastasiia Kucherenko
MKMarta Kuznetsova
Marta Kuznetsova
LDLudmila Dulebová
Ludmila Dulebová
Emil SpišákEmil Spišák
Emil Spišák
The paper analyzes the prospects of using a heat-accumulating material consisting of metallized polyethylene granules. X-ray diffraction analysis has been used to study the influence of the number of heating and cooling cycles of the heat-accumulating material on the change in the degree of crystallinity of polyethylene. It was shown that the proposed heat-accumulating material showed a low resistance and a significant decrease in the degree of crystallinity of polyethylene under the experimental conditions. The crystal structure of polyethylene did not change during cyclic heating and cooling. Grounded on the obtained experimental results, it was determined that a high degree of polyethylene crystallinity is being kept for 200–300 heating-cooling cycles.