Hamza El Ghannudi

Hamza El Ghannudi

Auto-generated profile, based on publicly available information

Hamza El Ghannudi

RF Microtech Company, Perugia, Italy

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2021 in IEEE Access
Verified
Journal Article
Open access
Martino AldrigoMartino Aldrigo
Martino Aldrigo
Mircea DragomanMircea Dragoman
Mircea Dragoman
Sergiu IordanescuSergiu Iordanescu
Sergiu Iordanescu
Marius Andrei AvramMarius Andrei Avram
Marius Andrei Avram
Octavian Gabriel SimionescuOctavian Gabriel Simionescu
Octavian Gabriel Simionescu
AZA. Ziaei
A. Ziaei
In this work, we present a tunable 24-GHz antenna array based on a CMOS-compatible 110-nm-thick nanocrystalline graphite film grown by plasma enhanced chemical vapor deposition. The film has a nominal bulk conductivity exceeding 16000 S/m (hence, greater than any graphene monolayer or industrially available graphene multilayer) but still able to show an outstanding modulation of its charge carrier density in the upper microwave spectrum. The manufactured layer was used to design, simulate, fabricate, and test a 24-GHz patch antenna array, with each radiating element having overall dimensions of just λ 0 /8×λ 0 /7. The fabricated array exhibits a measured maximum gain of about 3 dBi around 24 GHz (unbiased state), with a half-power beam width of only 14.5° (suitable in wireless links where a high directivity is envisaged). Spanning the dc bias voltage between -25 V and 25 V at 24 GHz, the gain can be tuned continuously between -1.5 dBi and 4 dBi, whereas the resonance frequency undergoes a maximum shift of 166 MHz. This voltage-dependent tuning of the gain represents a first step in developing carbon-based applications to control amplitude and phase simultaneously and independently. These results (never reported) demonstrate the big potential of nanocrystalline graphite for high-performance microwave components that are CMOS compatible (a highly desirable characteristic for high fabrication yield and large-scale production), with unprecedented tunability for next-generation high-capacity communications.

19 November 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
MZMeng Zhang
Meng Zhang
HGHamza El Ghannudi
Hamza El Ghannudi
LMLuca Marcaccioli
Luca Marcaccioli
SMSimone Montori
Simone Montori
Xiue BaoXiue Bao
Xiue Bao
BNBart Nauwelaers
Bart Nauwelaers
A highly sensitive, large throughput and wide dynamic range (in the aspect of size and material type) broadband tunable microwave interferometer based rectangular waveguide wear debris detection system is presented. Passing of (non)ferrous and (non)conductive particles through the sensor, which causes inductance and/or capacitance changes, are detected as transmission signal variations of the system. We first demonstrate the sensing principle with the aluminum particle of $800~\mu \text{m}$ and epoxy resin particle of 1 mm 3 at 6 GHz. Then, the effects of particle size and flow speed are tested with aluminum particles ranging from $200~\mu \text{m}$ to 1.8 mm. The measurement results show that the system is able to measure particle sizes with known material and differentiate nonconductive particles from conductive ones. With the proposed data processing techniques, this system is capable of detecting as small as $76~\mu \text{m}$ particles within an 8 mm outer diameter tube. And with future improvements on sensitivity and particle material characterization, the proposed system has the potential to differentiate (non)ferrous and (non)conductive particles and measure their sizes as a real-time wear debris sensing devices for rotating and reciprocating machines.