23 August 2023 in Acta Materialia
22 January 2024 in Communications Materials
ASAparna P. A. Subramanyam
+4
Pushing the maximum service temperature of aircraft engines and industrial gas turbines is the major pathway to improve their energy efficiency and reduce CO2 emissions. This maximum is mostly limited by the temperature capability of key-component materials, including superalloys. In this alloy class, segregation of elements facilitates plastic deformation and is generally considered to cause softening during high-temperature deformation. Here, we show that segregation-assisted processes can also lead to strengthening and induce an anomalous increase of the yield strength. Atomic-resolution transmission electron microscopy and density functional theory calculations reveal a segregation-assisted dissociation process of dislocations at precipitate-matrix interfaces in combination with atomic-scale reordering processes. These processes lead to an inhibition of athermal deformation mechanisms and a transition to stacking fault shearing, which causes the strengthening effect. Unraveling these elementary mechanisms might guide a mechanism-based alloy design of future superalloys with enhanced high-temperature capabilities.
22 December 2021 in Philosophical Magazine
Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence of the base elements on the deformation behaviour, high-temperature compressive creep experiments were performed on a single crystal alloy series that was designed to exhibit a varying Co/Ni ratio and a constant Al, W and Cr content. Creep tests were performed at 900 °C and 250 MPa and the resulting microstructures and defect configurations were characterised via electron microscopy. The minimum creep rates differ by more than one order of magnitude with changing Co/Ni ratio. An intermediate CoNi-base alloy exhibits the overall highest creep strength. Several strengthening contributions like solid solution strengthening of the γ phase, effective diffusion coefficients or stacking fault energies were quantified. Precipitate shearing mechanisms differ significantly when the base element content is varied. While the Ni-rich superalloys exhibit SISF and SESF shearing, the Co-rich alloys develop extended APBs when the γ′ phase is cut. This is mainly attributed to a difference in planar fault energies, caused by a changing segregation behaviour. As a result, it is assumed that the shearing resistivity and the occurring deformation mechanisms in the γ′ phase are crucial for the creep properties of the investigated alloy series.
19 August 2024 in Scripta Materialia
5 September 2022 in Scripta Materialia
17 September 2024 in Acta Materialia