Amir Hakemi

Amir Hakemi

Auto-generated profile, based on publicly available information

Amir Hakemi

School of Electrical Engineering and Robotics, Queensland University of Technology (QUT), Brisbane City, QLD 4000, Australia

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
AHAmir Hakemi
Amir Hakemi
DJDejan Jovanovic
Dejan Jovanovic
MVMahinda Vilathgamuwa
Mahinda Vilathgamuwa
GWGeoff Walker
Geoff Walker
JPJo P. Pauls
Jo P. Pauls
In a typical wireless power transfer (WPT) system, the load, the mutual inductance, and the required tuning frequency can vary in a particular range. Variation of each parameter can substantially impact the dynamic characteristics of the system. Thus, they can be considered as sources of uncertainty in the system. To address this, robust control methods such as μ-synthesis are developed to deal with possible system uncertainties. This article first undertakes the generic dynamic analysis of the series–series WPT compensation network for two modes of operation, i.e., constant output voltage (COV) mode and constant output current (COC) mode, in the presence of three aforementioned uncertainty sources. Subsequently, the frequency detuning as a function of the compensation capacitor variation is explored and broadened as a technique to obtain the optimized compensation capacitor value that can lead to a plant with minimized dynamic deviations from its nominal system in the operating range between COC and COV modes. As such, this approach offers a design procedure for a least conservative robust controller, which can significantly improve the system performance. The optimized structure and the corresponding designed μ-synthesis controller are comprehensively elaborated. The theoretical achievements and experimental results show superior dynamic performance of the optimized structure and the corresponding designed controller in the presence of three uncertainty sources compared to the COC and COV modes of operation.

28 March 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ABAmir Masoud Bozorgi
Amir Masoud Bozorgi
AHAmir Hakemi
Amir Hakemi
MFMehdi Farasat
Mehdi Farasat
Mohammad MonfaredMohammad Monfared
Mohammad Monfared
Common-mode voltage (CMV) is known as a major cause of premature motor failures. The form and amplitude of the CMV generated by any converter depends on both the circuit topology and modulation technique. Among single stage AC/AC converters employed in drive applications, the Z-source ultra-sparse matrix converter (ZSUSMC) is a desirable choice due to reduced number of switches in its structure and voltage boosting capability. Based on these considerations, this paper aims to: 1) theoretically determine and compare the CMV of the ZSUSMC with four well-known impedance networks, namely cascaded, switched-inductor, quasi and series, in its structure, and 2) propose modulation techniques for CMV reduction in the ZSUSMCs. To this end, first, it is shown that the ZSUSMC, depending on the impedance network used in its structure, provides more freedom to choose from redundant switching states compared to the ultra-sparse matrix converter. Then, by taking advantage of this feature, novel modulation strategies that attenuate the CMV without affecting the boosting capability are developed. The proposed modulation schemes are based on avoiding the switching states most contributing to the CMV during a switching period. Through hardware-in-the-loop studies, the effectiveness of the proposed modulation strategies in reducing the CMV of the ZSUSMCs is verified.

5 December 2022
Verified
Conference Paper
Closed access
AMArash Moradi
Arash Moradi
SGSaman Asghari Gorji
Saman Asghari Gorji
AHAmir Hakemi
Amir Hakemi
AGAmir Ganjavi
Amir Ganjavi
Dezso SeraDezso Sera
Dezso Sera
In this paper, the configuration of a cutting-edge DC Micro-Grid system to produce Hydrogen (DCMG-H2) from Renewable Energy Sources (RESs) is described. Towards that aim, first, the practical insight on preferring a DCMG to an AC Micro-Grid (ACMG) system is elucidated. This analysis clearly highlights the unnecessary power conversions in an ACMG in practice, when the system can be converted to a DCMG. Next, based on eliminating these AC-DC converter components from ACMG, an efficient fully DCMG system is introduced that contains DC loads, such as electrolysers, and Photovoltaic (PV) and Battery Energy Storage (BES) systems. The proposed investigations can significantly address the new technical demand for implementing DCMG-H2 using the low-cost energy from PVs and can enable up-scaling of hydrogen production. The performance of the proposed DCMG configuration is verified by presenting the 24 hours simulation results of a similar real-world network.

3 February 2023 in Energies
Verified
Journal Article
Open access
PDF file
AHAmir Hakemi
Amir Hakemi
DJDejan Jovanovic
Dejan Jovanovic
MVMahinda Vilathgamuwa
Mahinda Vilathgamuwa
GWGeoff Walker
Geoff Walker
In recent times, wireless power transfer systems have been identified as a reliable option to supply power to medical implants. Up to now, Wireless Power Transfer Systems (WPTS) have only been used to charge batteries of low-power medical implants. However, for medical implants requiring a relatively higher power, such as a ventricular assist device, which is an implanted blood pump in the patient’s abdominal cavity, an external power supply has been used. When WPTS is used for medical implants, it increases the number of required power converter stages and hardware complexity along with the volume, which tends to reduce the overall efficiency. In addition, the existence of uncertainties in WPTS-based medical implants, such as load and mutual inductance variations, can lead to system instability or poor performance. The focus of this paper is to design a WPTS to supply power to the pump motor directly through its inverter based on the requirements of the motor drive system (MDS) without resorting to an additional DC-to-DC converter stage. To this end, the constraints that the drive system imposes upon WPTS have been identified. In addition, to make a reliable closed-loop operation, a µ-synthesis robust controller is designed to make sure the system maintains its stability and performance with respect to the system’s existing uncertainties. A number of experimental results are provided to verify the effectiveness of the adopted WPTS design approach and the corresponding closed-loop controller for WPTS. Furthermore, the experimental findings for the maximum efficiency tracking (MET) approach (to minimize WPTS coil losses) and constant DC link voltage control approach are shown and compared. According to experimental results and system efficiency analysis, the former appears to perform better. The system dynamic performance analysis, on the other hand, demonstrates the latter’s advantage.