Josef Keilhofer

Josef Keilhofer

Auto-generated profile, based on publicly available information

Josef Keilhofer

Department of Mechanical Engineering TUM School of Engineering and Design Institute for Machine Tools and Industrial Management Technical University of Munich 85748 Garching Germany

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2021 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
RMRobert Morasch
Robert Morasch
JKJosef Keilhofer
Josef Keilhofer
HGHubert A. Gasteiger
Hubert A. Gasteiger
BSBharatkumar Suthar
Bharatkumar Suthar
Two of the main factors influencing the performance of Li-ion battery (LIB) electrodes are the kinetic losses due to the charge transfer resistance of the active material ( R ct ) and the ionic transport resistance in the electrolyte phase within the electrode pores ( R ion ). Seeking to increase the energy density of LIBs, ever higher active material loadings are applied, resulting in thicker electrodes for which R ion becomes dominant. As electrochemical impedance spectroscopy is commonly used to quantify R ct of electrodes, understanding the impact of R ion on the impedance response of thick electrodes is crucial. By use of a simplified transmission line model (TLM), we simulate the impedance response of electrodes as a function of electrode loading. This will be compared to the impedance of graphite anodes (obtained using a micro-reference electrode), demonstrating that their impedance response varies from purely kinetically limited at 0.6 mAh cm−2 to purely transport limited at 7.5 mAh cm−2. We then introduce a simple method with which R ct and R ion can be determined from the electrode impedance, even under transport limited conditions. Finally, we show how the initially homogenous ionic current distribution across porous electrodes under kinetically limited conditions becomes severely inhomogeneous under transport limited conditions.

23 May 2022 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
LHLucas Hille
Lucas Hille
HTHans-Christoph Toepper
Hans-Christoph Toepper
CSCharlotte Schriever
Charlotte Schriever
JKJohannes Kriegler
Johannes Kriegler
JKJosef Keilhofer
Josef Keilhofer
MZMichael F. Zaeh
Michael F. Zaeh
In this study, the influence of calendering and laser structuring on the pore structure and electrochemical performance of electrodes is reported. Graphite anodes of varying bulk porosity were micro structured with pulsed laser radiation. Using scanning electron microscopy and energy-dispersive X-ray spectroscopy, laser structuring was found to release superficial pore clogging caused by calendering and to result in binder agglomerates on the electrode surfaces. Structured electrodes showed higher porosities than their unstructured counterparts due to a thickness increase and material removal, but no significant change in the pore size distribution was detected using mercury intrusion porosimetry. Electrochemical impedance spectra of symmetric battery cells revealed increasing ionic resistances and tortuosities for decreasing electrode porosities. Laser structuring significantly reduced the underlying lithium-ion diffusion limitations at all porosity levels. In a discharge rate test, performance deteriorations at high currents were found to be amplified by calendering and could be diminished by electrode structuring. The performance improvements by laser structuring moved towards lower C-rates for stronger compressed anodes. Despite their growth in thickness and porosity, laser structured graphite anodes showed a higher volumetric energy density at high currents than unstructured electrodes, which demonstrates the potential of electrode structuring for highly compressed anodes.

19 February 2024 in Advanced Functional Materials
Verified
Journal Article
Open access
JKJohannes Kriegler
Johannes Kriegler
HBHeiko Ballmes
Heiko Ballmes
SDSerge Dib
Serge Dib
ADAli Gökhan Demir
Ali Gökhan Demir
LHLucas Hille
Lucas Hille
MZMichael Zaeh
Michael Zaeh
Incorporating lithium metal anodes in next‐generation batteries promises enhanced energy densities. However, lithium's reactivity results in the formation of a native surface film, affecting battery performance. Therefore, precisely controlling the chemical and morphological surface condition of lithium metal anodes is imperative for producing high‐performance lithium metal batteries. This study demonstrates the efficacy of laser treatment for removing superficial contaminants from lithium metal substrates. To this end, picosecond‐pulsed laser radiation is proposed for modifying the surface of lithium metal substrates. Scanning electron microscopy (SEM) revealed that different laser process regimes can be exploited to achieve a wide spectrum of surface morphologies. Energy‐dispersive X‐ray spectroscopy (EDX) confirmed substantial reductions of ≈80% in oxidic and carbonaceous surface species. The contamination layer removal translated into interfacial resistance reductions of 35% and 44% when testing laser‐cleaned lithium metal anodes in symmetric all‐solid‐state batteries (ASSBs) with lithium phosphorus sulfur chloride (LPSCl) and lithium lanthanum zirconium oxide (LLZO) solid electrolytes, respectively. Finally, a framework for integrating laser cleaning into industrial battery production is suggested, evidencing the industrial feasibility of the approach. In summary, this work advances the understanding of lithium metal surface treatments and serves as proof of principle for its industrial applicability.

13 April 2024 in Energy Technology
Verified
Journal Article
Open access
LHLucas Hille
Lucas Hille
JKJosef Keilhofer
Josef Keilhofer
RMRoman Mazur
Roman Mazur
RDRuediger Daub
Ruediger Daub
MZMichael F. Zaeh
Michael F. Zaeh
Lithium‐ion batteries inherently suffer from a target conflict between a high energy density and a high power density. The creation of microscopic holes in the electrodes alleviates the trade‐off by facilitating lithium‐ion diffusion. This study presents a novel concept for electrode structuring called structure calendering, combining mechanical embossing (MEC) and calendering. It is compared to the widely investigated laser ablation (LAS) process by structuring graphite anodes and examining their geometrical, mechanical, and electrochemical properties. It is shown that structure calendering results in wider and deeper holes of higher reproducibility than laser structuring. As a consequence of the different hole‐creation mechanisms, laser structuring induces a surface elevation around the holes while clogged pores are observed in the lateral walls of mechanically structured holes. In pull‐off tests, no pronounced impact of electrode structuring on the mechanical electrode properties is discerned. Structuring of electrodes using both methods yields significantly reduced electrode tortuosities and enhanced discharge rate performances. From a production engineering perspective, structure calendering has advantages over laser structuring in terms of material loss, processing rate, and investment costs, while the latter offers higher flexibility, precision, and presumably lower maintenance efforts. In conclusion, structure calendering represents an attractive process alternative to laser structuring.

1 November 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
JKJosef Keilhofer
Josef Keilhofer
FDFilip Adam Dorau
Filip Adam Dorau
HHHao-Chen Hsiao
Hao-Chen Hsiao
BSBharatkumar Suthar
Bharatkumar Suthar
RDRüdiger Daub
Rüdiger Daub
Lithium-ion batteries play a key role in electrifying the transport sector. However, short charging times are crucial for consumers to accept battery electric vehicles (BEV). Fast charging makes the battery vulnerable to lithium plating, which leads to rapid cell aging and can cause a thermal runaway. Hence, a strict criterion in the optimization and adaption of fast charging processes is avoiding lithium plating. Simple plating detection methods are needed to optimize and adjust charging strategies precisely. In this study, a stepwise simplification of a lithium plating detection method from a three-electrode setup to a full cell setup is deduced. An equivalent circuit model is used to explain a sudden drop in cell impedance during fast charging, which is a characteristic feature of the lithium plating onset. This feature also appears in the full cell impedance and can be observed by measuring the impedance at one single frequency. Suitable frequencies lie in a low frequency range, where the measurements can be performed with simple devices that may be integrated into a BEV’s battery management system (BMS). Measuring the lithium plating behavior during operation over its lifespan allows continuous adjusting of the charging strategy, which enables faster charging and improves safety.

1 May 2025 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
SHSimon Helmer
Simon Helmer
RMRobert Morasch
Robert Morasch
JKJosef Keilhofer
Josef Keilhofer
HGHubert A. Gasteiger
Hubert A. Gasteiger
BSBharatkumar Suthar
Bharatkumar Suthar
Determining the solid diffusion coefficient of lithium in graphite anode active materials for lithium-ion batteries is challenging due to the complex intercalation dynamics, the structural complexity, particle size/shape distribution, and the superposition of liquid electrolyte transport processes in the pores of an electrode. To minimize these influences, we examined the lithiation of highly oriented pyrolytic graphite (HOPG) disk electrodes, with the basal planes stacked normal to the disk thickness (0.5 mm). At first, the radially progressing lithiation of the HOPG disks was followed in situ by top-view optical monitoring of the golden LiC6 phase. However, post-mortem analysis of split HOPG disks revealed that HOPG crystal surface imperfections lead to the artefact that the apparent LiC6 phase progression determined from top-view images does not correspond to that in the bulk of the disks. Thus, the LiC6 phase front position can only be quantified through post-mortem analysis of split HOPG disks. The intercalation time and temperature dependence of the LiC6 phase progression can be reasonably well described by a Fickian diffusion model in cylindrical geometry, yielding an apparent diffusion coefficient of the LiC6 phase front of D 0 = 0.6–1.0 × 10−13 m2 s−1 at 25 °C, with an activation energy of E a = 35.4–39.0 kJ mol−1 (between 10–55 °C).