Johannes Kriegler

Johannes Kriegler

Auto-generated profile, based on publicly available information

Johannes Kriegler

Technical University of Munich, Germany; TUM School of Engineering and Design, Department of Mechanical Engineering, Institute for Machine Tools and Industrial Management, Boltzmannstr. 15, 85748 Garching, Germany

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 November 2019 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
JHJan Bernd Habedank
Jan Bernd Habedank
JKJohannes Kriegler
Johannes Kriegler
MZMichael F. Zaeh
Michael F. Zaeh
Within this paper we report on a lithium-ion battery with laser-structured graphite anodes, alleviating current drawbacks of lithium-ion batteries such as the reduced discharge capacity at high C-rates and the on-set of lithium-plating during fast charging. These issues are intensified at low temperatures, as reaction and diffusion kinetics decelerate, which is why a focus of the presented work lies on low temperature performance. Electrochemical impedance spectroscopy was used to show a reduction in the impedances of cells with laser-structured anodes in comparison to their conventional counterparts. The discharge capacity retention at high C-rates was enhanced by up to 27% compared to conventional cells, proving potential for high power applications. For the cells with laser-structured anodes, the on-set of lithium-plating at 0°C was observed at higher charging C-rates by analyzing the voltage relaxation after charging. At −15°C, a smaller amount of plated lithium was detected, even though lithium-plating could not be entirely avoided. Laser structuring also enabled shorter charging times, as the upper cutoff voltage was reached at a higher SOC. The results point out that laser structuring of the anode improves the fast charging capability of lithium-ion cells, especially under demanding operating conditions.

17 October 2023 in Electrochimica Acta
Verified
Journal Article
Open access
SSSandro Stock
Sandro Stock
JHJan Hagemeister
Jan Hagemeister
SGSophie Grabmann
Sophie Grabmann
JKJohannes Kriegler
Johannes Kriegler
JKJosef Keilhofer
Josef Keilhofer
RDRüdiger Daub
Rüdiger Daub

1 October 2021 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
SGSophie Grabmann
Sophie Grabmann
JKJohannes Kriegler
Johannes Kriegler
FHFelix Harst
Felix Harst
FGFlorian J. Günter
Florian J. Günter
MZMichael F. Zaeh
Michael F. Zaeh
The qualification of production systems that enable reliable and stable production processes is a major challenge in manufacturing large-format lithium-ion batteries. During cell assembly, the electrode sheets of the anode and the cathode are stacked, and are electrically contacted by a welding process. It was shown that laser beam welding employing a beam source in the green wavelength range is a promising joining approach in terms of high productivity. Therefore, the influence of the process parameters, such as the laser power, the welding speed, the pulse frequency, and the pulse duration, on the weld seam quality was investigated. Particular emphasis was placed on the mechanical strength of the weld seam. Statistically planned experiments were used to determine feasible parameter sets for welding the most common current collectors of lithium-ion battery electrodes, copper (Cu), and aluminum (Al). The influence of the individual process parameters on the tensile shear force was evaluated. Stacks of 40 metal foils were welded with a thin metal sheet in lap joint configuration. Based on an analysis of the requirements for minimum mechanical seam strengths, this study confirms that laser beam welding using a green high-power disk source is an auspicious process for the internal contacting of lithium-ion batteries.

1 October 2021 in Electrochimica Acta
Verified
Journal Article
Closed access
LHLucas Hille
Lucas Hille
LXLingji Xu
Lingji Xu
JKJosef Keilhofer
Josef Keilhofer
SSSandro Stock
Sandro Stock
JKJohannes Kriegler
Johannes Kriegler
MZMichael F. Zaeh
Michael F. Zaeh

10 December 2022 in Journal of Power Sources
Verified
Journal Article
Open access
LHLucas Hille
Lucas Hille
MNMarc P. Noecker
Marc P. Noecker
BKByeongwang Ko
Byeongwang Ko
JKJohannes Kriegler
Johannes Kriegler
JKJosef Keilhofer
Josef Keilhofer
MZMichael F. Zaeh
Michael F. Zaeh

23 May 2022 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
LHLucas Hille
Lucas Hille
HTHans-Christoph Toepper
Hans-Christoph Toepper
CSCharlotte Schriever
Charlotte Schriever
JKJohannes Kriegler
Johannes Kriegler
JKJosef Keilhofer
Josef Keilhofer
MZMichael F. Zaeh
Michael F. Zaeh
In this study, the influence of calendering and laser structuring on the pore structure and electrochemical performance of electrodes is reported. Graphite anodes of varying bulk porosity were micro structured with pulsed laser radiation. Using scanning electron microscopy and energy-dispersive X-ray spectroscopy, laser structuring was found to release superficial pore clogging caused by calendering and to result in binder agglomerates on the electrode surfaces. Structured electrodes showed higher porosities than their unstructured counterparts due to a thickness increase and material removal, but no significant change in the pore size distribution was detected using mercury intrusion porosimetry. Electrochemical impedance spectra of symmetric battery cells revealed increasing ionic resistances and tortuosities for decreasing electrode porosities. Laser structuring significantly reduced the underlying lithium-ion diffusion limitations at all porosity levels. In a discharge rate test, performance deteriorations at high currents were found to be amplified by calendering and could be diminished by electrode structuring. The performance improvements by laser structuring moved towards lower C-rates for stronger compressed anodes. Despite their growth in thickness and porosity, laser structured graphite anodes showed a higher volumetric energy density at high currents than unstructured electrodes, which demonstrates the potential of electrode structuring for highly compressed anodes.