Zhijian Shen

Zhijian Shen

Auto-generated profile, based on publicly available information

Zhijian Shen

School of Information Science and Technology, ShanghaiTech University, Shanghai, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2022 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JHJian Huang
Jian Huang
ZSZhijian Shen
Zhijian Shen
ZWZongti Wang
Zongti Wang
ZZZhiqi Zhou
Zhiqi Zhou
ZWZiyu Wang
Ziyu Wang
BCBaile Chen
Baile Chen
High-speed photodetectors operating at mid-wave infrared are crucial for free-space optical communication and frequency comb spectroscopy. In this letter, we report a high-speed mid-wave infrared uni-traveling carrier photodiode based on InAs/InAsSb type-II superlattice at room temperature for the first time. The device exhibits a cut-off wavelength of around 5.5 $\mu \text{m}$ at room temperature. The responsivity of the device is about 0.6 A/W (at 4.5 $\mu \text{m}$ ) under −1 V at room temperature. The frequency response of the device is characterized by an optical parametric amplification system generating mid-infrared femtosecond pulses. A device with a 20 $\mu \text{m}$ diameter has a 3-dB bandwidth of 12.8 GHz at −4 V. These promising results suggest that the device could be potential candidates to be employed in the emerging high-speed MWIR applications.

29 October 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
ZSZhijian Shen
Zhijian Shen
ZDZhuo Deng
Zhuo Deng
XZXuyi Zhao
Xuyi Zhao
JHJian Huang
Jian Huang
LYLu Yao
Lu Yao
BCBaile Chen
Baile Chen
In this paper, a long-wave infrared InAs/GaAs sub-monolayer quantum dot quantum cascade photodetector (SML QD-QCD) grown on GaAs substrate is demonstrated. Temperature- and excitation-dependent photoluminescence measurements are used to study the optical properties of the quantum dot active region, which reveal energetically hybrid ground states between the InAs quantum dot and InGaAs quantum well due to the possible inter-mixing of In and Ga atoms during growth process. The device covers a spectral region from 6.5 to 9 μm. At 77 K, a peak responsivity of 7.5 mA/W is found at 8.3 μm (0 V), and a zero-bias differential-resistance-area (R0A) product of 9008 Ωcm2 is obtained. The white noise-limited detectivity is 6.5×109 ${cm \cdot Hz^{1/2}/W}$ . These results encourage the SML QD-QCD as a strong competitor for long-wave infrared imaging applications that require normal incidence and low power dissipation.

22 February 2021 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
ZSZhijian Shen
Zhijian Shen
ZDZhuo Deng
Zhuo Deng
XZXuyi Zhao
Xuyi Zhao
JHJian Huang
Jian Huang
CCChunfang Cao
Chunfang Cao
BCBaile Chen
Baile Chen
A germanium (Ge) or germanium-on-silicon (Ge-on-Si) substrate is an attractive yet not well-studied platform for developing long-wave infrared photonics devices such as lasers and photodetectors. In this paper, we report a long-wave infrared quantum cascade photodetector grown on the Ge substrate with a submonolayer InAs/GaAs quantum dot as the infrared absorber. At 77 K under zero bias, the detector shows a differential-resistance area ( R 0 A ) product of 298.7 Ω·cm2. The normal-incident peak responsivity is 0.56 mA/W observed at 8.3 μm, corresponding to a Johnson noise limited detectivity of 1.5 × 108 cm·Hz1/2/W. In addition, the effect of the periodic stage number of active regions on device's performance is discussed in detail. The device characteristics presented in this work demonstrate the potential for monolithic integration of this quantum cascade detector with the Ge or Ge-on-Si substrate for large-scale, cost-effective sensing and imaging applications.

7 November 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JHJian Huang
Jian Huang
ZDZhecheng Dai
Zhecheng Dai
ZSZhijian Shen
Zhijian Shen
ZWZongti Wang
Zongti Wang
ZZZhiqi Zhou
Zhiqi Zhou
BCBaile Chen
Baile Chen
In this article, we studied two high-speed mid-wave infrared InAs/InAsSb type-II superlattice (T2SL) uni-traveling carrier (UTC) photodetectors (PDs) with different graded p-doping profiles in the absorber. It is found that the UTC device with higher absorber p-doping (hereafter referred to as Device A) has a larger 3-dB bandwidth than that of the device with lower absorber p-doping (hereafter referred to as Device B). However, Device A shows a higher dark current and lower responsivity performance than Device B. The peak responsivity of Devices A and B is about 0.9 and 1.2 A/W, respectively, under $-$ 1 V at room temperature. The performance comparisons of both devices are explored in detail. These results could contribute a further step toward developing high-speed InAs/InAsSb T2SL PDs.

9 October 2023 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
ZSZhijian Shen
Zhijian Shen
JYJinshan Yao
Jinshan Yao
JHJian Huang
Jian Huang
ZDZhecheng Dai
Zhecheng Dai
LWLuyu Wang
Luyu Wang
BCBaile Chen
Baile Chen
Recently, there has been a growing demand for high-speed mid-wave infrared (MWIR) photodetectors (PDs) driven by the emergence of new fields, such as free-space communication and frequency comb spectroscopy. In this study, we investigated a high-speed InAs/GaSb type-II superlattice (T2SL) MWIR uni-traveling carrier (UTC) PD with relatively low dark current and high responsivity. We also perform an inductive peaked dewar packaging on the PD to be user-friendly and allow cryogenic operation. The original on-wafer PD shows a dark current density of 54.05 A/cm 2 at 300 K, along with a responsivity exceeding 0.36 A/W at 4.5 μm and a 3-dB bandwidth of 3.83 GHz at −5 V bias. The inductive-peaked device in dewar packaging demonstrates a dark current density of 1.65×10 −5 A/cm 2 at 77 K, and a responsivity of 0.39 A/W at 4 μm, and a 3-dB bandwidth of 5.29 GHz.

9 December 2019 in Advances in Applied Ceramics: Structural, Functional and Bioceramics
Verified
Journal Article
Closed access
ZWZhe Bao Wu
Zhe Bao Wu
ASAndi Shi
Andi Shi
QLQian Liang
Qian Liang
TLTiantao Liu
Tiantao Liu
JHJiangyong Huang
Jiangyong Huang
ZSZhijian Shen
Zhijian Shen
This case represents aesthetic restoration by full-contour monolithic zirconia crowns without porcelain veneer via a completely digital workflow. Virtual prostheses were designed following intraoral scanning and digital smile design (DSD) process. Polymethyl methacrylate (PMMA)-based provisional restorations were used and adjusted as guide for aesthetic and occlusal evaluation. Definite self-glazed zirconia crowns were delivered by superimposing the abutment teeth and modified temporary crowns in situ. Such novel zirconia crowns were formed by net-shape manufacturing process following biogeneric copying of the provisional crowns. The restorations represented functionally tailored hierarchical structures exhibiting superior smoothness on the surface without conventional manual work of grinding, polishing and veneering. The application of full-contour monolithic zirconia restorations in the anterior region via a completely digital workflow indicates a reliable treatment option.