In this article, we studied two high-speed mid-wave infrared InAs/InAsSb type-II superlattice (T2SL) uni-traveling carrier (UTC) photodetectors (PDs) with different graded p-doping profiles in the absorber. It is found that the UTC device with higher absorber p-doping (hereafter referred to as Device A) has a larger 3-dB bandwidth than that of the device with lower absorber p-doping (hereafter referred to as Device B). However, Device A shows a higher dark current and lower responsivity performance than Device B. The peak responsivity of Devices A and B is about 0.9 and 1.2 A/W, respectively, under $-$ 1 V at room temperature. The performance comparisons of both devices are explored in detail. These results could contribute a further step toward developing high-speed InAs/InAsSb T2SL PDs.
Recently, there has been a growing demand for high-speed mid-wave infrared (MWIR) photodetectors (PDs) driven by the emergence of new fields, such as free-space communication and frequency comb spectroscopy. In this study, we investigated a high-speed InAs/GaSb type-II superlattice (T2SL) MWIR uni-traveling carrier (UTC) PD with relatively low dark current and high responsivity. We also perform an inductive peaked dewar packaging on the PD to be user-friendly and allow cryogenic operation. The original on-wafer PD shows a dark current density of 54.05 A/cm 2 at 300 K, along with a responsivity exceeding 0.36 A/W at 4.5 μm and a 3-dB bandwidth of 3.83 GHz at −5 V bias. The inductive-peaked device in dewar packaging demonstrates a dark current density of 1.65×10 −5 A/cm 2 at 77 K, and a responsivity of 0.39 A/W at 4 μm, and a 3-dB bandwidth of 5.29 GHz.
13 January 2026 in Journal of Lightwave Technology
Despite significant progress, high-speed mid-wave infrared (MWIR) photodetectors (PDs) still struggle to simultaneously achieve high bandwidth, high responsivity, and low dark current, limiting their suitability for practical applications. Here, we demonstrate an MWIR InAs/InAsSb type-II superlattice (T2SL) uni-traveling carrier (UTC) photodetector designed for high-speed operation. At room temperature and under a bias of $-$1 V, the device exhibits a dark current density of 2.75 A/cm $^{2}$, a peak responsivity of $\sim$0.8 A/W at 4 $\mu$ m, and a 3-dB bandwidth of 3.76 GHz. Increasing the bias to $-$2.5 V extends the 3-dB bandwidth to 7.21 GHz. Comprehensive modeling is performed to quantitatively evaluate the device performance. As aparse proof of concept, the packaged detector was integrated into a free-space optical communication (FSOC) system, achieving a data rate of 6 Gbaud with a clearly open non-return-to-zero (NRZ) eye diagram.
21 April 2025 in IEEE Transactions on Electron Devices
We report on the demonstration of an InGaP/AlGaAs heterojunction avalanche photodiode (APD) with an aluminum composition of 0.8, optimized for high-speed visible-light detection. The APD achieves a 3-dB bandwidth of 2.25 GHz at a multiplication gain of 72, corresponding to a gain–bandwidth product (GBP) of 162 GHz. It exhibits low dark current, low excess noise, and high multiplication gain, highlighting its suitability for high-performance optical applications. To showcase its potential, we integrated the APD into a visible-light communication system with a GaN micro-LED transmitter, achieving a data rate exceeding 1063 Mb/s. These findings highlight the promise of InGaP/AlGaAs APDs for advancing high-speed visible-light communication technologies.
The mid-infrared (MIR) free-space optical (FSO) transmission systems based on quantum cascade laser (QCL) have attracted substantial attention. Nevertheless, a major limitation persists at the receiver side, which remains dominated by mercury cadmium telluride (MCT) detectors due to the lack of competitive alternatives. This prevalent reliance is particularly problematic in the mid-wave infrared (MWIR) band, where MCT detectors are fundamentally constrained by limited modulation bandwidth and cooling requirements. This study explores the potential of MWIR FSO transmission that leverages an MWIR uni-traveling carrier photodiode (UTC-PD) to attain high-speed communication. We present an experimental demonstration of an MWIR FSO link at 4.65 μm, combining a directly-modulated (DM) QCL with an uncooled UTC-PD detector based on InAs/InAsSb type-II superlattices. A transmission data rate of up to 14 Gb/s over a 31-m optical path length (OPL) is successfully achieved, demonstrating superior performance compared to a benchmark commercial MCT. Our findings suggest that the UTC-PD-based MIR FSO receiver offers a promising solution towards the next generation of optical wireless communication networks.