Rongxing Yi

Rongxing Yi

Auto-generated profile, based on publicly available information

Rongxing Yi

Forschungszentrum Jülich GmbH, Institute of Fusion Energy and Nuclear Waste Management—Plasma Physics, Partner of the Trilaterial Euregio Cluster (TEC), 52425 Jülich, Germany

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 December 2021 in Nuclear Fusion
Verified
Journal Article
Open access
SBS. Brezɩnsek
S. Brezɩnsek
CDC.P. Dhard
C.P. Dhard
MJM. Jakubowski
M. Jakubowski
RKR. König
R. König
SMS. Masuzaki
S. Masuzaki
TTthe W7-X Team
the W7-X Team
W7-X completed its plasma operation in hydrogen with island divertor and inertially cooled test divertor unit (TDU) made of graphite. A substantial set of plasma-facing components (PFCs), including in particular marker target elements, were extracted from the W7-X vessel and analysed post-mortem. The analysis provided key information about underlying plasma–surface interactions (PSI) processes, namely erosion, transport, and deposition as well as fuel retention in the graphite components. The net carbon (C) erosion and deposition distribution on the horizontal target (HT) and vertical target (VT) plates were quantified and related to the plasma time in standard divertor configuration with edge transform ι = 5/5, the dominant magnetic configuration of the two operational phases (OP) with TDU. The operation resulted in integrated high net C erosion rate of 2.8 mg s−1 in OP1.2B over 4809 plasma seconds. Boronisations reduced the net erosion on the HT by about a factor 5.4 with respect to OP1.2A owing to the suppression of oxygen (O). In the case of the VT, high peak net C erosion of 11 μm at the strike line was measured during OP1.2B which converts to 2.5 nm s−1 or 1.4 mg s−1 when related to the exposed area of the target plate and the operational time in standard divertor configuration. PSI modelling with ERO2.0 and WallDYN-3D is applied in an interpretative manner and reproduces the net C erosion and deposition pattern at the target plates determined by different post-mortem analysis techniques. This includes also the 13C tracer deposition from the last experiment of OP1.2B with local 13CH4 injection through a magnetic island in one half module. The experimental findings are used to predict the C erosion, transport, and deposition in the next campaigns aiming in long-pulse operation up to 1800 s and utilising the actively cooled carbon-fibre composite (CFC) divertor currently being installed. The CFC divertor has the same geometrical design as the TDU and extrapolation depends mainly on the applied plasma boundary. Extrapolation from campaign averaged information obtained in OP1.2B reveals a net erosion of 7.6 g per 1800 s for a typical W7-X attached divertor plasma in hydrogen.

25 June 2024 in Nuclear Fusion
Verified
Journal Article
Open access
MZM. Zlobinski
M. Zlobinski
GSGennady Sergienko
Gennady Sergienko
IJIonut Jepu
Ionut Jepu
CRC. Rowley
C. Rowley
AWAnna Marie Widdowson
Anna Marie Widdowson
JLJari Likonen
Jari Likonen
The paper reports the first demonstration of in situ laser-induced desorption — quadrupole mass spectrometry (LID-QMS) application on a large scale fusion device performed in summer 2023. LID-QMS allows direct measurements of the fuel inventory of plasma facing components without retrieving them from the fusion device. The diagnostic desorbs the retained gases by heating a 3 mm diameter spot on the wall using a 1 ms long laser pulse and detects them by QMS. Thus, it can measure the gas content at any wall position accessible to the laser. The successful LID-QMS application in laboratory scale and on medium size fusion devices has now been demonstrated on the larger scale and it is already foreseen as tritium monitor diagnostic in ITER. This in situ diagnostic gives direct access to retention physics on a short timescale instead of campaign-integrated measurements and can assess the space-resolvedefficacy of detritation methods. LID-QMS can be applied on many materials: on Be deposits like in JET, B deposits like in TEXTOR, C based materials or on bulk-W.

8 December 2020 in Nuclear Fusion
Verified
Journal Article
Closed access
DZD. Zhao
D. Zhao
RYR. Yi
R. Yi
AEA. Eksaeva
A. Eksaeva
JOJ. Oelmann
J. Oelmann
SBSebastijan Brezinsek
Sebastijan Brezinsek
TTthe W7-X team
the W7-X team
A set of dedicated marker samples consisting of fine-grain graphite as substrate, an interlayer of 0.2–0.4 μm molybdenum (Mo) employed as marker, and a 5–10 μm thick carbon (C) marker layer on top were installed in Wendelstein 7-X (W7-X) to investigate locally the C erosion and deposition. In this study, a set of five individual marker tiles, installed in a vertical divertor element of the test divertor unit in half-module 50, and exposed to about 40 min of plasma predominant in the standard magnetic divertor configuration in the first year of divertor operation in W7-X (OP1.2A), were retrieved from the vessel for post-mortem analysis. Picosecond laser induced breakdown spectroscopy (ps-LIBS) was applied on these marker tiles in order to determine the local erosion/deposition pattern caused by plasma impact. The general erosion/deposition pattern on the vertical target element was studied with the aid of depth-profiling by Mo line emission due to ps-LIBS with the number of applied laser pulses (355 nm, 2.3 J cm−2, 35 ps) at one probing location. Several potential asymmetry factors which avoid a perfect layer-by-layer ablation process in the laser ablations are proposed and discussed when a rough layered structure sample with a rough surface is analysed by the ps-LIBS technique. Thereby, a simulation model was developed to correct the measurement error of the ps-LIBS method caused by the non-perfect rectangle profile of the applied laser beam. The depth resolution of the applied ps-LIBS system was determined by quantification of the laser ablation rates of the different layers and the C substrate which were measured utilising profilometry and cross comparison with the thicknesses of the C and Mo marker layers determined by a combined focused ion beam and scanning electron microscopy technique. For the first time, the erosion/deposition pattern on the vertical target was mapped and quantified by ps-LIBS technique. A relatively wide net erosion zone with a poloidal extend of about 200 mm was identified which can be correlated to the main particle interaction zone at the magnetic strike-line of the dominantly applied standard magnetic divertor configuration. At the position of peak erosion, not only 7.6 × 1019 C atoms/cm2 but also 2 × 1018 Mo atoms/cm2 which results can be extrapolated to total 15 × 1019 C atoms/cm2, were eroded due to plasma fuel particle (H, He) and impurity (O, C) ion impact.

23 October 2025 in Nuclear Materials and Energy
Verified
Journal Article
Open access
RYRongxing Yi
Rongxing Yi
RRRahul Rayaprolu
Rahul Rayaprolu
JLJari Likonen
Jari Likonen
Salvatore AlmavivaSalvatore Almaviva
Salvatore Almaviva
IJIonut Jepu
Ionut Jepu
SBSebastijan Brezinsek
Sebastijan Brezinsek

22 March 2018 in Journal of Analytical Atomic Spectrometry
Verified
Journal Article
Closed access
PDF file
MWMenghan Wang
Menghan Wang
MZMengjie Zhao
Mengjie Zhao
SYShuai Ye
Shuai Ye
MZMing Zhu
Ming Zhu
RYRongxing Yi
Rongxing Yi
Junle QuJunle Qu
Junle Qu
It is essential to determine the elemental composition of doped functional materials, particularly for nanometer scale semiconductors, to guide synthesis and interpret physical phenomena. This study applied laser induced breakdown spectroscopy (LIBS) for elemental analysis of halides in perovskite type quantum dots, i.e., CsPbX3 nanocrystals (NCs). The optimum LIBS delay time and laser energy were experimentally determined, and small quantities of CsPbX3 NCs (μg) with different Cl/Br ratios and different photoluminescence (PL) properties were measured. Coefficients to correlate weight and LIBS emission intensity ratios for Cl and Br were experimentally determined from CuBr2/CaCl2 mixtures. The measured Cl/Br weight ratios correspond to NC PL emission wavelengths and the supplied amount of PbCl2 precursor. The proposed LIBS approach showed better sensitivity and stability than electron dispersive spectroscopy. Ideal detection accuracy and precision could be realized using LIBS, requiring only trace amounts of NC samples and simple pretreatment processes, with NC integrity retained until the test.

28 October 2025 in Nuclear Fusion
Verified
Journal Article
Open access
AWAnna Marie Widdowson
Anna Marie Widdowson
SBSebastijan Brezinsek
Sebastijan Brezinsek
TDT. Dittmar
T. Dittmar
DDD. Douai
D. Douai
RFR. Felton
R. Felton
ETEurofusion Tokamak Exploitation Team
Eurofusion Tokamak Exploitation Team
Tritium inventory build-up is a safety and economic issue for next step fusion devices and power plants. JET with a beryllium wall and tungsten divertor brings a unique contribution on fuel retention and recovery in a metallic device, as it has operated with deuterium, tritium and deuterium–tritium (DT) plasmas. This paper documents the JET fuel retention programme and results focusing on the tritium, DT campaigns and tritium clean-up in 2023. In addition specific experimental details are presented in order to provide lessons learned for fuel retention and inventory assessment procedures for regulators and operators of future fusion devices. Fuel retention results from gas balance and Laser-Induced Desorption with gas detection using Quadrupole Mass Spectrometers (LID-QMS) are discussed. Gas balance has shown that there is no significant isotopic dependence of in-vessel global fuel retention, however a faster decrease in outgassing rate has been observed with increasing mass, likely associated with the difference in concentration and depth profile of tritium and deuterium. LID-QMS data has provided new local in-vessel fuel retention data demonstrating capability for measuring fuel retention, monitoring changes in fuel retention during an operating period as well as providing direct measurement of increased near-surface fuel concentration due to diffusion of hydrogen isotopes to the surface at elevated baking temperature and removal of fuel by inner strike point heating.