Praseodymium doped cerium oxide (PCO) shows mixed ionic and electronic conducting (MIEC) characteristics at relatively high pO2 (e.g. air) and enhanced oxygen storage capacity (OSC) resulting from the ready reduction of Pr to its trivalent state. These features are important in applications such as solid oxide fuel cell (SOFC) cathodes and permeation membranes, oxygen buffers in three-way catalysts, and gas sensors. In this proceedings article, we present an overview of our current and past efforts towards the electrical, chemical, mechanical, and optical characterization of PCO.
24 May 2024 in Journal of the American Ceramic Society
Vanadium dioxide (VO2) undergoes a metal–insulator phase transition at ∼70 °C and has attracted substantial interest for potential applications in electronics, including those in neuromorphic computing. The vanadium–oxygen system has a rather complicated phase diagram, and controlling the stoichiometry and the phase of thin films of vanadium oxides is a well-known challenge. We explore the novel combination of two methods of VO2 thin film deposition using off-axis RF magnetron sputtering on (100)- and (111)-oriented yttria-stabilized zirconia (YSZ) substrates: reactive sputtering of vanadium in an oxygen environment and sputtering of vanadium metal followed by oxidation to VO2. Interestingly, the reactive sputtering process on both substrate orientations yields the metastable semiconducting VO2 (B) phase, which is structurally stabilized by the YSZ surface. The metal sputtering and oxidation process on YSZ produces mainly the equilibrium monoclinic (or M1) phase of VO2 that exhibits a metal–insulator transition. Using this method, we obtained thin films of (010)-textured polycrystalline VO2 (M1) that show a metal–insulator transition with an on/off ratio larger than 1000.
Lattice-core sandwich structure metamaterials are lightweight alternatives to monolithic materials that can present better mechanical, thermal, and energy dampening performance. Manufacturing lattice metamaterials to follow curved surfaces can pose a challenge, as the lattices rely on their geometric orientation to the substrate for their mechanical properties. This work rationally designed a lattice structure where the surface is broken up into “petals” connected to the underlying lattice, which localizes the petals’ impact response. This design opens a pathway for implementation of lattice-core sandwich structures onto complex surface geometries. These petal structures were evaluated for their energy absorption efficiency experimentally by utilizing pressure waves generated with nanosecond lasers and computationally via finite element modeling. The lattice structures exhibited a two-orders-of-magnitude decrease in transmitted pressure compared to their constituent steel at equivalent mass. Furthermore, localizing energy absorption into petal structures provided a 44% reduction in peak load compared to a continuous “single-petal” design.
To identify promising metal oxides for thermochemical water-splitting, we propose a workflow involving defect machine learning model training, high-throughput computational screening, material down-selection, and experimental validation.