Wenjie Zhu

Wenjie Zhu

Auto-generated profile, based on publicly available information

Wenjie Zhu

School of Electrical Engineering and Automation, Anhui University, Hefei, China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 October 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WZWenjie Zhu
Wenjie Zhu
CCChangsong Chen
Changsong Chen
SDShanxu Duan
Shanxu Duan
TWTao Wang
Tao Wang
PLPeng Liu
Peng Liu
The three-level Vienna rectifier is an attractive topology for power factor correction applications. However, for practical high frequency applications, the nonlinearity caused by snubber circuit and parasitic capacitance of Vienna rectifier's switching device will distort input current. This paper proposes a carrier-based discontinuous space-vector modulation (CB-DSVM) method with varying clamped area for Vienna rectifier in high switching frequency applications. The equivalent circuit of Vienna rectifier considering the nonlinear factors is built and the effect of pulse shaping around current zero-crossing point is investigated. The voltage errors caused by the nonlinearity of switching device will distort terminal voltage, which mainly appears at the zero-crossing time. A discontinuous space vector modulation (DSVM) method with the fixed clamped area around the zero-crossing point is proposed to reduce the voltage errors and then the simplified CB-DSVM method with varying clamped area by adding a clamped factor to the judging conditions is further studied, which will reduce low-order harmonics of the CB-DSVM method. Simulations and experiments are carried out in a 600 W Vienna rectifier platform, which demonstrates the validity of the proposed method. Compared with the CB-SVM method, the proposed CB-DSVM method with varying clamped area has comparative neutral-point voltage balancing ability and better input current quality.

10 November 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HLHaoran Li
Haoran Li
SWShengdong Wang
Shengdong Wang
ZZZhiliang Zhang
Zhiliang Zhang
JZJingfei Zhang
Jingfei Zhang
WZWenjie Zhu
Wenjie Zhu
Cungang HuCungang Hu
Cungang Hu
Conventional pulse frequency modulation is typically adopted in the reverse LLC converter resulting in a low voltage gain. The output bus voltage may be lower than peak grid voltage, so that the buck-type inverter cannot output 220 Vac and poses series challenge to achieve bidirectional charger operation. A bidirectional synchronous/asynchronous rectifier control is proposed for wide battery voltage applications in the LLC converter. In the forward mode, a simplified model is built to calculate the synchronous rectifier (SR) on-time and achieve high efficiency by using a two-order function. In the reverse mode, the turn-on instants of primary side and secondary side power devices are controlled with a delay angle to obtain high voltage gain and high efficiency. A 6.6-kW silicon carbide bidirectional LLC charger was built. With the proposed SR control, the forward LLC efficiency improves 0.2% compared with the conventional SR method. The reverse LLC voltage gain is up to 1.33 so that the charger can output 220 Vac in the full battery voltage range of 200–500 V.

16 November 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HLHaoran Li
Haoran Li
SWShengdong Wang
Shengdong Wang
ZZZhiliang Zhang
Zhiliang Zhang
JZJingfei Zhang
Jingfei Zhang
WZWenjie Zhu
Wenjie Zhu
Cungang HuCungang Hu
Cungang Hu
Conventional digital LLC synchronous rectifier (SR) control typically uses detection circuits to sense the drain-source voltage of SR MOSFET in low output voltage applications, or gives SR duty cycle only considering the switching frequency in the microcontroller. They are difficult to be applied to the applications of 700-V high voltage and 6.6-kW high power directly due to the high dv / dt and large SR duty cycle variations, which poses serious challenge for SRs control. A bidirectional impedance-based SR driving scheme is presented for high-voltage SiC LLC converter. Based on the LLC equivalent impedance, mathematical models are built to calculate the SR on-time in the forward and reverse modes, which can be tuned timely when the switching frequency and load vary. Thus, both bidirectional LLC performance with high efficiency and high immunity to the switching noise can be achieved without adding auxiliary circuits. A prototype of 300-kHz 6.6-kW SiC bidirectional LLC charger was built. Compared to the conventional SR method, the LLC efficiencies improve 0.3% in the forward and reverse modes at full load by using the proposed SR driving scheme.

10 October 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
TWTao Wang
Tao Wang
CCChangsong Chen
Changsong Chen
PLPeng Liu
Peng Liu
WZWenjie Zhu
Wenjie Zhu
SDShanxu Duan
Shanxu Duan

6 February 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HLHaoran Li
Haoran Li
Cungang HuCungang Hu
Cungang Hu
CCChaohui Cui
Chaohui Cui
JYJuan Yan
Juan Yan
WZWenjie Zhu
Wenjie Zhu
DHDonald Grahame Holmes
Donald Grahame Holmes
Conventional LLC synchronous rectifier (SR) schemes use detection circuits to sense the signals of voltage or current. But it typically operates below 500 kHz, which is unsuitable for high-frequency applications as it may lose large SR duty cycle caused by high dv/dt and GaN devices usage. To address the serious challenge, a digital SR control using extended harmonics impedance model is proposed for GaN LLC converters. By building the impedance model, the SR on-time is calculated accurately in the microcontroller. It not only minimizes the on-time of SR body diode with high precision, but also owns high immunity. A 650-kHz 1.5-kW GaN LLC converter was built. With the output of 28 V/53.5 A, the efficiency is as high as 98.1% at 1.5 kW by using the proposed SR. The power density is also up to 524 W/in 3 . Compared to the conventional SR, the efficiency improves 1.6% at full load.

30 May 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JJJunsong Jiang
Junsong Jiang
XTXi Tang
Xi Tang
Kun TanKun Tan
Kun Tan
ZHZhihao Hu
Zhihao Hu
MTMohan Tian
Mohan Tian
Wenping CaoWenping Cao
Wenping Cao
Dynamic threshold voltage shifts (DTVS) in silicon carbide (SiC) MOSFETs are investigated using an ultrafast characterization method that incorporates nanosecond-range switching. A positive gate bias causes a positive DTVS and a negative gate bias causes a negative DTVS, which is observed within a timescale range of 40 ns–1 s. At a gate bias of $-$ 10 V, the negative DTVS can reach approximately $-$ 4 V, which changes the threshold voltage from positive to negative. A mechanism involving carrier trapping at/near the SiO $_{\text{2}}$ /SiC interface is proposed. Then, the impact of DTVS on dynamic behavior is evaluated by a double-pulse test (DPT) under different OFF-state gate biases ( V $_{\text{GS,OFF}}$ ). A negative DTVS causes the channel turn-on earlier, increasing the current overshoot ( I $_{\text{OS}}$ ) during the turn-on process. As V $_{\text{GS,OFF}}$ decreases from 0 to $-$ 10 V, the turn-on loss ( E $_{\text{ON}}$ ) increases by 11.2% at a load current of 10 A. Moreover, the E $_{\text{ON}}$ changes from an increase to a decrease when the turn-on gate resistance ( R $_{\text{G,ON}}$ ) increases from 10 to 50 $\Omega$ . Therefore, for a specific gate driving condition, an optimized R $_{\text{G,ON}}$ can be chosen to compromise the DTVS-induced E $_{\text{ON}}$ change.