9 September 2020 in IEEE Transactions on Magnetics
The magnetic fluid seal is widely used in the high-speed mechanical devices. And the temperature of the seal increases with the viscous heating under the high shearing rate in the magnetic fluid. However, the influence of the temperature on the sealing performance has not been studied quantitatively in the available research. In this paper, the change rule of magnetic fluid temperature and the influence on the sealing performance is researched through the simulation and experiment methods. The thermal field simulation is conducted with the heat generation in the fluid. To calculate the decrease of the magnetic properties quantitatively, the magnetization curves under different temperatures are measured to carry out the relationship between the saturation magnetization and temperature. Based on the magnetization curve result, the two-phase flow between air and magnetic fluid is solved under different shaft rotation speeds with the influence of temperature change. Besides, the sealing experiment is conducted with the highest rotation speed of 8000 rpm. The result of simulation and experiment show good consistency, the sealing capacity decreases with the rise of rotation speed.
1 March 2018 in Computers & Industrial Engineering
1 July 2004 in Journal of Materials Science
24 January 2020 in IEEE Access
Many systems are required to execute a series of missions with a finite break between any two adjacent missions. In order to improve the reliability of the system completing the next mission successfully, it is necessary to perform maintenance actions on the components considering limited maintenance resources. A novel idea to solve the problem of selective maintenance for a series-parallel system is proposed in this paper. This problem consists in finding the best choice of maintenance actions on a multi-component system by maximizing the system reliability under limited resources. With the increased number of components in the system, the possible combinations of selective maintenance increase exponentially, which raises the difficulty of the problem. For better solution of the problem, from the perspective of maintenance benefit, we develop a selective maintenance policy under maintenance priority of components. Finally, numerical example of a series-parallel system is given to illustrate the proposed method and verify the correctness and accuracy of the method.
23 June 2025 in Asia-Pacific Journal of Operational Research