In this paper, a wideband aperture-coupled stacked-patch antenna (ACSP) on a flexible material for wireless applications at WR-08 band is presented. It is shown that conventional designs of ACSP fail to achieve a large bandwidth at this frequency range and a novel design methodology is proposed. We first propose a broadband impedance matching between the input port and the slot aperture based on two-section broadband distributed network (TWBDN). We also propose a TWBDN matched stack patch network (TMSP) based on constant VSWR circles to attain broadband matching between the slot aperture and patches in an ACSP. To facilitate the measurements, a novel low-loss transition from a ground-signal-ground (GSG) port to feedline is proposed. The proposed structure suppresses surface waves induced in the WR-08 band by placing via arrays around the feedline which largely reduces unwanted resonance modes, thereby leading to uniformly high radiation efficiency across the band. The measured results of the fabricated antenna closely follow the simulations and a measured peak gain of 7.95 dBi and S11≤ -10 dB across a wide frequency range from 90- to 128.5-GHz is achieved.
This paper provides an overview of broadband terahertz antenna elements and arrays for integrated communication systems. The fundamental challenges of integrated on-chip and off-chip antenna design, the trade-offs between performance metrics, and the impact of interface between the chip and off-chip antennas are studied in detail. The limitations and benefits of various interface technologies are discussed. The deployment of printed circuit boards (PCB) and flexible printed circuits (FPC) technologies for implementation of efficient broadband antennas is compared against on-chip counterparts. As a proof of concept, an off-chip antenna for the 91–134 GHz is presented.
1 December 2004 in International Journal of Non-Linear Mechanics
This paper presents the design and experimental of a single and array Quasi Yagi-Uda antenna at 28 GHz. The proposed antenna is implemented on MFLEX flexible material with a thickness of 0.120mm for 5G applications. A wideband antenna operates within 24 to 29.5 GHz and exhibits almost the same end-fire radiation pattern over bandwidth with an average gain of 6.2dBi and 10.15dBi for single and array antennas. The flexible antenna was tested under bending conditions and results showed excellent performance at the 28GHz region.
The 5G is emerging as a next-generation communication technology and it is anticipated to provide of massive data rate and very low latency to the consumers. Meanwhile, with the rise of the 5G, it is predicted that wearable and flexible devices such as antenna will be the remarkable end node in the Millimeter Wave frequency bands. This paper represents a compact and low-profile dual-polarized cavity slot antenna in single and array configurations with a thickness of 202 um. In the measurement, the proposed antennas show a −10dB reflection coefficient with a wide bandwidth at the operating frequency. Which covers 27.55–28.5 GHz and 27.1–28.75 GHz for the single and array element, respectively. The measured maximum gain is 5.5 dBi at 28 GHz for the single element and 9.1 dBi at 27.5 GHz for the array element. Moreover, the isolation between two feeds of the dual-polarized antenna is about 30 dB and 35 dB at 28 GHz for the single and array element, respectively. All results indicate that the proposed Cavity slot antenna has broad application prospects in the next generation communication.