1 September 2020 in Journal of Manufacturing Processes
1 July 2011 in Science and Technology of Welding and Joining
The thermal or process efficiency in gas metal arc welding (GMAW) is a crucial input to numerical models of the process and requires the use of an accurate welding calorimeter. In this paper, the authors compare a liquid nitrogen calorimeter with an insulated box calorimeter for measuring the process efficiency of Fronius cold metal transfer, Lincoln surface tension transfer and RapidArc, Kemppi FastRoot and standard pulsed GMAW. All of the controlled dip transfer processes had a process efficiency of ∼85% when measured with the liquid nitrogen calorimeter. This value was slightly higher when welding in a groove and slightly lower for the RapidArc and pulsed GMAW. The efficiency measured with the insulated box calorimeter was slightly lower, but it had the advantage of a much smaller random error.
1 June 2012 in Journal of Materials Processing Technology
1 February 2006 in Journal of Materials Processing Technology
CSCelina Leal Mendes da Silva
Celina Leal Mendes da Silva
25 June 2019 in The International Journal of Advanced Manufacturing Technology
In this work, an alternative approach to prevent unidirectional grain growth in wire + arc additive manufacturing (WAAM) is proposed and assessed, by moving cyclically the torch forward and backward, likewise the welding technique known as switchback. A series of tests were planned with CMT (cold metal transfer) process to compare three wall-like build-ups, which uses different deposition patterns, namely, in one-way direction, reverse direction, and switchback. The same equivalent travel speed and number of deposited layers were kept among them. Longitudinal sections were taken to identify the grain growth behaviour. Finally, samples were removed from the walls for porosity evaluation. The results confirmed the characteristics of unidirectional grain growth, when one-way direction condition was employed, and the break of growth direction between layers, when reverse direction was used, yet a zig-zag pattern became present. Differently, the application of switchback showed no preferential or unidirectional grain growth, suggesting less anisotropy of mechanical properties. In addition, switchback reduced porosity.
20 April 2013 in The International Journal of Advanced Manufacturing Technology