22 June 2021 in IEEE Transactions on Applied Superconductivity
The engineering design of the China Fusion Engineering Test Reactor (CFETR) has been completed in 2020. A largescale R&D project for CFETR named the comprehensive research facility for fusion technology (CRAFT) was initiated in Sep. 2019. As a sub-task of the CRAFT, a superconducting experiment testing platform (Super-X for short) is planned to be constructed for evaluating the future superconducting parts performance. Its main technical parameter includes: the background field of 15 T, the dimensions of testing space of 100 × 160 × 550 mm, the field homogeneity of testing space ≥ 95%, and the maximum testing current of 100 kA. For now, the preliminary design for Super-X has been accomplished. The DC magnet provides the background magnetic field for Super-X. It is a kind of split coil that includes two symmetrical coils assemblies. The innermost diameter is about 644 mm, the outermost diameter is 2874 mm. Each coil assembly is composed of three concentric Nb 3 Sn coils. The peak field is 15.7 T and the field homogeneity reach to 98.2%. The high field coil (HFC) and medium field coil (MFC) is typically dominated by high-J c Nb 3 Sn cable-in-conduit conductor (CICC), and the low field coil (LFC) by ITER grade Nb 3 Sn CICC. This paper presents the preliminary design of the background DC magnet system (BM).
30 July 2020 in IEEE Transactions on Applied Superconductivity
The conceptual design of China fusion engineering test reactor (CFETR) is now ongoing. Its toroidal field magnets with a peak field of 15 T which require a new conductor testing facility with higher background magnetic field to test and evaluate the performance of these conductors. As part of the study of CFETR, the facility named Super X (SUPERconducting eXperiment) is planning to be constructed at ASIPP and a conceptual design activity related is going on in parallel. The background magnetic field of the facility is generated by three concentric pairs of split coils with a bore of 600mm diameter, inner coil (IC, peak field of 15.6 T), middle coil (MC, 13.3 T), and outer coil (OC, 10 T) in which IC and MC are connected in series with a nominal operating current of 7.9 KA, while OC operates at 13.5 KA. Each split pair coil is made of its own distinctive rectangular shaped cable-in-conduit conductor (CICC). The design and preliminary results of electro-magnetic optimization and structural mechanical analysis for the background magnet system are presented.
25 January 2021 in IEEE Transactions on Applied Superconductivity
The central solenoid model coil (CSMC) for China Fusion Engineering Test Reactor (CFETR) is being developed in the Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP). The maximum magnetic field is 12 T in the bore of the Nb 3 Sn coils. It has a 1.5 T/s changing rate under 47.65 kA operating current. It was designed as a hybrid superconducting magnet with Nb 3 Sn and NbTi coils to reduce cost. The detailed structure of the CSMC has been designed, it mainly including Nb 3 Sn coils, NbTi coils, preload structure, coil buffer zone, joints, supports, feeder throughs, helium pipes and pipe supports. The preload structure consisting of 15 preload beams, 30 preload rods and support plates. And a 75 MN preload force will be applied on the preload structure at room temperature. This paper describes the final design of the Central Solenoid Model Coil. And the mechanical analysis results show that the final design is reasonable and feasible.