28 February 2022 in IEEE Microwave and Wireless Components Letters
A sub-sampling PLL (SSPLL) employing an adaptive frequency-locked loop (FLL) without static power consumption is proposed in this letter. A new unlock detection mechanism and a configurable PFD are realized in the adaptive FLL. With the new unlock detection mechanism, while the FLL that contains phase detector, divider, and charge pump dissipates no power during the locked steady state, it automatically starts when external interferences disturb the locked state. The optimized dead zone in the configurable PFD ensures a rapid relocking operation. Based on the proposed adaptive FLL, the 2.4 GHz SSPLL is fabricated in a 40-nm CMOS process. It achieves −128.5 dBc/Hz at 1 MHz offset frequency and the rms jitter is 103.58 fs integrated from 10 k to 10 MHz. It consumes 1.55 mW at 1 V supply and achieves −257.8 dB FOM.
3 April 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents an analog low-power sub-sampling phase locked loop (PLL) that tackles the reference spur caused by VCO load modulation from the sub-sampling operation. A complete analysis on the binary frequency shift keying (BFSK) effect including the impact of the VCO buffer is provided, followed by practical design guide that achieves the optimum spur/jitter trade-off. The proposed sub-sampling phase detector incorporates an active primary-secondary architecture for improved isolation to suppress the load modulation. The adaptive frequency locked loop (FLL) consumes zero power in the locked state and activates itself once unlocking is detected. The sub-sampling PLL is fabricated in a 40nm CMOS process. It achieves -121.5dBc/Hz phase noise at 1MHz offset frequency and an RMS jitter of 185fs integrated from 10k to 10MHz. The power dissipation is 1.14mW at 0.95V supply with a -254.1dB figure-of-merit. The proposed phase detector results in -73dBc reference spur that is among the lowest in state-of-art works.
7 February 2025 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this brief, an all-digital spread-spectrum clock generator (AD-SSCG) is presented for low-power wide-area network (LPWAN) chirp spread spectrum application. Facing the periodic frequency hopping in chirp modulation, a gain calibration is employed in feedforward path to avoid two-point modulation (TPM) loop-gain mismatches and phase error, ensuring a precise frequency tracking. Employed with the combination of a constant slope digital-to-time converter (CS-DTC) and an multi-bit mid-rise TDC, the embedded digital loop can provide a linear sawtooth chirp modulation while keeping a good phase noise (PN) performance. Fabricated in a 40nm CMOS process, the AD-SSCG achieves a random jitter of 508fsrms, with measured PN of -111.6dBc/Hz@1MHz. The EMI reduction achieves 39.1dB (4MHz + 2000ppm depth). The prototype chip consumes 2.45mW under 1.1V supply voltage.
10 November 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a 6.8-GHz compact digital fractional-N PLL based on a pulse-shaped loop filter, enabling a loop bandwidth of $0.26f_{ref}$ to suppress the ring oscillator’s phase noise. It leverages a constant-slope DTC with range extension technique to save 50% area of the capacitor array. The embedded nonlinearity cancellation and digital offset compensation further improve the spectrum purity. Fabricated in a 28-nm CMOS process, the pulse-shaper-based PLL occupies $\text {0.025mm}^{{2}}$ core area, achieves an integrated jitter of 804 fs and −53.2 dBc fractional spur at near-integer channels with a power consumption of 5.68mW, obtaining a $\text {FoM}_{\text {Jitter-N-Area}}$ of −269.9 dB.