Sosu Kim

Sosu Kim

Auto-generated profile, based on publicly available information

Sosu Kim

Agency for Defense Development, Daejeon, Republic of Korea

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
JYJong-Min Yook
Jong-Min Yook
YKYoung-Gon Kim
Young-Gon Kim
WKWansik Kim
Wansik Kim
SKSosu Kim
Sosu Kim
JKJun Chul Kim
Jun Chul Kim
In this letter, a quasi-coaxial through-silicon-via (TSV) is presented for millimeter-wave integrated circuit (IC) packaging. The quasi-coaxial-via (Q-COV) structure in which one side ground metal is removed can minimize the interconnect length when it is mounted, in comparison to the coaxial-via (COV) structure. Simulation analysis shows that the Q-COV has similar electrical characteristics as the COV up to 100 GHz even though there is no GND on one side. To make the small signal core of the Q-COV, the silicon-core metallization process was used and a Si-interposer with Q-COVs of 50-μm core diameter was fabricated and mounted on the glass board for signal transition analysis. The measured transition loss in the mounted Si-interposer was very small, only about 0.6 dB at 100 GHz, and the return loss was more than 20 dB for the entire measured frequency band (0-110 GHz).

31 May 2022 in The Journal of Korean Institute of Electromagnetic Engineering and Science
Verified
Journal Article
Open access
PDF file
MSMihui Seo
Mihui Seo
HKHyun-Ju Kim
Hyun-Ju Kim
SKSosu Kim
Sosu Kim
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)

31 August 2022 in IEEE Access
Verified
Journal Article
Open access
SLSunwoo Lee
Sunwoo Lee
WKWansik Kim
Wansik Kim
SKSosu Kim
Sosu Kim
MKMin-Su Kim
Min-Su Kim
JKJunghyun Kim
Junghyun Kim
A new interstage matching technique is presented for design of a wide-band multi-stage amplifier using commercial 60 nm GaN-on-silicon technology in the W-band. The proposed interstage matching network is designed as a two-pole conjugated impedance matching approach for wideband characteristics using low-characteristic impedance transmission lines and an optimized microstrip-coupled line. In particular, the microstrip-coupled line provides strong resonance at the desired frequency, enabling optimal conjugate impedance matching of both edge and intermediate frequencies simultaneously. The implemented W-band three-stage amplifier using the proposed interstage matching technique exhibited a small-signal gain above 14.1 dB from 75 to 103 GHz. Also, the output power between 92-100 GHz was greater than 25 dBm, and the maximum output power at 96 GHz was 25.8 dBm. The W-band amplifier was designed with an area of 2 mm $\times1.2$ mm.

1 January 2020 in IEEE Access
Verified
Journal Article
Open access
WCWonseok Choe
Wonseok Choe
SKSosu Kim
Sosu Kim
WKWansik Kim
Wansik Kim
JJJinho Jeong
Jinho Jeong
In this paper, a W-band mixer integrated circuit (IC) with high image rejection ratio (IRR) is presented, compensating for the amplitude and phase mismatches between the I and Q channels in the image rejection mixer (IRM) using RF buffer amplifiers. It is shown by analysis and simulation that the signal coupling between the I and Q channels in the IRM can generate mismatches which can severely degrade the IRR, even though other circuit components are symmetrically designed so as not to induce mismatches. The coupling between two channels can become serious, especially in millimeter-wave IRM ICs where the circuit components are laid out in close proximity to reduce the chip size. It is also shown that poor isolation of millimeter-wave couplers can seriously degrade IRR. In this work, we employ an RF buffer amplifier at the RF port of the resistive mixer to compensate for the amplitude and phase mismatches. The designed W-band IRM IC is fabricated in a 0.1-μm GaAs pHEMT process. Measurements show that the bias tuning of the RF buffer amplifiers can minimize the mismatches and improve the IRR by up to 35 dB at RF from 91 to 95 GHz at an IF of 50 MHz. The IRM exhibits an IRR of 19.2–47.9 dB with conversion loss of 7.9–9.2 dB, which belongs to the highest IRR among the reported IRMs in the W-band.

31 May 2023 in The Journal of Korean Institute of Electromagnetic Engineering and Science
Verified
Journal Article
Open access
PDF file
MSMihui Seo
Mihui Seo
HKHyun-Ju Kim
Hyun-Ju Kim
SKSosu Kim
Sosu Kim
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)

30 April 2019 in The Journal of Korean Institute of Electromagnetic Engineering and Science
Verified
Journal Article
Open access
PDF file
HYHyung Sup Yoon
Hyung Sup Yoon
BMByoung-Gue Min
Byoung-Gue Min
SCSung-Jae Chang
Sung-Jae Chang
HJHyun-Wook Jung
Hyun-Wook Jung
JLJong Min Lee
Jong Min Lee
SKSosu Kim
Sosu Kim
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)