25 September 2018 in Nature Communications
Holes confined in quantum dots have gained considerable interest in the past few years due to their potential as spin qubits. Here we demonstrate two-axis control of a spin 3/2 qubit in natural Ge. The qubit is formed in a hut wire double quantum dot device. The Pauli spin blockade principle allowed us to demonstrate electric dipole spin resonance by applying a radio frequency electric field to one of the electrodes defining the double quantum dot. Coherent hole spin oscillations with Rabi frequencies reaching 140 MHz are demonstrated and dephasing times of 130 ns are measured. The reported results emphasize the potential of Ge as a platform for fast and electrically tunable hole spin qubit devices.
17 October 2016 in Nano Letters
Hole spins have gained considerable interest in the past few years due to their potential for fast electrically controlled qubits. Here, we study holes confined in Ge hut wires, a so-far unexplored type of nanostructure. Low-temperature magnetotransport measurements reveal a large anisotropy between the in-plane and out-of-plane g-factors of up to 18. Numerical simulations verify that this large anisotropy originates from a confined wave function of heavy-hole character. A light-hole admixture of less than 1% is estimated for the states of lowest energy, leading to a surprisingly large reduction of the out-of-plane g-factors compared with those for pure heavy holes. Given this tiny light-hole contribution, the spin lifetimes are expected to be very long, even in isotopically nonpurified samples.
27 February 2020 in Advanced Materials
Semiconductor nanowires have been playing a crucial role in the development of nanoscale devices for the realization of spin qubits, Majorana fermions, single photon emitters, nanoprocessors, etc. The monolithic growth of site‐controlled nanowires is a prerequisite toward the next generation of devices that will require addressability and scalability. Here, combining top‐down nanofabrication and bottom‐up self‐assembly, the growth of Ge wires on prepatterned Si (001) substrates with controllable position, distance, length, and structure is reported. This is achieved by a novel growth process that uses a SiGe strain‐relaxation template and can be potentially generalized to other material combinations. Transport measurements show an electrically tunable spin–orbit coupling, with a spin–orbit length similar to that of III–V materials. Also, charge sensing between quantum dots in closely spaced wires is observed, which underlines their potential for the realization of advanced quantum devices. The reported results open a path toward scalable qubit devices using nanowires on silicon.
25 October 2018 in Nano Letters
The strong atomistic spin orbit coupling of holes makes single-shot spin readout measurements difficult because it reduces the spin lifetimes. By integrating the charge sensor into a high bandwidth radio-frequency reflectometry setup we were able to demonstrate single-shot readout of a germanium quantum dot hole spin and measure the spin lifetime. Hole spin relaxation times of about 90 μs at 500 mT are reported, with a total readout visibility of about 70%. By analysing separately the spin-to-charge conversion and charge readout fidelities insight into the processes limiting the visibilities of hole spins has been obtained. The analyses suggest that high hole visibilities are feasible at realistic experimental conditions underlying the potential of hole spins for the realization of viable qubit devices.
7 March 2022 in MRS Bulletin
In situ transmission electron microscopy (TEM) is a powerful tool for advanced material characterization. It allows real-time observation of structural evolution at the atomic level while applying different stimuli such as heat. However, the validity of analysis strongly depends on the quality of the specimen, which has to be prepared by thinning the bulk material to electron transparency while maintaining the pristine properties. To address this challenge, a novel method of TEM samples preparation in plan-view geometry was elaborated based on the combination of the wedge polishing technique and an enhanced focused ion beam (FIB) workflow. It involves primary mechanical thinning of a broad sample area from the backside followed by FIB-assisted installation on the MEMS-based sample carrier. The complete step-by-step guide is provided, and the method’s concept is discussed in detail making it easy to follow and adapt for diverse equipment. The presented approach opens the world of in situ TEM heating experiments for a vast variety of fragile materials. The principle and significant advantage of the proposed method are demonstrated by new insights into the stability and thermal-induced strain relaxation of Ge Stranski–Krastanov islands on Si during in situ TEM heating. Graphical abstract
17 April 2023 in Advanced Electronic Materials
Reconfigurable field‐effect transistors, capable of being dynamically programmed during run‐time, overcome the static nature of conventional complementary metal‐oxide semiconductors by reducing the transistor count and the circuit path delay. Thereby, SiGe and Ge are predicted to boost drive currents, switching speed and to reduce power consumption. Nevertheless, Ge‐based reconfigurable field‐effect transistor prototypes have so far fallen short in reaching both the promised performance due to interface instability to their contacts and gate oxides, as well as in reaching the current–voltage symmetry necessary for circuit applicability. Here, a top‐down fabricated SiGe‐based reconfigurable transistor technology is reported that is comprised of a vertical Si‐Si0.67Ge0.33 heterostructure enabling the envisioned high and symmetric on‐currents of both n‐ and p‐type operation. Monolithic integration with single‐elementary crystalline Al contacts alleviates process variability compared to conventional Ni‐silicide/Ni‐germanide contacts and introduces an ultra‐thin Si interlayer providing stability and equal injection efficiency of holes and electrons. The implementation of a three top‐gate transistor in combination with a hysteresis‐free Si/SiO2/HfO2 gate stack enhances polarity control and leakage current suppression to limit static power dissipation. Importantly, the obtained Al‐Si‐SiGe multi‐heterojunction and advanced reconfigurable transistor design is the first Ge‐based technology showing the envisioned stability and performance enhancements.