30 December 2024 in High Voltage
Developing a stable insulation material stands as a crucial challenge for high‐voltage direct current (HVDC) cable insulation. This work proposes an alloying strategy to significantly enhance the breakdown strength and high‐temperature resistivity of cross‐linked polyethylene (XLPE). The strategy involves blending low‐density polyethylene (LDPE) with polystyrene (PS), resulting in a polymeric alloy. Confirmation of PS alloying within XLPE is supported by observed shifts in polyethylene miller indices (110) and (200) planes. The dicumyl peroxide used as a crosslinking agent demonstrates an ideal 1.41% enhancement in LDPE‐PS crosslinking. The integration of aromatic ethers in the cross‐linked network enhances temperature stability. Alloying PS at 220°C in XLPE leads to improved inter‐molecular interactions and increased interfacial area, creating a sea–island morphology that resolves voids and limits defect or crack propagation by forming additional trapping sites. The enhanced breakdown strength and reduced conductivity of XLPE‐PS are attributed to increased deep trapping sites and reduced carrier mobility resulting from alloying. The reduced conductivity at 70°C and 90°C demonstrates stability under electric fields. Remarkable breakdown strength improvements of 27.5% and 23.6% are observed at 30°C and 50°C. The proposed alloying strategy suggests replacing XLPE with advanced XLPE‐PS, offering promising prospects for HVDC insulation.
28 October 2024 in Journal of Applied Polymer Science
23 January 2025 in IEEE Transactions on Dielectrics and Electrical Insulation
The EHVDC cable has attracted tremendous attention owing to its high capacity and low loss for long-distance power transmission. Temperature stability has become one of the important issues for EHVDC cable system because of the thick insulation under stringent operational conditions. However, its relationship with cable manufacture and processing, for example degassing, is still missing. In this paper, we investigate the role of residual crosslinking by-product (e.g., cumyl alcohol) on thermal stability of EHVDC cable insulation by proposing a phase field model combined with finite element analysis. Results show that the long-time degassing process eliminates 20% cumyl alcohol from cable insulation, reducing its conductivity, which has negligible impact on the electric field distortion. Further thermal stability simulations suggest that the declined conductivity contributes to a decrease in leakage current and dielectric loss within cable insulation, thus effectively reducing the risk of thermal runaway. This work proposes an effective approach to quantitatively analyze the role of crosslinking by-products and provides a guideline for developing high-reliability EHVDC cable systems.
30 January 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
The cross-linking byproducts affecting the conductivity of cross-linked polyethylene (XLPE) determine the electric field distribution and temperature stability of cable insulation, and thus the detection of residual cross-linking byproducts plays an important role on the reliability of High Voltage Direct Current (HVDC) cable system. This paper employs the time-dependent polarization current measurement to investigate the dielectric relaxation in XLPE with different contents of cross-linking byproduct at extra-low frequency (ELF). The results show that two Debye-type dielectric relaxations appear at the frequency range of 10 -4 ~10 -3 Hz (defined as α relaxation) and 10 -3 ~10 -2 Hz (defined as β relaxation) respectively, in which the associated static permittivity and the peak losses are proportional to the byproduct contents for the specimens with different degassing time. Further pulsed electro-acoustic measurement (PEA) shows that β relaxation time coincides with time length for accumulation of hetero-charge near electrodes caused by the ionization of byproducts. And the time-dependency of weight loss for the specimen suggests α relaxation might be responsible for the dissipation of cross-linking byproduct during degassing. Our work may shed light on a promising non-destructive approach to detecting the level of residual cross-linking byproducts through dielectric relaxation measurement at extra-low frequency.
7 September 2026 in Journal of Applied Polymer Science