In this paper, crosslinked polyethylene-polystyrene (XLPE-PS) composites with different degrees of crosslinking were fabricated by using different crosslinking agent contents and their direct current (DC) breakdown performance at 30~90 °C was investigated. Results show that with the increase of the degree of crosslinking, the crystallinity of XLPE-PS composites decreases gradually, but their DC breakdown strength demonstrates an increasing trend at 30~90 °C and the enhancement also increases with the rise of temperature. And as the degree of crosslinking increases, the elastic modulus of XLPE-PS composites is reduced and the loss tangent peak temperature decreases but the peak shifts to a lower value, which reveals the suppression of the relaxation process for crystallites. It is believed that high DC breakdown strength with good temperature stability for XLPE-PS composites with a larger degree of crosslinking is attributable to the presence of PS and suppression in the formation of crystallites due to crosslinking.
Enhancing the energy storage properties of dielectric polymer capacitor films through composite materials has gained widespread recognition. Among the various strategies for improving dielectric materials, nanoscale coatings that create structurally controlled multiphase polymeric films have shown great promise. This approach has garnered considerable attention in recent years due to its effectiveness. This review examines surface-coated polymer composites used for dielectric energy storage, discussing their dielectric properties, behaviors, and the underlying physical mechanisms involved in energy storage. The review thoroughly examines the fabrication methods for nanoscale coatings and the selection of coating materials. It also explores the latest advancements in the rational design and control of interfaces in organic–inorganic, organic–organic, and heterogeneous multiphase structures. Additionally, the review delves into the structure–property relationships between different interfacial phases and various interface structures, analyzing how nanoscale coatings the impact dielectric constant, breakdown strength, conduction and charge transport mechanisms, energy density and efficiency, thermal stability, and electrothermal durability of polymeric capacitor films. Moreover, the review summarizes relevant simulation methods and offers computational insights. The potential practical applications and characteristics of such nanoscale coating techniques are discussed, along with the existing challenges and practical limitations. Finally, the review concludes with a summary and outlook, highlighting potential research directions in this rapidly evolving field.
Low direct-current (DC) conductivity is one of the most desired characteristics for crosslinked polyethylene (XLPE) as a high-voltage DC cable insulation material. In this Letter, a correlation between the DC conductivity and cross-linking characteristics of XLPE-polystyrene (PS) composites at 50 °C was studied. Experimental results show that by adjusting the cross-linking structure, different trap distribution characteristics for XLPE-PS composites were realized. With the increase in the cross-linking agent content, DC conductivities of XLPE-PS composites tend to decrease, and the introduced average trap depth increases correspondingly. An increase of 0.07 eV for average charge trap depth in XLPE-PS composites could be acquired in the test range. It is considered that the increase in the average trap depth reduces the carrier mobility, contributing to the reduction of DC conductivity for XLPE-PS composites. Thus, the DC conductivity and average trap depth of XLPE composites show a strong relevance. The results suggest that the interaction between PS particles and the matrix introduced by cross-linking plays a dominant role in determining the charge conduction for XLPE-PS composites.