30 January 2025 in IEEE Transactions on Vehicular Technology
Empowering cellular networks with augmented sensing capabilities is a key research area in sixth generation (6 G) communication systems. Recently, we have witnessed a plethora of efforts to devise solutions that integrate sensing capabilities into communication systems, i.e., integrated sensing and communication (ISAC), especially at millimeter-wave (mmWave) frequencies with large bandwidths. Despite the challenges posed by severe path loss and blockage at mmWave bands, this work incorporates reconfigurable intelligent surfaces (RISs) into ISAC systems to enhance both sensing and communication. To comply with the waveform utilized in current cellular systems, this paper studies mmWave orthogonal frequency-division multiplexing (OFDM) ISAC systems in the presence of RISs. Specifically, we jointly design the hybrid beamforming and RIS phase shifts to guarantee the sensing functionalities via minimizing the beampattern mean squared error at RIS, subject to signal-to-interference-plus-noise (SINR) and power constraints. The non-convexity of the investigated problem poses a challenge which we address by proposing a solution based on the penalty method and manifold-based alternating direction method of multipliers (ADMM). Simulation results demonstrate that both sensing and communication capabilities improve when the RIS is adequately designed. In addition, we discuss the tradeoff between sensing and communication.
29 September 2021 in IEEE Transactions on Vehicular Technology
The explosively increasing traffic demand in the fifth generation (5 G) mobile communication system has made the limited licensed spectrum quite competitive. Such status quo motivates the development of new radio (NR) based access to the unlicensed band, which is a promising solution for system performance enhancement. In this paper, we focus on the coexistence between the NR system and the WiFi system based on the duty cycle mechanism. Firstly, an optimization model is formulated to maximize the throughput of the NR system in the unlicensed band (NR-U) via the joint bandwidth and transmission opportunity allocation under the fairness requirement. Then, to solve this optimization problem, we convert it into a Markov decision process with continuous action space, based on which a deep deterministic policy gradient (DDPG) based coexistence algorithm is proposed. At last, simulation results show that the proposed algorithm can ensure the coexistence between the NR-U system and the WiFi system from three aspects. Firstly, the throughput improvements of the NR-U system under different fairness thresholds and different number of user equipments and access points are illustrated. Secondly, the proposed algorithm adapts to the dynamic situations of varying fairness thresholds and channel conditions. Thirdly, the effectiveness of the proposed algorithm is validated with at least 5.01% throughput improvement by comparing with proportional scheme, average scheme and Q-learning scheme.
30 December 2025 in IEEE Transactions on Wireless Communications
This work investigates a practical reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system, where a subset of RIS elements fail to function properly and reflect incident signals randomly towards unintended directions with attenuation, thereby degrading system performance. To date, no study has addressed such impairments caused by faulty RIS elements in ISAC systems. This work aims to fill the gap. First, to quantify the impact of faulty elements on ISAC performance, we derive the misspecified Cramér-Rao bound (MCRB) for sensing parameter estimation and signal-to-interference-and-noise ratio (SINR) for communication quality. Then, to mitigate the performance loss caused by faulty elements, we jointly design the remaining functional RIS phase shifts and transmit beamforming to minimize the MCRB, subject to the communication SINR and transmit power constraints. The resulting optimization problem is highly non-convex due to the intricate structure of the MCRB expression and constant-modulus constraint imposed on RIS. To address this, we reformulate it into a more tractable form and propose a block coordinate descent (BCD) algorithm that incorporates majorization-minimization (MM), successive convex approximation (SCA), and penalization techniques. Simulation results demonstrate that our proposed approach reduces the performance loss by 21.25% on average compared to the baseline where the presence of faulty elements is ignored. Furthermore, the performance gain becomes more evident as the number of faulty elements increases.
17 September 2021 in Composite Interfaces
In the manuscript, the liquid-phase deposition technique was used to successfully deposit an Al2O3 ceramic coating on the quartz fiber. The thickness of the coating was not uniform. The thickest part of the coating can reach to 1159 nm. The main coating formed is Al2O3, but there are still hydrous Al(OH)3. With the extension of the deposition time, the micro-morphology of the coating changed from nano-scale clusters to dense flakes. The coating had an amorphous structure. In this case, the coating effectively improved the mechanical properties of the quartz fiber at high temperatures, and the breaking load of the fiber increased with the extension of the deposition time. After high temperature annealing, the breaking load of the coated fiber deposited for 6 h was 126.1 N, compared to 50.3 N of the blank fiber. The protection mechanism of Al2O3 coating was studied from the aspect of microstructure. By observing the surface morphologies of blank fiber and coated fiber after high temperature annealing. It was found that the presence of the coating hindered the damage of the fiber surface by high temperature, and the defects on the fiber surface were reduced, so the mechanical properties were effectively improved. Graphical Abstract
1 November 2021 in Computers and Electronics in Agriculture