13 May 2024 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Passive tracking plays a fundamental role in numerous applications such as elderly care, security surveillance, and smart home. To utilize ubiquitous WiFi signals for passive tracking, the Doppler speed extracted from WiFi CSI (Channel State Information) is the key information. Despite the progress made, existing approaches still require a large number of samples to achieve accurate Doppler speed estimation. To enable WiFi sensing with minimum amount of interference on WiFi communication, accurate Doppler speed estimation with fewer CSI samples is crucial. To achieve this, we build a passive WiFi tracking system which employs a novel CSI difference paradigm instead of CSI for Doppler speed estimation. In this paper, we provide the first deep dive into the potential of CSI difference for fine-grained Doppler speed estimation. Theoretically, our new design allows us to estimate Doppler speed with just three samples. While conventional methods only adopt phase information for Doppler estimation, we creatively fuse both phase and amplitude information to improve Doppler estimation accuracy. Extensive experiments show that our solution outperforms the state-of-the-art approaches, achieving higher accuracy with fewer CSI samples. Based on this proposed WiFi-CSI difference paradigm, we build a prototype passive tracking system which can accurately track a person with a median error lower than 34 cm, achieving similar accuracy compared to the state-of-the-art systems, while significantly reducing the required number of samples to only 5%.
2 December 2025 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Angle estimation is one of the commonly used techniques for WiFi-based indoor passive localization. However, existing works on WiFi-based passive angle estimation generally fail under two conditions. First, when the target exhibits minimal motion or moves in certain directions, existing solutions are unable to resolve the target reflection path from strong static paths and other dynamic paths. Second, when the target angle is large (i.e. , exceeding ±45°), existing systems suffer from sharply increasing errors, which is traditionally attributed to the linear geometry of the antenna array. In this work, we provide the first in-depth analysis of the underlying causes behind these robustness issues and propose novel solutions to address them. Specifically, we propose using temporal signal differencing to eliminate strong static path components and introducing a dynamic differencing interval design to mitigate interference from other dynamic paths. To address the well-known issue of limited angle estimation range, we challenge the conventional wisdom and reveal that noise-induced phase wrapping, rather than array geometry, is the primary cause of large-angle errors. Correspondingly, we propose an iterative phase adjustment scheme that significantly expands the angle estimation range from ±45° to ±85°. We build a prototype system that achieves robust passive localization with an average angle error lower than 2°, outperforming the state-of-the-art with a mean error of 7°. Our angle estimation system works robustly even with only subtle respiratory motions. We believe this work represents a new milestone in WiFi-based angle estimation, moving one fundamental step toward high-precision and practical passive indoor localization. A demo video of our work is available at: https://youtu.be/2QLJ9JV7AAg.
2 December 2025 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
WiFi sensing has garnered significant attention from both academic and industrial communities, largely due to the widespread deployment of WiFi infrastructure. However, most existing WiFi sensing works rely on Channel State Information (CSI), which can only be extracted from very few commercial WiFi devices. The widespread adoption of new WiFi protocols, such as IEEE 802.11ac and 802.11ax, presents a valuable opportunity to leverage the widely available Beamforming Feedback Information (BFI) for WiFi sensing. Several studies have explored the potential of BFI-based WiFi sensing. However, these works are limited to a specific number of antennas and cannot achieve fine-grained BFI sensing across an arbitrary number of antennas. In this work, we design and implement FreeBFI, the first BFI-based WiFi sensing system that can work with an arbitrary number of antennas. FreeBFI fully exploits the channel information and the SNR information contained in BFI to establish the relationship between BFI and target motion across arbitrary antenna counts. Furthermore, to extract fine-grained motion information from the established relationship, FreeBFI smartly fuses the information from multiple antennas and proposes a novel optimization algorithm to enhance the motion signal. To showcase the sensing capability of FreeBFI, we select two representative WiFi sensing applications: respiration monitoring and gesture recognition. We conduct comprehensive experiments covering a wide range of antenna counts and test the performance of FreeBFI on various WiFi devices. Experimental results demonstrate that FreeBFI not only delivers accurate and robust sensing performance under arbitrary antenna counts but also enhances sensing accuracy as all antennas are utilized. For respiration monitoring, FreeBFI significantly extends the sensing range from 4 m to 8 m. For gesture recognition, FreeBFI improves complex gesture recognition accuracy by over 20%. We believe this work marks a significant step toward the broader adoption of WiFi sensing on next-generation WiFi devices.
30 September 2026 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Highly reflective surfaces such as TV, whiteboard, and granite counters are common indoors. When human motion occurs near these surfaces, the transmitted Wi-Fi signal can undergo multiple specular reflections that involve both the moving target and the surrounding reflectors. These interactions give rise to secondary dynamic reflections (SDRs), additional time-varying signal components beyond the primary target reflection. SDRs can be comparable in strength to the desired sensing path, inducing non-negligible interference and significantly degrading Wi-Fi sensing performance. This paper presents SDR-Sense, a novel approach to recover target reflections in presence of strong SDRs. We analyze the spatial characteristics of SDRs and reveal their localized distribution within a sensing area. Two complementary metrics, Curvature Standard Deviation (CSD) and Interference to Sensing Path Loss Ratio (ISPLR), are proposed to detect periods of strong-reflection interference. SDR-Sense further identifies optimal differential intervals and applies CSI differencing to successively recover target reflections during interfered periods, thereby enhancing the sensing signal-to-interference ratio. Implemented on commodity Wi-Fi devices, SDR-Sense is evaluated through two representative sensing applications, namely, human trajectory tracking and gesture recognition, across diverse participants and environments. Experimental results show substantial performance gains over existing methods and demonstrate its potential to benefit a broad range of downstream Wi-Fi sensing tasks.
30 September 2026 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
With the proliferation of WiFi-enabled IoT devices in modern indoor environments, low-cost passive WiFi localization has attracted significant attention. Unlike time-of-flight (ToF) and angle-of-arrival (AoA)-based approaches, which are constrained by limited bandwidth and antenna counts, Doppler-based passive WiFi localization offers higher accuracy and is applicable to a wider range of low-cost commodity devices. However, due to the position dependency of Doppler speed, existing Doppler-based methods rely on an iterative velocity reconstruction process that requires knowledge of the target's initial position and suffers from severe error accumulation. These limitations hinder the practicality of Doppler-based localization in real-world deployments. In this paper, we propose Wi-WeiFuse (WiFi Weighted Fusion), a novel framework that enables Doppler-based, long-duration, and high-precision localization without requiring knowledge of the target's initial position. Instead of relying on velocity reconstruction and treating the position dependency of Doppler speed as a problem to overcome, Wi-WeiFuse leverages this dependency to directly infer position information from multi-link Doppler speeds. To realize Wi-WeiFuse, we propose a spatiotemporal optimization method that ensures precise position estimation despite interference from local optima induced by complex mappings and random noise. To further improve performance, we introduce a weighted multi-link fusion scheme and theoretically derive the optimal weights, ensuring that Wi-WeiFuse is resilient to quality heterogeneity across distributed links. We derive the DSC-Metric as an optimal fusion weight to address the issue of lacking ground-truth measurements required by the theoretically optimal weights. Extensive experiments show that, without requiring knowledge of the target's initial position, Wi-WeiFuse achieves high-precision localization even over trajectories as long as 100 m. When the trajectory length is 15 m, Wi-WeiFuse reduces the localization error to 26.82% of that of the state-of-the-art baseline, and this ratio further decreases to 3.1% in the 100 m long-trajectory setting.