12 June 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
The passive WiFi sensing research has largely centered on activity sensing using fixed-location WiFi transceivers, leading to the development of several theoretical models that aim to map received WiFi signals to human activity. Of these models, the Fresnel zone model has shown to be particularly noteworthy. However, the growing popularity of mobile WiFi receivers has not been matched by corresponding research on mobile receiver-based theoretical models. This paper fills this gap by presenting the first theoretical model to quantify the impact of moving a moving receiver for WiFi sensing. We propose a novel dynamic Fresnel zone model in the free space of an indoor environment, which takes the form of a cluster of concentric hyperbolas centered on the transmitter and reflection subject. We examine three properties of this model, i.e., relating the variation in RF signals received by the receiver to the position and orientation of the human, the movement of the receiver, and the presence of other objects in the environment. To validate this model, we develop a prototype system and conduct extensive experiments. The results are consistent with our theoretical analysis, and the system is able to detect the direction of the transmitter with an accuracy of 10° or better, measure the receiver's relative motion displacement within 1 cm a millimeter-level accuracy, and classify five receiver-side activities with an accuracy of 98%. Our work moves a significant step forward in WiFi sensing and may potentially open up new avenues for future research.
13 May 2024 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Passive tracking plays a fundamental role in numerous applications such as elderly care, security surveillance, and smart home. To utilize ubiquitous WiFi signals for passive tracking, the Doppler speed extracted from WiFi CSI (Channel State Information) is the key information. Despite the progress made, existing approaches still require a large number of samples to achieve accurate Doppler speed estimation. To enable WiFi sensing with minimum amount of interference on WiFi communication, accurate Doppler speed estimation with fewer CSI samples is crucial. To achieve this, we build a passive WiFi tracking system which employs a novel CSI difference paradigm instead of CSI for Doppler speed estimation. In this paper, we provide the first deep dive into the potential of CSI difference for fine-grained Doppler speed estimation. Theoretically, our new design allows us to estimate Doppler speed with just three samples. While conventional methods only adopt phase information for Doppler estimation, we creatively fuse both phase and amplitude information to improve Doppler estimation accuracy. Extensive experiments show that our solution outperforms the state-of-the-art approaches, achieving higher accuracy with fewer CSI samples. Based on this proposed WiFi-CSI difference paradigm, we build a prototype passive tracking system which can accurately track a person with a median error lower than 34 cm, achieving similar accuracy compared to the state-of-the-art systems, while significantly reducing the required number of samples to only 5%.
12 June 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
In the past few years, a large range of wireless signals such as WiFi, RFID, UWB and Millimeter Wave were utilized for sensing purposes. Among these wireless sensing modalities, WiFi sensing attracts a lot of attention owing to the pervasiveness of WiFi infrastructure in our surrounding environments. While WiFi sensing has achieved a great success in capturing the target's motion information ranging from coarse-grained activities and gestures to fine-grained vital signs, it still has difficulties in precisely obtaining the target size owing to the low frequency and small bandwidth of WiFi signals. Even Millimeter Wave radar can only achieve a very coarse-grained size measurement. High precision object size sensing requires using RF signals in the extremely high-frequency band (e.g., Terahertz band). In this paper, we utilize low-frequency WiFi signals to achieve accurate object size measurement without requiring any learning or training. The key insight is that when an object moves between a pair of WiFi transceivers, the WiFi CSI variations contain singular points (i.e., singularities) and we observe an exciting opportunity of employing the number of singularities to measure the object size. In this work, we model the relationship between the object size and the number of singularities when an object moves near the LoS path, which lays the theoretical foundation for the proposed system to work. By addressing multiple challenges, for the first time, we make WiFi-based object size measurement work on commodity WiFi cards and achieve a surprisingly low median error of 2.6 mm. We believe this work is an important missing piece of WiFi sensing and opens the door to size measurement using low-cost low-frequency RF signals.
18 December 2023 in IEEE Internet of Things Journal
Recent advancements in Wi-Fi-based sensing technologies have enabled effective hand gesture recognition. However, most studies focus on single gesture recognition and fail to recognize naturally performed continuous gestures without pauses in transitions. The main challenges include diverse and uncertain transitions in continuous gesture recognition, making it difficult to segment and identify gestures from a stream of continuous hand movements. In this article, we introduce a new method to recognize continuously performed gestures from a set of predefined gestures (e.g., digits) without requiring a pause in transitions. Instead of segmenting gestures at the gesture-transition level, we segment the stream into basic fractions that depict exclusive moving patterns of gestures. We propose a novel feature called meta motion, which geometrically characterizes different basic hand movements. Leveraging this feature, we use a back-tracking searching-based algorithm to identify gestures from the sequence of meta motions. Based on this approach, we develop a prototype system, WiCGesture, on commodity Wi-Fi devices. WiCGesture is the first system engaging in continuous gesture recognition using Wi-Fi signals. Evaluation results show that WiCGesture effectively recognizes continuous gestures from two gesture sets, significantly outperforming state-of-the-art methods.
7 February 2025 in IEEE Transactions on Mobile Computing
Indoor mmWave-based sensing technologies have garnered substantial interest from both the industrial and academic. Yet, the intrinsic challenge posed by the limited Field-of-View (FOV) of mmWave radars significantly restricts their coverage. This limitation necessitates careful selection of installation positions and orientations to optimize performance, thereby severely curtailing the versatility and widespread adoption of these systems. Traditionally, expanding coverage involved increasing the number of radar units. This paper introduces a novel approach to enhance the FOV by incorporating mobility, achieved by affixing the radar onto a pan-tilt unit capable of rotating along both the horizontal and azimuthal. Nevertheless, the disparity between the pan-tilt and the radar presents significant challenges for accurately rotating the radar's orientation. To mitigate this, we propose an automated calibration algorithm for radar and pan-tilt, ensuring precise calibration. Additionally, we have devised a radar orientation adjustment algorithm intended to automatically align the radar's FOV with the positions of detected objects to facilitate various applications. Through three case studies, we have demonstrated that mmRotation can greatly expand the sensing range, enabling support for multiple applications on a single radar, such as vital signs monitoring and fall detection. Comprehensive experimental results underscore that our system surpasses the current state-of-the-art (SOTA).
2 December 2025 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Angle estimation is one of the commonly used techniques for WiFi-based indoor passive localization. However, existing works on WiFi-based passive angle estimation generally fail under two conditions. First, when the target exhibits minimal motion or moves in certain directions, existing solutions are unable to resolve the target reflection path from strong static paths and other dynamic paths. Second, when the target angle is large (i.e. , exceeding ±45°), existing systems suffer from sharply increasing errors, which is traditionally attributed to the linear geometry of the antenna array. In this work, we provide the first in-depth analysis of the underlying causes behind these robustness issues and propose novel solutions to address them. Specifically, we propose using temporal signal differencing to eliminate strong static path components and introducing a dynamic differencing interval design to mitigate interference from other dynamic paths. To address the well-known issue of limited angle estimation range, we challenge the conventional wisdom and reveal that noise-induced phase wrapping, rather than array geometry, is the primary cause of large-angle errors. Correspondingly, we propose an iterative phase adjustment scheme that significantly expands the angle estimation range from ±45° to ±85°. We build a prototype system that achieves robust passive localization with an average angle error lower than 2°, outperforming the state-of-the-art with a mean error of 7°. Our angle estimation system works robustly even with only subtle respiratory motions. We believe this work represents a new milestone in WiFi-based angle estimation, moving one fundamental step toward high-precision and practical passive indoor localization. A demo video of our work is available at: https://youtu.be/2QLJ9JV7AAg.