Xi Chen

Xi Chen

Auto-generated profile, based on publicly available information

Xi Chen

School of Electrical and Electronic Engineering, University College Dublin, Dublin 4, Ireland

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 September 2021 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
YHYizhe Hu
Yizhe Hu
XCXi Chen
Xi Chen
TSTeerachot Siriburanon
Teerachot Siriburanon
JDJianglin Du
Jianglin Du
VGVivek Govindaraj
Vivek Govindaraj
RSRobert Staszewski
Robert Staszewski
This article presents a millimeter-wave (mmW) frequency synthesizer based on a new charge-sharing locking (CSL) technique. A charge-preset capacitor is introduced for charge sharing with a resonant LC -tank for phase correction, while the resulting charge residue on the sharing capacitor is processed by a digital frequency-tracking loop (FTL) against the process, voltage, and temperature (PVT) variations. Furthermore, a general phase noise (PN) theory of CSL, with injection locking (IL) being a special case, is proposed based on a unified multirate ${z}$ -domain model, supporting any frequency division ratio ${N}$ and CSL (or IL) strength $\beta $ . The new theory sheds light not only on all IL-like PN phenomena (chiefly, its “loop” bandwidth being up to half of the reference frequency, and the oscillator PN increasing 3 dB beyond the “loop” cutoff frequency) but also on how to choose the CSL bandwidth via the sharing capacitor in order to optimize the rms jitter performance. The prototype in 28-nm CMOS achieves 77-fs rms jitter in 21.75—26.25 GHz while consuming 16.5 mW for mmW quadrature frequency generation.

26 January 2023 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
XCXi Chen
Xi Chen
YHYizhe Hu
Yizhe Hu
TSTeerachot Siriburanon
Teerachot Siriburanon
JDJianglin Du
Jianglin Du
RSRobert Staszewski
Robert Staszewski
AZAnding Zhu
Anding Zhu
In this article, we present a low phase noise (PN) mm-wave quadrature digitally controlled oscillator (DCO) exploiting transformers for class-F operation and harmonic extraction. A third transformer coil is added for the inter-core coupling with the source terminals of the switching transistors. We identify that the inter-core coupling in quadrature oscillators causes an asymmetric flicker noise current, thus degrading flicker PN. As a remedy, we propose a deliberate drain-to-gate phase shift of the switching transistors by means of capacitive loading to fix this asymmetry. The ±90° I/Q mode ambiguity is also resolved by introducing another phase shift in the source-coupling; it is explained by a simplified analysis with phasor diagrams. Fabricated in the TSMC 28-nm LP CMOS, the prototype achieves PN of −112 dBc/Hz and figure-of-merit (FoM) of −185 dB at 1-MHz offset of 25.7 GHz. The measured flicker PN corner is 140–250 kHz and image rejection ratio (IRR) >47 dB over the whole 18% tuning range (TR). To the best of the authors’ knowledge, it is the best reported PN and IRR for a mm-wave quadrature oscillator.

26 August 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Open access
EKEnis Kobal
Enis Kobal
TSTeerachot Siriburanon
Teerachot Siriburanon
XCXi Chen
Xi Chen
HNHieu Minh Nguyen
Hieu Minh Nguyen
RSRobert Staszewski
Robert Staszewski
AZAnding Zhu
Anding Zhu
This paper presents a simple yet effective $G_m$ -boosting technique for improving gain and noise performance of millimeter-wave (mm-wave) low-noise amplifiers (LNAs) comprising triple-well transistors typically found in the modern bulk CMOS processes. The proposed technique uses a resistor that connects the p-well and deep n-well terminals of the triple-well transistor, leaving the terminals floating instead of conventionally connecting them to the ground and supply voltage. This arrangement exploits a leakage current through a diode formed between the drain/source and p-well of each transistor, thus autonomously setting its bulk potential for increased transconductance, while ensuring its robustness to the process variation. The improved isolation between the p-well and the substrate further improves the gain and noise performance. We provide a theoretical analysis of this floating resistor-based body biasing method and support it with simulation results. For experimental validation, a two-stage cascode LNA was designed and fabricated in 28-nm bulk CMOS. The measurement results show that 3.3–4 dB noise figure (NF) and 19.1–16.1 dB gain are achieved at 24.7–29.5 GHz. To ensure a fair comparison, another identical LNA with the normally expected triple-well biasing was also fabricated. The proposed method reveals a 0.6 dB improvement in minimum NF and an additional $\sim$ 3.5 dB gain without any significant linearity degradation.

7 December 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Open access
XCXi Chen
Xi Chen
YHYizhe Hu
Yizhe Hu
TSTeerachot Siriburanon
Teerachot Siriburanon
JDJianglin Du
Jianglin Du
RSRobert Staszewski
Robert Staszewski
AZAnding Zhu
Anding Zhu
This article presents a wide-band suppression technique of flicker phase noise (PN) by means of a gate–drain phase shift in a transformer-based complementary oscillator. We identify that after naturally canceling its second-harmonic voltage by the complementary operation itself, third-harmonic current entering the capacitive path is now the main cause of asymmetry in the rising and falling edges, leading to the $1/f$ noise upconversion. A complete $1/f^{3}$ PN analysis for the transformer-based complementary oscillator is discussed. By tuning gate–drain capacitance ratio, a specific phase-shift range is introduced at the gate and drain nodes of the cross-coupled pair to mitigate the detrimental effects of ill-behaved third-harmonic voltage, thus lowering the flicker PN. To further reduce the area and improve the PN in the thermal region, we introduce a new triple-8-shaped transformer. Fabricated in 22-nm FDSOI, the prototype occupies a compact area of 0.01mm 2 and achieves $1/f^{3}$ PN corner of 70kHz, PN of −110dBc/Hz at 1MHz offset, figure-of-merit (FoM) of −182dB at 9GHz, and 39% tuning range (TR). It results in the best FoM with normalized TR and area (FoM TA ) of −214dB at 1MHz offset.

14 July 2020 in IEEE Solid-State Circuits Letters
Verified
Journal Article
Open access
XCXi Chen
Xi Chen
YHYizhe Hu
Yizhe Hu
TSTeerachot Siriburanon
Teerachot Siriburanon
JDJianglin Du
Jianglin Du
RSRobert Staszewski
Robert Staszewski
AZAnding Zhu
Anding Zhu
The letter presents a triple-8-shaped transformer-based complementary oscillator. It features tiny area, wide tuning range (TR), electromagnetic compatibility (EMC), and low flicker phase noise (PN), combining the merits of both LC-tank and ring oscillators. We identify that after suppressing the 2nd harmonic voltage by the complementary operation itself, the 3rd harmonic current entering the capacitive path is now the main cause of asymmetry in the rising and falling edges, leading to the 1/f noise upconversion. By tuning the capacitance ratio between gate and drain nodes of the switching transistors, it mitigates the 3rd harmonic voltage and introduces a specific gate-drain phase shift, reducing the 1/f3 PN. Fabricated in 22-nm FDSOI CMOS, the prototype occupies an area of 0.01 mm and achieves 1/f3 PN corner of 70 kHz, PN of -110 dBc/Hz @1MHz and figure-of-merit (FoM) of -182 dB at 9 GHz, 39% TR, resulting in the best FoM with normalized TR and area (FoMTA) of -214 dB @1 MHz.

29 October 2021 in IEEE Solid-State Circuits Letters
Verified
Journal Article
Open access
JDJianglin Du
Jianglin Du
TSTeerachot Siriburanon
Teerachot Siriburanon
XCXi Chen
Xi Chen
YHYizhe Hu
Yizhe Hu
VGVivek Govindaraj
Vivek Govindaraj
RSRobert Staszewski
Robert Staszewski
This letter proposes a mm-wave fractional-N reference-oversampling (ROS) all-digital phase-locked loop (ADPLL) for 5G wireless applications utilizing a relatively low but standard reference frequency. The $4\times $ ROS phase detector (PD) increases the phase-detection rate $4\times $ in a power-efficient manner in order to reduce the in-band phase noise contributed from the PD. This improves the overall figure of merit (FoM) and locking speed. A class-F 3 oscillator generates both ~10GHz and its third harmonic. The former is fed to the feedback divider, while the latter is extracted to generate the ~30-GHz output. The fractional phase and reference distortions are compensated in digital with the assistance of DACs. The proposed ROS-ADPLL is implemented in 28-nm CMOS. Using a standard 50-MHz reference frequency, it achieves 237-fs rms jitter while consuming only 11.9mW, reaching best-in-class FoM jitter-N of −269.3dB.